What brand is the Mazda CX4 transmission?

1 Answers
SanFrancisco
07/30/25 9:10am
The brand of the Mazda CX4 transmission is Skyactiv. The functions of the transmission are: 1. To change the transmission ratio; 2. To expand the torque and speed of the driving wheels; 3. To enable the car to reverse; 4. To facilitate gear shifting or power output in the transmission. Taking the 2021 Mazda CX4 as an example, its body dimensions are: length 4637mm, width 1855mm, height 1524mm, with a wheelbase of 2700mm. The 2021 Mazda CX4 features a front MacPherson independent suspension and a rear E-type multi-link independent suspension. It is equipped with a 2.0L naturally aspirated engine, delivering a maximum horsepower of 158ps, a maximum power of 116kw, and a maximum torque of 202nm, paired with a 6-speed automatic transmission.
Was this review help?
16
3
Share
More Forum Discussions

Is the McLaren 570S a convertible model?

The McLaren 570S has a convertible model, which is based on the 570S Coupe and features a hardtop convertible design. The roof can be opened or closed within 15 seconds when the vehicle is traveling at speeds below 40km/h. With the convertible design, the car's weight increases by 46kg. Details about the McLaren 570S convertible model are as follows: 1. Exterior: The car is equipped with a newly designed spoiler. 2. Powertrain: The car is powered by an M838TE 3.8T twin-turbocharged V8 engine, delivering a maximum power of 419kW (570Ps) and a peak torque of 600Nm. It is paired with a 7-speed dual-clutch transmission.
19
2
Share

What Type of Engine Oil Does the RAV4 Use?

Toyota RAV4's original factory engine oil brand is Toyota Genuine Oil. If you want to change the oil during later maintenance, you can choose brands such as Shell, Mobil, Castrol, or Total. The official Toyota RAV4 manual recommends oil models of 0W-20, 5W-20, 5W-30, and 5W-40. Any oil model that meets these four specifications can be used. The viscosity of engine oil changes with temperature, so special attention must be paid to its performance under low and high temperatures. For example, in 5W-30, the first number indicates low-temperature fluidity. 5W means it can withstand temperatures as low as -30°C. The smaller this number, the better the low-temperature fluidity, making cold starts smoother. The latter number represents the kinematic viscosity of the oil at 100°C. A higher value means the oil can maintain viscosity better at high temperatures, which can also be understood as better lubrication performance under high temperatures. The method for changing the engine oil in a Toyota RAV4 is as follows: Wait for the engine temperature to cool down, and also allow the oil to flow back into the oil pan. Use a wrench to loosen the drain plug and place an oil pan underneath to catch the old oil until no more oil flows out. Start the engine for 30 seconds to allow the oil in the main oil passage to drain. Use a special wrench to remove the oil filter. Apply oil to the seal of the new oil filter and tighten it clockwise by hand. Add new oil through the engine valve cover filler port. Generally, fill about three-quarters of a bottle. Start the engine and let it run for 5 minutes. Check for leaks around the drain plug and oil filter. If there are leaks, perform necessary repairs. After stopping the engine, pull out the dipstick and check that the engine oil level is within the standard range.
19
3
Share

What is the method for replacing the air filter on a Mercedes-Benz GLS?

Mercedes-Benz GLS air filter replacement method is as follows: 1. Open the engine hood and remove the plastic panel with the Mercedes logo. 2. Disconnect three tubes, remove the upper cover plate, and take off the filter cover. 3. Use a T25 screwdriver to remove the screws, take out the old air filter, and install the new one. 4. Reassemble in reverse order and close the engine hood. The functions of the air filter are as follows: 1. During operation, the engine inhales a large amount of air. If the air isn't filtered, dust particles suspended in the air entering the cylinders will accelerate wear on piston assemblies and cylinders. 2. Larger particles entering between pistons and cylinders can cause severe "cylinder scoring," especially in dry, sandy working environments. 3. The air filter, installed in front of the carburetor or intake pipe, filters out dust and sand particles from the air, ensuring sufficient clean air enters the cylinders.
2
1
Share

What Colors Are Available for the Haval M6?

The Haval M6 offers five body color options: China Red, Modern Gray, Wisdom Brown, Simple White, and Classic Black. Detailed information about the Haval M6 is as follows: 1. The vehicle was designed by an international design team, showcasing its fashionable side under the premise of 'simple, refined, and safe' styling. The exterior design of this car aligns well with the aesthetic preferences of modern young consumers, featuring an overall youthful appearance. 2. In terms of colors, the white variant looks elegant and has high visibility. The gray option appears more technological and premium. The black version conveys solemnity and seriousness, giving a very steady impression.
19
0
Share

Is running a red light determined by the rear wheels or the front wheels?

Running a red light is generally determined by the rear wheels. Electronic cameras capture three photos to make the judgment: a photo of the vehicle crossing the stop line at the intersection, including the red light signal and license plate number; a photo of the vehicle completely passing the stop line, including the red light signal and license plate number; and a photo showing the vehicle continuing to move, comparing whether the vehicle's position has changed, including the red light signal and license plate number. Capturing these three photos confirms the vehicle has run a red light. The act of running a red light is clearly defined in the "Road Traffic Safety Law." Article 26 states that traffic signals consist of red, green, and yellow lights. A red light indicates prohibition of passage, a green light permits passage, and a yellow light serves as a warning. A red light is a traffic signal prohibiting passage, and if a vehicle passes through an intersection during a red light, it constitutes the traffic violation of running a red light. Here are some tips to avoid running a red light: First, look at the arrow light, then the circular light: Currently, there are two types of traffic lights: arrow traffic lights and circular traffic lights. When arrow lights are present, first observe the arrow light and then the circular light to avoid running a red light. Note: When encountering a circular red light, right turns are permitted. However, if the right-turn arrow is red, right turns are prohibited; otherwise, it will be penalized as running a red light. Brake in time: When the red light turns on, ensure the front of the vehicle does not cross the stop line. If the front wheels accidentally cross and the rear wheels follow, the electronic camera will capture it, resulting in a penalty for running a red light. If the front wheels have just crossed the stop line when the light turns red, do not proceed through the intersection; wait for the green light. Check the green light countdown before proceeding: When the green light flashes, if there is a countdown, use it to judge whether to proceed. If there is no countdown and the vehicle is close to the intersection with high speed, it may proceed to avoid running a red light due to late braking. If the speed is low and the vehicle is far from the intersection, brake immediately to avoid running a red light. Article 38 of the "Regulations for the Implementation of the Road Traffic Safety Law of the People's Republic of China" states: When the green light is on, vehicles are permitted to pass, but turning vehicles must not obstruct straight-moving vehicles or pedestrians. When the yellow light is on, vehicles that have already crossed the stop line may continue to pass. When the red light is on, vehicles are prohibited from passing. At intersections without non-motorized vehicle or pedestrian crossing signals, non-motorized vehicles and pedestrians should follow the motor vehicle signal. When the red light is on, right-turning vehicles may pass if they do not obstruct other vehicles or pedestrians. Running a red light is not considered illegal under the following circumstances: Extreme weather: When visibility is so low that even electronic police cannot clearly see the traffic lights, the evidence photos may be blurry. In such cases, accidental red-light running will not be penalized. Emergency situations: When transporting a critically ill patient to the hospital, running multiple red lights may be unavoidable. After delivering the patient, the driver can present proof from the hospital or the rescued individual to the traffic police for verification. If confirmed, the violation records will be cleared. If possible, calling an ambulance is recommended to avoid accidents caused by running red lights. Police direction: During peak hours, traffic police may temporarily direct traffic at key intersections. Drivers should follow the officers' hand signals. Yielding to special vehicles: Yielding to ambulances, fire trucks, or other special vehicles. If running a red light is captured by surveillance cameras while yielding, manual review will not record it as a violation. Even if recorded, drivers can apply for reconsideration at the traffic police department.
12
5
Share

Where is the production location of XPeng Motors?

XPeng Motors has two production locations, namely its self-built factory in Zhaoqing and a contract manufacturing facility by Haima Automobile in Zhengzhou. The following are relevant introductions about XPeng Motors: 1. XPeng Motors is an internet-connected electric vehicle brand under Guangzhou Xiaopeng Motors Technology Co., Ltd. 2. XPeng Motors' pure electric drive system is centered around the motor, battery, and electronic control. Among these, the motor controller, DCDC, and charger are placed in the front compartment, while the battery system is arranged under the floor of the passenger compartment. The initial version of XPeng Motors' motor achieved a power density of 10kW/L. 3. In terms of batteries, XPeng Motors' current battery pack has undergone four iterations of development, with an energy density close to 150Wh/kg. Unlike other domestic electric vehicle battery packs that use natural cooling or air cooling, XPeng Motors has designed a liquid-cooled battery pack, effectively addressing the issue of battery temperature rise.
4
2
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.