What brand is the je4d25q6a engine?

1 Answers
Rivera
07/29/25 5:27pm
je4d25q6a engine is produced by Jiangxi Isuzu Automobile Co., Ltd. located in Nanchang, belonging to a domestically manufactured engine. The 2.5T version of Changan Kaicheng F70 is equipped with the je4d25q6a engine, which has a maximum power of 110kW, a maximum torque of 360 Nm, and a maximum horsepower of 150. For daily maintenance of the je4d25q6a engine, the following methods can be used: Use lubricating oil of appropriate quality grade. For gasoline engines, SD--SF grade gasoline engine oil should be selected based on the additional devices of the intake and exhaust systems and usage conditions; for diesel engines, CB--CD grade diesel engine oil should be selected according to mechanical load, with the selection standard not lower than the requirements specified by the manufacturer; Regularly change the oil and filter. The quality of any grade of lubricating oil will change during use. After a certain mileage, its performance deteriorates, which can cause various problems for the engine. To avoid faults, the oil should be changed regularly according to usage conditions, and the oil quantity should be moderate; When oil passes through the fine pores of the filter, solid particles and viscous substances in the oil accumulate in the filter. If the filter is blocked and the oil cannot pass through the filter element, it will either burst the filter element or open the safety valve, allowing oil to pass through the bypass valve and bring dirt back to the lubrication area, accelerating engine wear and increasing internal contamination; Regularly clean the crankcase. During engine operation, high-pressure unburned gas, acid, moisture, sulfur, and nitrogen oxides from the combustion chamber enter the crankcase through the gap between the piston rings and the cylinder wall, mixing with metal powder generated by part wear to form sludge. A small amount remains suspended in the oil, while a large amount precipitates, blocking the filter and oil holes, making engine lubrication difficult and causing wear; Regularly use radiator cleaner to clean the radiator. Removing rust and scale not only ensures the normal operation of the engine but also extends the overall lifespan of the radiator and the engine.
Was this review help?
8
0
Share
More Forum Discussions

Why Does Europe Accept Three-Cylinder Cars?

Because three-cylinder engines are not only lightweight but also very powerful, and their fuel consumption is much lower than that of four-cylinder or six-cylinder engines. Overview: Three-cylinder cars refer to vehicles equipped with three-cylinder engines, which offer better fuel economy and lower exhaust emissions. Features: The advantages of three-cylinder cars include a lighter and more compact engine. Compared to a four-cylinder engine, a three-cylinder engine has one less cylinder, one less piston, one less connecting rod, one less set of valves, one less spark plug, one less ignition coil, one less fuel injector, one less intake manifold, and one less exhaust manifold. The lighter weight results in better fuel economy and lower exhaust emissions.
11
0
Share

What does A-segment vehicle mean?

A-segment vehicle refers to compact cars, which are common family vehicles. The standards for A-segment vehicles are: 1. Overall body length between 4.2 to 4.6 meters; 2. Wheelbase ranging from 2.4 to 2.7 meters; 3. Engine displacement around 1.6 to 2.0 liters. Examples of A-segment vehicles include: Focus, Octavia, Sagitar, Corolla, Civic, Junjie, Peugeot 307, etc. Taking the Civic 2021 model as an example, its body dimensions are: length 4517mm, width 1799mm, height 1434mm, with a wheelbase of 2700mm, fuel tank capacity of 47 liters, and curb weight of 1343kg.
14
1
Share

Does the 2021 Passat have a particulate filter?

The 2021 Passat is equipped with a particulate filter to meet the China VI emission standards. The particulate filter is a ceramic filter installed in the diesel engine's exhaust system, which captures particulate emissions before they enter the atmosphere. It can reduce the soot produced by diesel engines by more than 90%, and the captured particulate emissions are subsequently burned off during vehicle operation. Diesel engine pollution mainly comes from three aspects—particulate emissions, hydrocarbons (HCx), nitrogen oxides (NOx), and sulfur. Among them, particulate emissions (soot) are mostly composed of tiny particles of carbon or carbide (size less than 4-20μm). How the particulate filter works: The diesel particulate filter is coated with metals such as platinum, rhodium, and palladium. The black smoke containing carbon particles emitted by the diesel engine enters the exhaust particulate filter through a dedicated pipeline. After passing through its densely arranged bag-type filter, the carbon particles are adsorbed on the filter made of metal fiber felt. When the adsorption of particles reaches a certain level, the burner at the end automatically ignites and burns, turning the adsorbed carbon particles into harmless carbon dioxide that is then expelled. To check whether the 2021 Magotan 330 is equipped with a particulate filter, you can use the following three methods: 1. Check the and to see if there is a particulate filter function. Additionally, carefully review the fault codes in the manual to see if there is a "particulate filter" warning light indicator. 2. Check the label on the oil filler cap. If the oil cap clearly indicates 0W-20 grade oil, it means the vehicle is equipped with a particulate filter. 3. Look behind the catalytic converter to see if there is a cylindrical section on the exhaust pipe. If there is, that is the particulate filter.
3
0
Share

What is the fuel consumption of the WEY Tank 300 Urban Edition?

The fuel consumption of the Tank 300 Urban Edition is 9.7L/100km. The currently available models of the Tank 300 Urban Edition include the 2021 Urban Edition 2.0T Must-Have, Urban Edition 2.0T Premium, and Urban Edition 2.0T I-See, totaling three variants. The official NEDC combined fuel consumption is slightly lower than the actual fuel consumption, at 9.7L/100km. Among vehicles in the same class, the Tiguan L has an NEDC combined fuel consumption of 6.6-7.7L/100km, the BMW X1 has 6.1-9.2L/100km, the Tayron has 6.7-7.5L/100km, the Envision has 6.7-7.5L/100km, and the Audi Q3 has 6.7-7.5L/100km. The fuel consumption of a vehicle is directly influenced by five major factors: driving habits, the vehicle itself, road conditions, natural wind, and ambient temperature. Details are as follows: Driving habits: Aggressive driving, such as sudden acceleration, frequent overtaking, and not easing off the throttle before a red light, increases fuel consumption. The vehicle itself: Vehicles with larger displacements generally consume more fuel than those with smaller displacements because larger displacements usually mean higher power output, requiring more gasoline for combustion. Heavier vehicles also have higher fuel consumption due to the greater driving torque needed. Road conditions: Driving on dirt roads, muddy roads, soft surfaces, or mountainous roads increases resistance and fuel consumption. Natural wind: Driving against the wind or on windy days increases vehicle resistance and fuel consumption. Low ambient temperatures: When the engine block is cold, the injected gasoline does not atomize easily during cold starts, requiring more gasoline for combustion, which increases fuel consumption. Additionally, the engine control unit will command higher idle speeds to warm up the engine in cold temperatures, further increasing fuel consumption.
9
4
Share

Can 15w40 engine oil be used in summer?

15w40 engine oil can be used in summer. Here are specific methods for selecting engine oil for cars: Performance selection: If you prioritize long-lasting performance of engine oil, you can choose Mobil engine oil; if you focus on the cleaning effect of engine oil on the engine, you can use Shell lubricants; if you need lubricants with strong oil film toughness, it is recommended to use Castrol. Driving conditions: For frequent driving in congested areas, older vehicles, or long-distance heavy-load transportation, the viscosity of the lubricant can be appropriately increased. Engine type: For naturally aspirated engines, mineral oil and semi-synthetic oil can be used. Compared to naturally aspirated engines, turbocharged engines have a more compact structure and operate under harsher conditions, requiring higher-grade lubricants with better fluidity, preferably fully synthetic oil.
19
0
Share

What are the differences between halogen and xenon headlights?

The differences between halogen and xenon headlights are: 1. Different light intensity: Halogen headlights output 1200 lumens; xenon headlights output 4500 lumens. 2. Different durability: The service life of halogen headlights is 500 hours; the service life of xenon headlights is up to 30,000 hours or more. 3. Different lighting effects: Halogen headlights provide uniform light; xenon headlights have relatively concentrated light with darker sides. 4. Different illumination distances: Halogen headlights have an illumination distance of 4.4 meters; xenon headlights have an illumination distance of 5.2 meters. The working principle of halogen headlights is: Halogen gas such as iodine or bromine is injected into the bulb, and the tungsten filament sublimated at high temperature chemically reacts with the halogen. The cooled tungsten will re-solidify on the tungsten filament, forming a balanced cycle to prevent premature breakage of the tungsten filament.
7
4
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.