What brand is the original battery for the Buick Excelle?

2 Answers
BlakelyMarie
08/30/25 8:29am
The original battery for the Buick Excelle is a Fengfan battery. Below is an introduction to the 2021 Excelle model: Introduction to the powertrain: The 2021 Excelle automatic light hybrid entry model is equipped with a 1.3L turbocharged 3-cylinder engine and a 6-speed automatic manual transmission. Introduction to the body dimensions: The length, width, and height are 4609mm, 1798mm, and 1486mm respectively, with a wheelbase of 2640mm. Introduction to the chassis: The drivetrain is front-wheel drive, with a front suspension of MacPherson independent suspension and a rear suspension of multi-link independent suspension.
Was this review help?
8
0
Share
OFernando
09/12/25 5:21am
I've been driving a Buick Excelle for five years, and the original battery is from the Varta brand, which is quite durable. Generally, new cars come equipped with this brand, and the battery life is around three years. Since I often drive long distances, I take extra care to avoid prolonged parking that could drain the battery. If the battery aging warning light stays on or the car struggles to start, it's time to replace it immediately. The 4S store offers original parts at a reasonable price, which gives peace of mind. Regularly checking the voltage and keeping it above 12 volts can save a lot of trouble.
Was this review help?
2
3
Share
Expand All
More Forum Discussions

How to Deal with Exactly 10% Over the Speed Limit?

Motor vehicles exceeding the speed limit by up to 10% will temporarily receive a warning without penalty. Below are relevant details about speeding penalties: On roads with speed limits below 50 km/h: Exceeding the speed limit by more than 10% but less than 20% results in a 50 yuan fine; exceeding by more than 20% but less than 50% results in a 100 yuan fine; exceeding by more than 50% but less than 70% results in a 300 yuan fine; exceeding by 70% or more results in a 500 yuan fine. On roads with speed limits between 50 km/h and 80 km/h: Exceeding the speed limit by more than 10% but less than 20% results in a 100 yuan fine; exceeding by more than 20% but less than 50% results in a 150 yuan fine; exceeding by more than 50% but less than 70% results in a 500 yuan fine; exceeding by 70% or more results in a 1000 yuan fine.
17
5
Share

How Long Can a Spare Tire Generally Last?

Spare tires can generally last for 4 years. Below is a related introduction to the types of spare tires: Full-size spare tire: The specifications of a full-size spare tire are exactly the same as the other four tires on the vehicle, allowing it to replace any one tire that is temporarily or permanently unusable. Non-full-size spare tire: The diameter and width of this type of spare tire are slightly smaller than the other four tires, so it can only be used as a temporary replacement and must be installed on non-driving wheels. Additionally, the maximum speed should not exceed 80 km/h. Run-flat tire: Run-flat tires are also known as safety tires, commonly referred to as "puncture-proof tires." The industry directly translates them as "tires that can run while flat."
12
3
Share

How Long Before You Can Roll Down Windows After Applying Car Explosion-Proof Film?

After the car film installation is completed, avoid rolling down the windows within 3 days in summer and 7 days in winter. The reason is that the glass is usually very tight right after the film is applied. During the process of opening and closing the windows, the edges of the car film can easily get rolled up or peeled, causing damage to the film. After applying the front windshield film, avoid directing the air conditioning towards the front windshield for 7 days. Similarly, after applying the rear windshield film, do not turn on the rear defogger for a week. Here are some precautions to take after applying car film: Choose a sunny location: Within a week after applying the car film, park your vehicle in a sunny place to ensure that the moisture inside the film evaporates fully. Avoid washing the car: Do not wash the car within 3 days of applying the film to prevent possible detachment caused by water.
11
2
Share

How to Deal with Oversized License Plate Mounting Holes?

Solutions for oversized license plate mounting holes are as follows: Using self-tapping screws for installation: Simple and convenient installation, only requiring a screwdriver for smooth installation. Slightly less secure, as screws or license plates may be lost when driving through waterlogged sections. Using riveting for installation: At the vehicle management office, the license plate can be riveted onto the bumper. Secure installation, but tools are hard to find. If the bumper is damaged, it will need to be re-riveted or installed using other methods. Using self-tapping screws with anti-theft bolts for installation: Secure installation, rust-proof, and offers some anti-theft capability. Anti-theft bolts need to be sourced independently, especially stainless steel anti-theft bolts, nuts, washers, and spring washers, all of which must be made of stainless steel.
14
4
Share

What Materials Are Inside Car Seats?

Car seat interiors consist of foam padding, with a metal frame inside, while the exterior is made of textile materials or genuine leather. Car seats are designed to provide drivers and passengers with a comfortable, safe, and easily operable seating position. They are categorized by location into front seats and rear seats. Front seats include components such as headrests, backrests, seat cushions, and armrests, whereas rear seats feature headrests, backrests, seat cushions, side bolsters, and armrests. The essential requirements for car seats are: 1. Proper positioning, especially ensuring the driver's seat is optimally placed; 2. Ergonomic design that prioritizes comfort while maintaining aesthetic appeal; 3. Reliable locking mechanisms to ensure safety.
14
0
Share

When did the China 6 vehicle emission standards come into effect?

From July 1, 2020, the China 6 emission standards for light-duty vehicles were implemented nationwide. Below is relevant information about China 6: Definition: The China 6 motor vehicle pollutant emission standards were established to implement the "Environmental Protection Law of the People's Republic of China" and the "Air Pollution Prevention and Control Law of the People's Republic of China," aiming to prevent pollution from the exhaust of compression-ignition and gas-fueled spark-ignition engine vehicles, protect the ecological environment, and safeguard human health. Proposal for Delay: The proposal to delay the nationwide implementation of the China 6 emission standards was mainly based on two considerations. First, due to the impact of the pandemic, there was concern about whether automakers could clear their existing inventory before the implementation of the China 6 standards. Second, the new China 6 standards involve particulate matter emission limits, requiring new vehicles to undergo relevant testing and verification. Since the resumption of work and production had not yet fully returned to normal, it was hoped that an appropriate delay would give automakers more time.
17
1
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.