What brand is the manual transmission of the Geely Emgrand?

2 Answers
DeRyder
07/24/25 3:19am
The manual transmission of the new Geely Emgrand is independently developed by Geely, a domestic transmission. The automatic transmission comes from the Belgian company Punch, a world-renowned CVT transmission supplier. Transmission Introduction: A device that changes the speed ratio and direction of motion. Used in automobiles, tractors, ships, machine tools, and various machines to alter the torque, speed, and direction of motion transmitted from the driving shaft to the driven shaft under different working conditions. A gear-driven transmission generally consists of a housing and several gear pairs. Function of the Transmission: During vehicle operation, to adapt to different working conditions, the driving force and speed of the car need to vary within a certain range. However, the existing engine's torque and speed variation range cannot meet this requirement, hence the installation of a transmission.
Was this review help?
5
3
Share
DawsonRose
08/10/25 10:51pm
I've been driving a Geely Emgrand manual transmission for several years. The gearbox is developed by Geely themselves, with a specific model like the MT88 series. It shifts smoothly and isn't tiring even in city traffic jams. The clutch is well-designed and doesn't wear out easily. For maintenance, I change the gearbox oil every two years or 50,000 kilometers, using 75W-90 oil, which costs around 200 yuan—quite affordable. It's been reliable over the long term, and even at high speeds in higher gears, it feels stable. For beginners looking to buy a used Emgrand, remember to test the gear shifts multiple times during the test drive—if it feels smooth, it's in good condition, avoiding future repair hassles.
Was this review help?
11
2
Share
Expand All
More Forum Discussions

What is the method for wiring a seat heating switch?

Seat heating switch wiring method mainly includes: 1. First, test whether the ACC is powered. 2. When the ACC is disconnected, the main line also needs to be disconnected. 3. Pull the key to the power-off position to take power. 4. Secure the two wire ends, and finally tighten the seat wiring. Extended content: 1. Car seats are the seats used when riding in a car. 2. They can be roughly divided into the following parts: (1) Front seats: headrest, backrest, seat cushion, (armrest). (2) Rear seats: (headrest), backrest, seat cushion, side wings, (armrest).
2
3
Share

What are the steps to eliminate the wrench light on Mazda CX4?

First, press the one-touch start button of the CX5. Then press the INFO button on the left side of the multifunction steering wheel, followed by the SET button on the right side of the steering wheel. At this point, the central LCD screen will display the vehicle maintenance information. Finally, press the OFF button at the lower right of the steering wheel, and the small wrench light will be eliminated. If the engine oil is not replaced for a long time, it will cause significant harm to the engine. The lubrication effect will not be as effective as before, and the wear between parts will increase.
13
1
Share

Where is the dash cam connector located?

The dash cam connector is located in the fuse box, where it is wired to the fuse box via concealed wiring. This approach offers two advantages: firstly, the wiring is well-hidden for a cleaner appearance, and secondly, it does not occupy the cigarette lighter or USB port, which can then be used for charging mobile phones. The steps for wiring the dash cam are as follows: 1. To connect to the fuse box, there are specific requirements for the dash cam—only those with voltage regulators integrated into the wiring can be used; 2. The wiring method involves concealed wiring, which can be routed from the headliner along the A-pillar to the fuse box; 3. Power is drawn from the cigarette lighter fuse; 4. Remove the cigarette lighter fuse and use a test light to check the fuse socket—one contact should have power while the other does not. Wrap the non-powered end of the fuse leg and reinsert the fuse to complete the installation.
2
2
Share

How to Solve the High Fuel Consumption Issue of Haima Family Star?

After opening the engine cover, check each sensor connector one by one for looseness or breakage, gently adjust and reconnect each sensor; After removing the spark plugs, inspect their basic condition and find slight electrode erosion and minor carbon deposits; After inspection, it is suspected that the intake system has a fault causing excessive fuel consumption. Therefore, the air filter is removed for inspection, and it is found to be still usable; After cleaning the intake system components mentioned above, reassemble and restart the vehicle for inspection. Conduct acceleration tests to check for any exhaust pipe leaks; Then, thoroughly inspect the entire fuel system pipeline once again, and no fuel leaks are found after a detailed examination.
18
1
Share

What to Do When the Lavida Fails to Start?

If the battery is diagnosed as discharged, a jump start for the engine is required. Check the fuel gauge; if the fuel needle points below the E mark, it indicates that the fuel has been depleted, and refueling is necessary. If there is still fuel remaining, inspect whether the spark plugs and ignition coils are securely connected, and ensure the ignition coils are properly attached to the wiring harness connectors. If the engine makes a knocking sound with noticeably reduced performance and the temperature gauge shows overheating, it is essential to cool the xenon engine by parking the vehicle in a safe location and turning off the air conditioning.
9
0
Share

How to Cancel the Maintenance Light on the Refine S3?

The method to reset the maintenance light on the Refine S3 is: 1. Press the reset button and turn off the ignition switch; 2. Hold the reset button until the mileage is no longer displayed; 3. Hold the reset button and turn on the ignition again to reset. The functions of the maintenance light are: 1. To record the mileage of important components; 2. To remind the owner to perform maintenance. More relevant information is as follows: The Refine S3 is a compact SUV with body dimensions of length 4345mm, width 1765mm, height 1640mm, a wheelbase of 2560mm, and a fuel tank capacity of 45l. It is equipped with a 1.5L naturally aspirated engine, with a maximum power of 85kw and a maximum power speed of 6000rpm.
2
3
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.