What brand is the Mirage tire?

Why is the temperature gauge normal when the thermostat is broken?

Because the thermostat is designed to prevent the coolant temperature from dropping. Here are the relevant details: 1. How the thermostat works: The thermostat automatically adjusts the amount of coolant entering the radiator based on the coolant temperature, changing the circulation range to regulate the cooling system's capacity and ensure the engine operates within the appropriate temperature range. The thermostat must maintain good technical condition; otherwise, it will severely affect the engine's normal operation. 2. The role of the thermostat: To prevent the engine from becoming too cold. For example, after the engine reaches normal operating temperature, during winter driving, without a thermostat, the engine temperature might drop too low. In this case, the engine needs to temporarily stop the coolant circulation to ensure the temperature does not become excessively low. The most commonly used thermostat is the wax-type thermostat. When the coolant temperature is below the specified value, the refined paraffin inside the thermostat's temperature-sensing element remains solid, and the thermostat valve, under the spring's force, closes the passage between the engine and the radiator. The coolant returns to the engine via the water pump, creating a small circulation within the engine. When the coolant temperature reaches the specified value, the paraffin begins to melt, gradually turning into a liquid, expanding in volume, and compressing the rubber tube, causing it to contract. As the rubber tube contracts, it exerts an upward thrust on the pushrod, which in turn applies a downward counterforce to open the valve. At this point, the coolant flows through the radiator and thermostat valve, then returns to the engine via the water pump, completing a large circulation.

20

4

Share

Can Regular Car Keys Be Duplicated?

Regular car keys can be duplicated. Replacing the key battery: Gently press the small switch on the back of the key to remove the mechanical key. Then, use the mechanical key to open the key cover by inserting it into the slot next to the key and gently prying it open. After removing the key compartment cover, you will see the position of the old battery. It is recommended to use a small flathead screwdriver for easier removal of the old battery. Ensure the new battery is installed with the positive side facing up. Reassemble the key cover and mechanical key, and verify that the key functions properly. Precautions for replacing car keys: The chip inside the car key contains an induction coil that can automatically charge. Different cars have different chips, so avoid mixing them up.

4

0

Share

What is the power source of new energy vehicles?

New energy vehicles are primarily powered by power batteries. Types of new energy vehicles: New energy vehicles mainly include hybrid electric vehicles (HEV), battery electric vehicles (BEV, including solar-powered vehicles), fuel cell electric vehicles (FCEV), other new energy vehicles (such as those using supercapacitors, flywheels, and other high-efficiency energy storage devices), gas-powered vehicles, liquefied petroleum gas vehicles, and hydrogen-powered vehicles. Battery types: The main types of power batteries used in new energy vehicles are: lithium-ion batteries, nickel-metal hydride batteries, fuel cells, lead-acid batteries, and supercapacitors.

19

5

Share

What is the size of a 14*2.125 tire?

14*2.125 tire refers to a tire where the number 14 indicates the width of the tire, which is 14 inches. The 2.125 refers to the inner diameter of the tire, also known as the tire width, which is 2.125 inches. Below is a detailed introduction to tires: 1. Replacement cycle: Tires should be replaced every 3 years. If the vehicle is driven 20,000 kilometers per year, replacement can be considered after 2 to 3 years. If the vehicle is driven approximately 10,000 kilometers per year, replacement should be considered after 4 to 5 years. Tires are often used under complex and demanding conditions, enduring various deformations, loads, forces, and high and low temperatures during operation. Therefore, they must have relatively high load-bearing performance, traction performance, and cushioning performance. At the same time, they are also required to have relatively high wear resistance and flex resistance, as well as relatively low rolling resistance and heat generation. 2. Tire specifications: The international standard tire code represents the section width and aspect ratio in millimeters. It is followed by: tire type code, rim diameter (in inches), load index (allowable load mass code), and allowable speed code. For example: In 175/70-R1477-H, 175 represents a tire width of 175 millimeters, 70 indicates that the tire's aspect ratio is 70%, meaning the section height is 70% of the width, the rim diameter is 14 inches, the load index is 77, and the speed rating is H.

11

5

Share

What Causes Unstable Idle Speed in Natural Gas Vehicles?

Unstable idle speed in natural gas vehicles may be due to uneven combustion of natural gas. Specific causes: Clogged idle air jets, malfunctioning idle control devices, weak spark in individual spark plugs, poor valve sealing, intake manifold leaks, incorrect ignition timing (too early or too late), or improper idle speed adjustment. Solutions: First, adjust the idle speed. If the issue persists after adjustment, check if the idle jets and idle air jets are clogged. If clogged, clean them with gasoline or acetone and blow through with compressed air. If not clogged, stabilize the engine at a certain RPM and listen for air leaks at the intake manifold or carburetor gaskets. If leaks are found, tighten screws or adjust gasket thickness to resolve.

3

0

Share

Does coasting downhill with the clutch pressed burn the clutch?

Coasting downhill with the clutch pressed will burn the clutch. Checking the clutch: If the clutch does not disengage completely, try pressing the clutch pedal all the way down to see if you can shift gears. If the clutch components are damaged, they need to be repaired or replaced, including the friction plate, pressure plate, and release bearing. Clutch slipping: The main causes of clutch slipping are insufficient friction on the clutch friction plate; shifting gears or disengaging before the clutch is fully engaged; driving for long periods with the clutch partially engaged or coasting with the clutch pressed; and applying excessive throttle when shifting or disengaging gears before they are fully engaged, leading to abnormal wear of the clutch plate.

6

3

Share

What brand is the Mirage tire?

Why is the temperature gauge normal when the thermostat is broken?

Can Regular Car Keys Be Duplicated?

What is the power source of new energy vehicles?

What is the size of a 14*2.125 tire?

What Causes Unstable Idle Speed in Natural Gas Vehicles?

Does coasting downhill with the clutch pressed burn the clutch?

How to Remove a License Plate Cap?

What is the solution for OBD faults in Auman trucks?

Is the Changan CS75 a China VI compliant vehicle?

What does the yellow exclamation mark light on a car mean?