What brand is the Levin car?

1 Answers
MacIsabella
07/30/25 12:00am
Levin is a car from GAC Toyota. Here is the relevant information: Interior: For the interior, the sports version adds red trim elements distributed on the door panels and center console, with the red and black color scheme enhancing the sporty feel. The overall design style continues that of the previous Levin model, with no significant changes. In terms of details, the front armrest now features a front and rear sliding function, improving practicality. Powertrain: For the powertrain, the gasoline version still uses the 1.2T+CVT combination, delivering a maximum power of 85kW and peak torque of 185N·m. The hybrid version is equipped with a 1.8L Atkinson-cycle engine and Toyota's THS-II hybrid system, with the engine producing a maximum power of 72kW and peak torque of 142N·m. The electric motor has a peak power of 53kW and peak torque of 163N·m, with the system's combined power output reaching 90kW.
Was this review help?
9
5
Share
More Forum Discussions

What is the correct sequence for gear shifting and acceleration in Subject 3?

The correct sequence for gear shifting and acceleration in Subject 3 is: coordinate the throttle and clutch for a smooth start; shift gears progressively for steady driving; keep eyes on the road and coordinate hands and feet; match speed with the appropriate gear. Below is an introduction to the content of the Subject 3 test: 1. The road driving skills test for Subject 3 generally includes: preparation before starting, simulated lighting test, starting, driving in a straight line, gear shifting operations, changing lanes, pulling over to the side, going straight through intersections, turning left at intersections, turning right at intersections, crossing pedestrian crossings, passing through school zones, passing bus stops, meeting oncoming vehicles, overtaking, making U-turns, and nighttime driving. 2. The safety and civilized driving knowledge test generally includes: requirements for safe and civilized driving operations, safe driving knowledge under adverse weather and complex road conditions, emergency handling methods for situations like tire blowouts, and post-accident handling knowledge.
3
0
Share

What Causes the Noise When Turning the Steering Wheel?

The reason for the noise when turning the steering wheel is that the power steering fluid cannot circulate smoothly due to blockage. Solutions: 1. Loosen and adjust the fixing screws of the housing; 2. Try to avoid holding the steering wheel at full lock for extended periods; 3. If full lock is necessary, keep the duration short to prevent damage to the power steering pump. If there is noise when turning the steering wheel while stationary, it may be due to the friction between the horn wire transmission spring steel plate and the steering wheel. Typically, this sound comes from inside the car and is a rustling friction noise. If the noise is a sharp squeaking sound, it could be caused by excessive or insufficient front wheel toe-in, resulting in tire scrubbing when the front wheels do not turn parallel during steering. The solution is to apply some lubricant at the friction point between the spring steel plate and the steering wheel.
6
4
Share

Where is BMW manufactured?

BMW is manufactured in Germany, and its car series include the 1, 2, 3, 4, 5, 6, 7, i, and M series. The 1 Series is a compact car, the 2 Series is a compact coupe, the 3 Series is a midsize car, the 4 Series is a midsize coupe, the 5 Series is a mid-to-large-size car, the 6 Series is a mid-to-large-size coupe, the 7 Series is a luxury D-segment car, the i Series is BMW's electric and hybrid series, and the M Series is BMW's high-performance and sports car version. The BMW 1 Series is a five-door hatchback, currently available in four models: the 116i, 120i, 118d, and 120d, equipped with either a 1.6-liter or 2.0-liter gasoline engine and two 2.0-liter diesel engines. The transmission options include a 5-speed manual or 6-speed manual, with the 2.0-liter models also offering a 6-speed automatic transmission. The entry-level 116i is powered by a 1.6-liter gasoline engine, delivering a maximum power of 85 kW and a maximum torque of 150 Nm.
15
0
Share

Do I need to wait for the red light when making a U-turn at a gap?

When making a U-turn at an intersection, you generally need to wait for the red light if turning left at the preceding traffic signal intersection. Typically, U-turns are not allowed. Whether a vehicle can make a U-turn without regard to the traffic signal depends on the actual situation or the relevant signs, markings, or "signal light" instructions on the road section. Some vehicles can make U-turns without looking at the signal light, while others must observe the signal. Relevant information about traffic signals is as follows: 1. Introduction: Traffic signals are lights that direct traffic operation, usually consisting of red, green, and yellow lights. A red light means stop, a green light means go, and a yellow light serves as a warning. 2. Control methods: The most basic control method is timed control at a single intersection. Line control and area control can also use timed control methods, known as static line control systems and static area control systems.
4
2
Share

Should You Use Cold or Warm Air to Defog the Inside of a Car?

When fogging occurs inside the car, warm air should be used for defogging in winter, while cold air is suitable for summer. Regardless of the season, opening the car windows can quickly remove fog after it forms inside the vehicle. Methods for defogging a car: Open windows for air circulation. If the fog is not heavy, slightly open both side windows to allow air convection inside the car. As the interior temperature gradually matches the outside temperature, the fog will dissipate. Use specialized defogging products, such as defogging sprays or defogging towels. Apply these defogging sprays to the inner surface of the car windows and wipe them clean. In addition to removing dirt from the glass, they form a thin transparent protective film that prevents moisture from condensing on the glass and forming fog. One application can prevent fogging for about ten days to half a month.
15
0
Share

How to replace the battery in a Mercedes-Benz E260 COUPE key?

Steps to replace the battery in a Mercedes-Benz E260 COUPE key: There is a button on the back of the key. Press and hold this button, then slide the back cover of the key forward to open it. The battery is located in the slot nearby. During the replacement process, be sure to pay attention to the battery model of the key and ensure the positive side faces upward during installation. After prying open the slot, remove the old battery and replace it with a new one. Then, reattach the back cover of the key. The Mercedes-Benz E260 COUPE is a mid-size luxury sedan under the Mercedes-Benz brand. The dimensions of this car are 4947 mm in length, 1860 mm in width, and 1470 mm in height, with a wheelbase of 2939 mm. The imported version of the Mercedes-Benz E-Class has a standard wheelbase, while the domestically produced models feature a long wheelbase.
7
3
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.