What brand is the Highlander's transmission?

Do You Need to Start the Engine When Replacing Coolant?

Replacing coolant does not require starting the engine. Once the engine is running, the coolant circulates, creating pressure in the coolant lines. If coolant is replaced at this time, the pressure can cause it to spray out from the nozzle, leaving the car without proper cooling protection and potentially damaging the engine. Steps for replacing coolant: Before completely replacing the coolant, conduct a thorough inspection to check for any leaks or cracks in the pipes, with a particular focus on the five-way hose. The five-way hose gets its name from having five connections to different parts of the car. Coolant flows through this hose and is distributed to various parts of the vehicle to perform its function. If there are signs of coolant leakage in this area, replace the hose or reseal the connections as needed. Drain the old coolant, then flush the system with clean water. Add water to the coolant reservoir and continue filling until water flows continuously through the engine cooling system. Start the engine and let it idle for 3 to 5 minutes to circulate the water. Initially, the water draining from the reservoir may appear slightly pink. Continue flushing until clean water flows out. Remember to disconnect the heater hose to drain the water from the heater core. After about an hour of draining, add new coolant through the radiator hose to allow it to flow quickly into the radiator. Then, fill the coolant reservoir with another bottle of coolant until it is nearly full. Start the engine and let it run for about 10 minutes. As air is purged from the cooling system, the coolant level will drop. Top it off until it reaches the "MAXT" mark on the reservoir.

11

0

Share

How to Check Traffic Violations with Temporary License Plates?

You can bring your ID card, driver's license, and the vehicle's registration certificate to the traffic violation processing hall or window of the traffic management department to inquire and handle the matter. Search online for the "Comprehensive Traffic Safety Service Platform," click on the information query in the menu bar, and enter the vehicle plate type, plate number, and the last six digits of the engine number to check.

5

3

Share

What is the correct method for making a U-turn with a vehicle?

Fasten your seatbelt, adjust the seat and rearview mirrors, and maintain the most comfortable driving posture. Check the left rearview mirror to determine if there are any vehicles approaching from behind. Begin driving only after confirming it is safe. Turn on the left turn signal and turn the steering wheel all the way to the left. Then lightly press the accelerator, ensuring the speed is not too fast. When the front of the car is about to straighten out, return the steering wheel to the center position to ensure the car is aligned straight. Press the accelerator and resume normal driving.

7

5

Share

How to Handle a Minor Rear-End Collision?

Please note, do not let the other party leave easily. Have them contact their insurance company to ask if they need to inspect the scene. Then, take the other driver directly to the repair shop to have their insurance company assess the damage and issue an assessment report. If the other party does not go to the repair shop together and pay, be sure to record their detailed information and verify its authenticity. Then, the initiative is in your hands, and the handling process can refer to the other party being fully at fault.

8

5

Share

What to Do When the Trunk Lock Won't Open?

Most car models have a small slot inside the trunk. You can use a key or other sharp object to pry open the outer cover. If you frequently use the key to open the trunk lid, it may be due to a broken linkage rod, and you should go to a repair shop to get it fixed. If the trunk itself is malfunctioning, it needs to be repaired at a repair shop or a 4S store. If you haven't used the remote key to unlock the trunk, it will naturally be very difficult to open. Unlock it first, and then you can open it.

19

0

Share

When Should the Car Fuel Filter Be Replaced?

The external fuel filter should generally be replaced every 20,000 to 30,000 kilometers. The internal fuel filter should generally be replaced every 50,000 to 70,000 kilometers. Below are detailed explanations about external and internal fuel filters: 1. External fuel filter: The external fuel filter is located outside the fuel tank, making its replacement relatively simple. Therefore, the external fuel filter can be replaced more frequently. It is important to note that the arrow on the filter housing should point toward the front of the car. 2. Internal fuel filter: The internal fuel filter is located inside the fuel tank, making its replacement more complex and difficult. The internal fuel filter integrates the fuel pump, fuel level sensor, and pressure valve. Mistakes during the replacement process may damage the pump housing. Therefore, the internal fuel filter should not be replaced frequently.

16

1

Share

What brand is the Highlander's transmission?

Do You Need to Start the Engine When Replacing Coolant?

How to Check Traffic Violations with Temporary License Plates?

What is the correct method for making a U-turn with a vehicle?

How to Handle a Minor Rear-End Collision?

What to Do When the Trunk Lock Won't Open?

When Should the Car Fuel Filter Be Replaced?

What to Do When a Car Tire Loses Air

What is the correct gear for auto start-stop at traffic lights?

What to Do If You Drive Without Carrying Your Driver's License?

What to Do If Your Vehicle Exceeds the Annual Inspection Date?