What brand is the Jeep car?

What is the method to unclog a sunroof drain pipe?

Here are the methods to unclog a sunroof drain pipe: Syringe Injection Method: Use a syringe connected to an infusion tube. First, extract the accumulated water from the drainage channel to avoid backflow when injecting forcefully. After removing the water, fill the syringe with clean water, align the outlet of the infusion tube with the entrance of the drain pipe, and control the pressure based on the resistance encountered during injection. Once water overflows, use the syringe to suction out the dirty water mixture. Repeat this process several times to unclog the drain pipe. Air Gun Blowing Method: Utilize high-pressure airflow to clear the drain pipe. When unclogging, wrap a piece of cloth around the nozzle to prevent splashing dirty water from staining clothes or the vehicle. Avoid setting the air pressure too high, as this may cause the rubber connector and drain pipe to detach, leading to more severe leakage issues. After blowing, pour clean water into the entrance of the drain pipe and check if water flows out from the outlet near the tire mudguard. If water is observed, it indicates successful unclogging.

2

5

Share

Is the Geely Boyue Equipped with a Three-Cylinder Engine?

Geely Boyue is available with both three-cylinder and four-cylinder engines. Taking the Boyue 2021 Million Edition 1.8TD Manual Two-Wheel Drive Standard as an example: its engine is a four-cylinder with turbocharged intake, delivering a maximum horsepower of 163 HP, a maximum power of 120 kW at 5,500 rpm, and a maximum torque of 250 Nm between 1,500 rpm and 4,500 rpm. The Boyue 2021 Million Edition 1.8TD Manual Two-Wheel Drive Standard is a compact SUV with exterior dimensions of 4,519 mm in length, 1,831 mm in width, and 1,694 mm in height, a wheelbase of 2,670 mm, a fuel tank capacity of 58 liters, and a curb weight of 1,575 kg.

10

3

Share

What are the body dimensions of the Geely Boyue?

Geely Boyue has body dimensions of 4519mm in length, 1831mm in width, and 1694mm in height, with a wheelbase of 2670mm. The fuel tank capacity is 58 liters, and the curb weight is 1575 kilograms. The front suspension type is MacPherson independent suspension, and the rear suspension type is multi-link independent suspension. The Geely Boyue is equipped with a 1.8T 184 horsepower L4 turbocharged engine paired with a 7-speed dual-clutch transmission. It has a maximum power of 135 kW, reaching maximum power at 5500 rpm, and a maximum torque of 300 N·m, available between 1750 rpm and 4000 rpm. The top speed is 200 km/h.

15

1

Share

How to Manually Reset the Maintenance Light on Geely Borui?

Geely Borui maintenance light manual reset method: 1. With the car turned off, press and hold the trip odometer reset button located below the tachometer; 2. Turn the ignition switch to the ON position, then release the trip odometer reset button—the display will show a SERVICE indicator; 3. Pull out the minute button on the clock and turn it to the right—the display will show the mileage; 4. Turn off the engine; 5. Turn the ignition switch to the ON position again, and the SERVICE indicator should disappear. If manual reset fails, visit a repair facility to reset the maintenance light using professional diagnostic equipment.

15

5

Share

What type of oil does the Hyundai Elantra use?

Hyundai Elantra uses 5W-30 semi-synthetic or higher grade engine oil. The 'W' stands for WINTER, and the number before 'W' indicates the oil's flow performance at low temperatures—the smaller the number, the better the starting performance in cold conditions. The Hyundai Elantra is a compact sedan under Beijing Hyundai, equipped with a 1.5L naturally aspirated engine producing a maximum horsepower of 115 hp, paired with a 6-speed manual transmission. The dimensions of the Hyundai Elantra are 4610mm in length, 1800mm in width, and 1450mm in height, with a wheelbase of 2700mm. Its top speed is 190 kilometers per hour.

20

5

Share

How to Reset the Maintenance Light on Geely Borui?

Method to reset the maintenance light on Geely Borui: 1. Press and hold the small trip reset button; 2. Insert the car key and turn it to the position where the dashboard lights up, then release the button, and the maintenance light will turn off; 3. There is a button on the dashboard used to adjust the trip. Press and hold this button for 2 to 3 seconds while the engine is idling. The Geely Borui has a body length, width, and height of 4956mm, 1861mm, and 1513mm respectively, with a wheelbase of 2850mm. It is equipped with two four-cylinder engines: a 2.4L and a 1.8T. The 1.8T engine has a maximum power output of 184 horsepower, while the 2.4L engine delivers a maximum power of 162 horsepower. The transmission system is paired with a 6-speed automatic transmission.

9

2

Share

What brand is the Jeep car?

What is the method to unclog a sunroof drain pipe?

Is the Geely Boyue Equipped with a Three-Cylinder Engine?

What are the body dimensions of the Geely Boyue?

How to Manually Reset the Maintenance Light on Geely Borui?

What type of oil does the Hyundai Elantra use?

How to Reset the Maintenance Light on Geely Borui?

How to Replace the Wiper Blades on a Geely Boyue?

What is the appropriate tire pressure for the Geely Boyue?

Is the Geely Boyue equipped with a wet or dry dual-clutch transmission?

How often should the Geely Boyue be serviced?