What brand is the Haval transmission?

How to correctly install an electronic ETC?

The correct process for installing an electronic ETC is as follows: Purchase the ETC device, check if all components are complete, and review the installation manual. Determine the installation direction of the ETC device, with the solar panel facing outward. Peel off the adhesive backing of the device, align the solar panel with the vehicle's front windshield, and press firmly to ensure secure attachment. It is best to install the device at the top center of the vehicle's front windshield, ensuring it does not obstruct the driver's normal view. Once attached, it should not be removed and reattached. Finally, insert the ETC card to activate the device. Upon hearing a beep and seeing the indicator light, the device is activated. Here are some precautions for ETC installation: Avoid obstructing the driver's view. The best location is behind the rearview mirror: Many car models have windshields with a steep angle, which can reduce the driver's field of vision. Installing the ETC without considering this can increase blind spots. Installing it behind the rearview mirror on the right side helps avoid blocking the view. Do not interfere with charging: The ETC electronic tag consumes power but generally does not require charging or battery replacement, as it has a built-in solar panel for self-charging. Therefore, avoid installing it on blacked-out areas of the windshield or positions that might block the solar panel. Do not remove the device once installed: The adhesive has an anti-tamper button connected to a switch. When installed, the windshield presses this button in. If removed, the button pops out, triggering the switch and locking the device, requiring an ETC service point to unlock it. This prevents multiple vehicles from sharing one device. ETC usage notes: The ETC transaction sensing range is 8 meters. To avoid issues caused by a malfunctioning ETC device in the vehicle ahead, maintain a distance of at least 10 meters to prevent automatic payment for the wrong vehicle. The ETC lane recognition speed is 20 km/h; exceeding this speed may result in failed transactions. If using a debit card linked to ETC, insufficient balance can also cause payment failures.

12

2

Share

What are the differences between the Beidouxing and Beidouxing X5 engines?

The following are the relevant differences between the Beidouxing and Beidouxing X5 engines: 1. Price: The official price of the top-end Beidouxing is cheaper than that of the top-end Beidouxing X5. 2. Overall body: The body of the top-end Beidouxing is shorter than that of the top-end Beidouxing X5, and the wheelbase of the top-end Beidouxing is also shorter than that of the top-end Beidouxing X5. 3. Overall configuration: The top-end Beidouxing X5 and the top-end Beidouxing are comparable. 4. Power output: The top-end Beidouxing and the top-end Beidouxing X5 are the same. 5. Body dimensions: The latest top-end Beidouxing has a body length, width, and height of 3400(mm) x 1575(mm) x 1705(mm), with a wheelbase of 2335(mm). The latest top-end Beidouxing X5 has a body length, width, and height of 3664(mm) x 1610(mm) x 1722(mm), with a wheelbase of 2485(mm). Overall, the body of the top-end Beidouxing is shorter than that of the top-end Beidouxing X5, and the wheelbase of the top-end Beidouxing is also shorter than that of the top-end Beidouxing X5.

17

4

Share

Can ETC be installed without mounting it on the windshield?

ETC can be used without being stuck to the windshield. Installing ETC on the upper part of the windshield is to minimize obstruction of the driver's view and to ensure better recognition by the equipment at highway toll stations. If you don't want to install it on the windshield, try to place it in an open position where it can be seen through the windshield. For small cars, the ETC installation position is generally in the upper middle part of the front windshield, while for large vehicles like trucks and buses, the installation position is in the lower middle part. The appropriate installation position should be no lower than 1.2 meters and no higher than 2.5 meters, with an installation angle between 30 to 90 degrees. For vehicles with factory-installed or aftermarket explosion-proof film, which may affect the signal transmission of the microwave communication link, the ETC should be installed in the microwave window strip. Here are the precautions for installing ETC: Do not block the view; it's best to install it behind the rearview mirror: Many car models have windshields with a large rearward tilt, which reduces the driver's field of vision. If ETC is installed without considering this, it can increase the driver's blind spots. Installing it behind the rearview mirror on the right side can help avoid obstructing the view. Do not interfere with charging: The ETC electronic tag consumes power but generally does not require charging or battery replacement because it has a solar panel on the back that can charge itself. Therefore, during installation, avoid the blackened areas on the windshield and positions that may block the solar panel. Do not remove it arbitrarily once installed: The button in the middle of the adhesive is an anti-removal lever connected to a switch. After the electronic tag is installed, the windshield will press the anti-removal lever in. If the tag is removed arbitrarily, the lever will pop out and trigger the switch, locking the electronic tag and rendering it unusable. You will then need to visit an ETC service point to unlock it. This is designed to prevent multiple vehicles from sharing one device. When using ETC, note the following: The ETC transaction sensing range is 8 meters. To prevent issues caused by the ETC device of the vehicle in front malfunctioning, maintain a distance of more than 10 meters from the vehicle ahead to avoid automatic payment for the preceding vehicle. The ETC lane recognition speed is 20 kilometers per hour; driving too fast may result in failure to read the vehicle's device information and failed deductions. When using a debit card linked to ETC, insufficient balance may also cause deduction failures.

7

3

Share

What does the tire size 120/70-12 mean?

The tire size 120/70-12 indicates: 120 represents the tire section width in millimeters; 70 is the aspect ratio, which is the ratio of the tire sidewall height to the tire section width, with 70 representing 70%. Generally, tire aspect ratios range between 30% and 80%; 12 is the rim diameter in inches. In addition to the size, tires are marked with the following common data: Tire cord material: Represented by Chinese pinyin, such as M for cotton cord, R for rayon cord, N for nylon cord, G for steel cord, ZG for steel radial cord tires. Speed rating: Indicates the maximum speed a tire can carry a specified load under specified conditions. Letters A to Z represent certified speed ratings from 4.8 km/h to 300 km/h. Common speed ratings include: Q: 160 km/h; H: 210 km/h; V: 240 km/h; W: 270 km/h; Y: 300 km/h. Rim specification: Indicates the rim size compatible with the tire for practical use. Related information Tire lifespan: The wear life of a tire is between 30,000 to 50,000 kilometers. If the tire has not reached the wear limit or mileage but has been in use for 5 years or has developed significant cracks on the sidewalls, it should be replaced. Tire material: The main component of a tire is rubber. The maximum storage and anti-aging time for rubber, from natural latex to EPDM and nitrile, does not exceed 10 years. The average lifespan of various rubber products in use is 3-5 years.

18

4

Share

Does Banana Oil Damage Car Paint?

Banana oil damages car paint. Because banana oil is an extremely strong solvent, it can quickly dissolve organic substances, including paint, making it easy to wipe or wash off. Banana oil, also known as thinner, has a chemical composition of isoamyl acetate. Banana oil is highly volatile, flammable, explosive, and toxic, making it a hazardous material. Pure banana oil is a colorless, transparent liquid, slightly soluble in water but soluble in various organic solvents, primarily used as a solvent and thinner for spray paint. Below are some methods for protecting car paint: 1. Waxing: Waxing can be done directly or after polishing. Direct waxing involves cleaning the car body and applying wax directly to the clear coat layer on the surface of the paint, while polishing waxing requires using a polishing machine to polish the paint surface before applying wax. This method can instantly make the car shine. 2. Glazing: Due to the composition of the glaze, it is not resistant to acidic or alkaline cleaning and can be easily damaged. It typically lasts only 1 to 3 months, and glazing can harm the car paint, requiring reapplication every two to three months. 3. Crystal Coating: Crystal coating is a hard protective layer specifically designed for car paint, seats, interior and exterior trim, glass, tires, and other key areas. It comes in quick-drying and slow-drying types, mainly determined by its main components. 4. Film Application: Car coating is a highly protective measure that can brighten the paint surface while also providing multiple benefits such as resistance to acids and alkalis, high temperatures, strong waterproofing, oxidation resistance, and UV protection.

10

4

Share

What is the wading depth of a sedan?

The maximum wading depth for a typical sedan is 200-300mm. The wading depth of a sedan is determined by the height of the vehicle's chassis, which is the ground clearance listed in the vehicle's parameter configuration table. Generally, the greater the ground clearance, the higher the chassis, and the higher the safety factor when driving through waterlogged roads. Therefore, in terms of safe wading depth, off-road vehicles and SUVs have obvious advantages. However, for most compact and small cars with low chassis, the position of the vehicle's air intake should be used as a reference when passing through waterlogged roads. If the air intake is below the water level when a sedan is wading, water will be sucked into the engine's cylinders. Since water cannot be compressed like air, it can cause severe damage to the engine's mechanical components (such as connecting rods, pistons, crankshafts, etc.). Therefore, the wading depth should not exceed the height of the engine's air intake. The height of the air intake, and thus the maximum wading depth, can be increased by installing a snorkel. If wading is unavoidable, the following safe and correct operations should be performed: Before wading, always turn off the auto start-stop function to prevent the vehicle from automatically restarting after stalling in water, which could cause severe engine damage due to water intake. Judge the underwater road conditions based on the passage of vehicles ahead and choose an appropriate entry point. Observe the path taken by other vehicles and follow their tracks at low speed, avoiding sudden acceleration or deceleration. On roads prone to water accumulation, observe warning water level markers, trees, or other reference objects like the wheels and doors of other vehicles to estimate the water depth before deciding whether to proceed. Know your vehicle's safe wading depth. If the water depth exceeds half the tire height or the engine's air intake, do not proceed and choose an alternative route instead.

11

4

Share

What brand is the Haval transmission?

How to correctly install an electronic ETC?

What are the differences between the Beidouxing and Beidouxing X5 engines?

Can ETC be installed without mounting it on the windshield?

What does the tire size 120/70-12 mean?

Does Banana Oil Damage Car Paint?

What is the wading depth of a sedan?

What are the penalties for motorcycle license plate cloning in 2021?

What is the actual fuel consumption of the BMW 5 Series 525li?

Why does a tire leak air without a puncture?

How often should the spark plugs of Qashqai be replaced?