What brand is the Land Cruiser?

1 Answers
JacksonAnn
07/29/25 7:41pm
Land Cruiser is a sub-brand under Toyota Motor Corporation, produced by Toyota. Below is more information about the Land Cruiser: 1. The Land Cruiser belongs to Toyota's Land Cruiser series, produced by Toyota. In terms of appearance, it inherits the original design concept while incorporating a sense of freshness and advanced style of the new era, making it an off-road vehicle. This vehicle is equipped with numerous technologies, such as the Low-Speed Cruise Control Assist System, KSSS Kinetic Dynamic Suspension System, and other advanced features. Its exterior design is also very imposing, making it an excellent vehicle. 2. The Toyota Land Cruiser is an imported ORV (Off-Road Vehicle) produced by Toyota. The production of this vehicle has a history of over 60 years, dating back to 1951. It is known for its strong off-road capability and durability.
Was this review help?
15
5
Share
More Forum Discussions

What are the reasons for the Honda CRV air conditioning not cooling?

The reasons for the air conditioning not cooling are roughly as follows: 1. Insufficient refrigerant: Insufficient refrigerant causes the compressor not to work. When the refrigerant is insufficient, it will cause the air conditioning clutch to frequently engage, or even the compressor not to work. Check by bridging the low-pressure cycle switch. If it engages, it is mostly caused by refrigerant leakage. 2. Air conditioning clutch relay failure: The air conditioning clutch relay failure causes the compressor not to work. Check the condition of each terminal of the air conditioning clutch relay 14. There should be 12V voltage on terminals 30 and 85; terminal 87 should have a resistance of several ohms to ground; terminal 86 is the ground terminal provided by the PCM. After turning on the air conditioning, the resistance should be below 10Ω. Bridge terminals 30 and 87, and the clutch should engage. Otherwise, it is an air conditioning clutch relay failure (coil failure, poor coil grounding, or poor contact).
17
5
Share

What are the symptoms of a clogged radiator?

Consequences of a clogged car radiator: The coolant cannot circulate effectively between the radiator and the engine, reducing the radiator's cooling performance. The decrease in the radiator's cooling performance causes the engine temperature to rise rapidly. If the vehicle continues to be driven under these conditions, the engine may suffer from cylinder scuffing. Below is a partial introduction to the car radiator: 1. Main components: The radiator is part of the car's cooling system. The radiator in the engine's water cooling system consists of three parts: the inlet chamber, outlet chamber, main plate, and radiator core. 2. Main function: When the engine's water temperature is high, the water pump circulates water repeatedly to lower the engine's temperature, thereby protecting the engine. In winter, if the water temperature is too low, the water circulation stops to prevent the engine temperature from becoming too low.
17
1
Share

What are the hazards of a loose lower control arm ball joint?

The hazards of a loose lower control arm ball joint are as follows: it can cause the vehicle to deviate from its intended path, result in abnormal tire wear, steering wheel vibration, heavy steering, and may even lead to loss of vehicle control. Below are specific details about the symptoms of a damaged lower control arm ball joint: 1. Steering wheel: At high speeds, the steering wheel may vibrate, and there may be abnormal noises when driving on bumpy roads. 2. Safety: It directly affects comfort and safety. Below is related information on repairing a lower control arm ball joint: 1. Jack: Use a jack or lift to raise the vehicle, then continuously shake the wheel to check for play and determine whether the steering linkage ball joint or the upper/lower control arm ball joint is damaged. 2. Hand shaking: Hold the tie rod or drag link and shake it left and right to check for looseness. 3. Road judgment: If abnormal noises occur when turning at large angles, it indicates damage to the ball joint.
19
3
Share

What to Do If Driver's License is Revoked? Do I Need to Retake the Test?

If your driver's license is revoked due to not being renewed for more than one year, you need to retake the subject one test; if it is revoked for other reasons, you must retake subjects one through four. Below are the specific methods for reinstating a revoked driver's license: 1. Irrecoverable situations: Death, failure to meet physical conditions, loss of civil capacity, or exceeding the specified age all make the license irrecoverable. 2. Expired without renewal: If the license has expired for less than a year, you can simply bring your ID and driver's license to the DMV for renewal. If it's over a year, you need to retake subject one and pass; if it's over three years, you need to retake all tests. 3. Blacklisted: If your license was locked/blacklisted before revocation, you must complete relevant procedures and pass the review at the DMV to unlock and remove it from the blacklist.
12
5
Share

How to Use the Air Conditioning in a 2018 Volkswagen Sagitar?

The air conditioning control area of the Sagitar is located below the center console. Activating the AUTO mode will allow the air conditioning system to automatically adjust the blower speed and airflow distribution. Below is a detailed introduction to each button of the Sagitar's air conditioning system: 1. A/C Button: Compressor switch. After activation, the compressor starts cooling. 2. FRONT Button: Front window defroster switch. When turned on, the air outlet blows air towards the front windshield. 3. REAR Button: Rear window defroster switch. When turned on, the rear windshield heating wire is activated. 4. Use of Internal and External Circulation: When driving in heavily polluted weather, be sure to switch to internal circulation mode.
13
5
Share

How to Distinguish the Authenticity of 3M Car Film?

Methods to identify the authenticity of 3M car film include: observing the appearance of the heat-insulating film, smelling the film up close, and paying close attention to the film application effect. The specific details are as follows: 1. Observe the appearance of the heat-insulating film: Inferior films usually have a darker color to block a large amount of visible light. After exposure to sunlight, the color of the film will fade, mainly because the adhesive layer of the film volatilizes after exposure, causing color changes. More alarmingly, inferior films use ordinary, cheap materials and curing processes, which can partially melt under sunlight, causing optical distortion and posing significant driving hazards. 2. Smell the film up close: You can ask the store for scraps of the heat-insulating film and smell them up close. If you detect a strong, pungent odor, it can basically be judged as an inferior film, mainly due to the use of harmful chemical adhesive layers during the film manufacturing process.
17
1
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.