What brand is the Passat's audio system?

1 Answers
McJune
07/29/25 6:23pm
The Passat's audio system is from the American brand FENDER. The most basic requirement for a car audio system is the ability to reproduce sound, which mainly includes three components: the head unit, speakers, and amplifier. The most direct way to evaluate the quality of an audio head unit is by examining its technical specifications. The key technical indicators of a car audio system are: 1. Output Power: Currently, most head units indicate music power, ranging between 40W and 60W, and the power should not be too high. 2. Frequency Response: The human ear can hear frequencies ranging from 20Hz to 20KHz, so this indicator should at least cover this range, and the wider, the better. 3. Signal-to-Noise Ratio: This refers to the ratio of music signal to noise. Generally, high-end car audio systems have a ratio above 90DB, and the higher this value, the better. 4. Harmonic Distortion: This indicator reflects the fidelity of sound reproduction. The lower the value, the higher the fidelity, and the better the audio effect.
Was this review help?
17
2
Share
More Forum Discussions

What is the appropriate tire pressure for the Avancier 370?

The normal tire pressure for the Avancier is generally around 2.5 bar. The recommended tire pressure for a car can usually be found on the back of the fuel tank cap or in the vehicle's manual. The hazards of over-inflated tires are as follows: Reduced tire friction and adhesion, affecting braking performance; causes steering wheel vibration and deviation, reducing driving comfort; accelerates wear on the central tread pattern, shortening tire lifespan; increases body vibration, indirectly affecting the lifespan of other components; overstretches the tire cords, reducing elasticity and increasing the load on the car during driving; decreases puncture resistance. When encountering sharp objects like nails or glass on the road, the tire is more prone to punctures, and impacts can cause internal cracks or blowouts, leading to tire bursts. The hazards of under-inflated tires are as follows: Increases friction with the road surface, leading to higher fuel consumption; makes the steering wheel heavy and prone to deviation, compromising driving safety; increases movement in various parts of the tire, causing abnormal heat due to excessive rolling; reduces the functionality of cords and rubber, leading to delamination or cord breakage, and excessive friction with the rim, damaging the bead area and causing abnormal wear; multiplies friction with the ground, rapidly raising tire temperature, softening the tire, and drastically reducing strength. High-speed driving may result in tire bursts; increases tire body deformation, making the sidewalls prone to cracks and generating flexing motion, leading to excessive heat, rubber aging, cord fatigue, and breakage, while also increasing the tire's contact area and accelerating shoulder wear.
9
4
Share

Is it necessary to install reinforcement bars for the BMW X3?

Reinforcement bars for the BMW X3 have limited effect and are not necessary to install. Enhancing body rigidity: During aggressive maneuvers such as acceleration, braking, high-speed cornering, or spirited driving, the vehicle body undergoes slight deformation. For vehicles with higher power output, this deformation is more pronounced and can reduce stability. Installing reinforcement bars can enhance body rigidity and minimize deformation. Improving cornering performance: By increasing the overall rigidity of the chassis and reducing centrifugal force, as well as suppressing deformation caused by body twisting, reinforcement bars can improve cornering performance.
7
5
Share

What Causes Sudden Clutch Failure in Baojun 560?

Baojun 560 sudden clutch failure reasons are as follows: Lack of lubrication in the actuating mechanism: Due to insufficient lubrication in the clutch system's operating mechanism, the clutch stroke is too small, resulting in abnormal clutch return. Check the transmission: If abnormal noise persists after lubrication, it may indicate a transmission malfunction, requiring a thorough inspection and possible repair. Excessive wear: Excessive wear of the clutch can cause the release bearing to rotate at high speeds continuously when the clutch is depressed, reducing the bearing's lifespan. Pressure plate spring breakage: Severe noise when depressing the clutch pedal may be caused by a broken pressure plate spring.
8
3
Share

What are the features of the Envision?

Automatic wipers: This feature is very convenient to use and easy to activate. Simply switch the wiper to the intermittent mode to turn on the rain sensor, and the wiper will automatically adjust its frequency based on the amount of rainfall. HBA automatic high beam function: To activate the HBA automatic high beam function, pull the steering wheel's turn signal lever towards the front of the vehicle twice in succession. LKA lane keeping function: The LKA lane keeping function is a great tool for highway cruising, especially on freeways. Once activated, it automatically engages when the vehicle speed reaches 80 km/h or above and deactivates when the speed drops below 80 km/h.
5
0
Share

What are the BMW brand models?

BMW (Bayerische Motoren Werke AG) primarily offers three major vehicle categories: sedans, sports cars (including the 6 Series Gran Coupe), and SUVs. The sedan lineup consists of four series: the 1 Series (compact sedan), 3 Series (small luxury sports sedan), 5 Series (mid-size luxury sedan, known as the executive sedan in China), and 7 Series (full-size luxury sedan). About BMW: BMW (abbreviated from Bayerische Motoren Werke) is a German automotive brand under the BMW Group. It features four model lines: i, X, Z, and pure numeric series (1, 2, 3, etc.), along with the M series (BMW's official high-performance division) which enhances these base models. The BMW logo's B.M.W. stands for Bavarian Motor Works, with its colors and design derived from the coat of arms of Bavaria, where BMW is headquartered. BMW Intelligent All-Wheel Drive System: xDrive is an intelligent all-wheel-drive system independently developed by BMW. It is equipped on BMW SUVs and some high-performance sedans. The xDrive system enhances driving stability by dynamically adjusting torque distribution between the front and rear axles, thereby improving driving dynamics and enjoyment.
11
1
Share

Is the Encore GX a three-cylinder or four-cylinder engine?

The Encore GX does not have a four-cylinder model, only a three-cylinder. Single-acting cylinder: Only one end has a piston rod, and air is supplied from one side of the piston to generate pressure, which pushes the piston to produce thrust and extend, returning via spring or self-weight. Double-acting cylinder: Air is alternately supplied from both sides of the piston, producing force in one or two directions. Diaphragm cylinder: Uses a diaphragm instead of a piston, producing force in only one direction and resetting via spring. It has good sealing performance but a short stroke. Impact cylinder: This is a new type of component. It converts the pressure energy of compressed gas into the kinetic energy of the piston's high-speed (10–20 m/s) movement to perform work. The impact cylinder adds a middle cover with a nozzle and a drain port.
9
0
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.