What brand is the jl473zq2 engine?

What are the production capacities of BYD DMi?

BYD DMi production capacities include the DMi vehicle series, Qin DMi, Huanbi series, Song Plus-DMi, etc. Below is a partial introduction regarding BYD DMi production capacities: 1. Overall trend: BYD DMi products account for 47.13% of all BYD new energy vehicles and 28.7% of total sales. It can be said that the strategy of DMi products has achieved significant breakthroughs within three months. The sales of the DMi vehicle series are gradually beginning to impact the sales of fuel vehicles and other non-DMi models. The sales of the Qin fuel version continue to remain around 200-300, while the sales of Song EV and DM models are also continuously decreasing. 2. Product structure: From the perspective of product structure, the insured volume of fuel vehicles is significantly higher than the wholesale sales volume, basically being in the 'inventory clearance phase.'

3

5

Share

Why Did Mercedes-Benz Discontinue Run-Flat Tires?

Mercedes-Benz discontinued run-flat tires due to their high noise levels and poor comfort. Here are some details about run-flat tires: 1. Disadvantages: Run-flat tires are relatively stiff, so they can feel more jarring when driving over bumpy roads. Additionally, run-flat tires of the same grade are slightly more expensive than regular tires. 2. Performance: After a blowout, run-flat tires allow the car to continue driving at up to 80 km/h for approximately 80 kilometers, which is sufficient to reach the nearest repair shop for a tire replacement. Therefore, Mercedes-Benz vehicles do not need to carry a spare tire. 3. Functionality: Run-flat tires not only enable continued driving after a loss of pressure but also enhance safety. In the event of a blowout, run-flat tires do not immediately collapse because their sidewalls are exceptionally thick, providing strong support to prevent the vehicle from rolling over. Furthermore, vehicles equipped with run-flat tires do not require a spare tire, allowing continued driving without immediate tire replacement, offering convenience and additional trunk space.

16

1

Share

How to Properly Use the Clutch for Beginners?

The correct method of using the clutch is as follows: 1. Correct operation when starting: The key points for operating the clutch pedal when starting are "fast first, slow second, and linkage third." That is, lift the pedal quickly at the beginning, then slow down slightly when the clutch reaches the semi-engagement point (at this point, the engine sound changes), and gradually lift the pedal during the process from engagement to full connection. While lifting the clutch pedal, gradually press the accelerator pedal according to the engine resistance to ensure a smooth start. 2. Correct operation when shifting gears: When shifting gears while driving, quickly press and release the clutch pedal without prolonged semi-engagement, as this will accelerate clutch wear. Additionally, pay attention to coordinating with the accelerator. To ensure smooth shifting and reduce wear on the gearbox and clutch, it is recommended to use the "double-clutch shifting method." Although this method is more complex, it is an effective way to save both the car and money. 3. Correct use during braking: While driving, except for low-speed braking to stop, avoid pressing the clutch pedal in other braking situations. The correct method for low-speed braking to stop is to first press the brake pedal and then the clutch pedal to bring the car to a smooth halt.

4

5

Share

How to Control Speed When Driving an Automatic Car?

Methods to control speed when driving an automatic car include: 1. Shift into a low gear and use the engine to control speed; 2. Gently press the accelerator; 3. Apply the brakes. The correct method to park an automatic car is to shift the gear to N (Neutral) after the car comes to a complete stop, engage the handbrake and turn off the engine, then shift the gear to P (Park). The function of an automatic transmission is to utilize planetary gear mechanisms for gear shifting. It can automatically shift gears based on the degree of accelerator pedal pressure and changes in vehicle speed, allowing the driver to simply control the speed by operating the accelerator pedal. The gear positions on an automatic car are: 1. P (Park) for parking and starting; 2. R (Reverse) for reversing; N (Neutral) for no gear engagement; 3. D (Drive) for forward movement, also known as the driving gear; 4. S (Sport) for sport mode; 5. L (Low) for low gear.

16

4

Share

What Causes Engine Shaking During the Break-in Period of a New Car?

During the break-in period of a new car, engine shaking can be caused by several factors: incorrect installation of the engine's rubber mounts, leading to distortion; excessive carbon buildup on the spark plugs, resulting in engine vibration; or the accumulation of deposits in the fuel system. Additionally, failure to perform timely maintenance, such as oil changes, during the break-in period can contribute to this issue. Extended Information: Solutions for Engine Shaking: 1. Clean Carbon Deposits Promptly: If the throttle body or fuel injectors are malfunctioning—such as a dirty throttle body or excessive carbon buildup on the injectors—gasoline may be absorbed by the deposits, making the vehicle hard to start. Regular cleaning of carbon deposits is essential to avoid unnecessary wear. 2. Inspect the Condition of Spark Plugs: Faulty spark plugs can disrupt the ignition system. Check for excessive carbon buildup and replace them if necessary. 3. Verify Fuel Pressure: Unstable fuel pump pressure can also cause engine shaking. Inspect the fuel pressure and replace any faulty components promptly.

5

4

Share

What Vehicles Are Suitable for 15W-40 Engine Oil?

15W-40 engine oil with a viscosity of 40 is more suitable for European and German cars, but only if the ambient temperature is not too low. Below is more information about 15W-40 engine oil: 1. For 15W-40 engine oil, the number before the W represents the oil's fluidity. The smaller the number, the better the fluidity, and it also indicates the lowest temperature at which the oil can be used. For example, 15W means the oil can be used at temperatures above -20°C; W stands for Winter. 2. The number after the W represents the oil's viscosity. The larger the number, the higher the viscosity, the better the high-temperature protection performance, and the greater the resistance. Therefore, higher viscosity does not always mean better. Below is more information about engine oil viscosity: 1. Higher viscosity oil provides better sealing but consumes more fuel. 2. At idle, higher viscosity oil results in lower noise. 3. While driving, higher viscosity oil produces higher noise. 4. Lower viscosity oil saves fuel.

4

3

Share

What brand is the jl473zq2 engine?

What are the production capacities of BYD DMi?

Why Did Mercedes-Benz Discontinue Run-Flat Tires?

How to Properly Use the Clutch for Beginners?

How to Control Speed When Driving an Automatic Car?

What Causes Engine Shaking During the Break-in Period of a New Car?

What Vehicles Are Suitable for 15W-40 Engine Oil?

What does Volvo Asia Pacific mean?

Why is it generally not recommended to modify high beams to LED?

Do I Need to Pay the Safety Officer for the Driving Test (Subject Three)?

What Causes a Car Horn to Sometimes Work and Sometimes Not?