What brand is the Haoqing car?

1 Answers
StChloe
07/24/25 6:56pm
Haoqing is a car under Geely. Below are some related introductions about Geely Haoqing: 1. Model Introduction: According to official information from Geely, Geely officially launched a new 7-seater SUV, named "Geely Haoqing," and announced the detailed parameter configurations of the vehicle. It is reported that the Geely Haoqing continues the exterior design of the Emgrand GX9, with adjustments made to specific dimensions, and adopts a new interior and a 2+3+2 seating layout. Additionally, the new car will initially only launch a total of 5 models equipped with a 2.4L engine, offering both front-wheel drive and four-wheel drive versions. However, a 1.8T model will be introduced later. 2. Model Highlights: From market reactions, the appearance of the Geely Haoqing is quite controversial, but its space advantage is prominent, and its rich configurations are also standout highlights. In particular, its 7-seater version has been favored by many consumers. The 7-seater version of the Geely Haoqing SUV is not simply a 5-seater with two additional seats. Instead, it is designed with the concept of a 7-seater SUV, achieving a luxurious and comfortable level in terms of size, configuration, and other aspects. This is the first truly meaningful 7-seater SUV model from a domestic brand.
Was this review help?
20
0
Share
More Forum Discussions

What does a Class II vehicle mean?

A Class II vehicle refers to a passenger bus with 8 to 19 seats or a truck with a load capacity of over 2 tons up to 5 tons. The evaluation criteria for Class I and Class II vehicles are as follows: 1. Class I vehicle: The vehicle must be less than 7 years old; key graded items must meet Class I standards, and non-graded key items must be qualified; the pass rate for items must be 90% or higher; there must be no operational restrictions. Evaluation criteria: The vehicle must have good technical performance, with all major technical indicators meeting specified requirements; the vehicle's mileage must be within two-thirds of the specified major overhaul interval; the vehicle must be in good condition and ready for immediate use in transportation. 2. Class II vehicle: The vehicle must be over 7 years old; key graded items must meet Class II or higher standards, and non-graded key items must be qualified; the pass rate for items must be 80% or higher; there must be no operational restrictions. Evaluation criteria: The main evaluation focuses on the vehicle's power performance, fuel economy, braking performance, steering and handling, headlights and horn noise, exhaust emissions, rain and sealing performance, and overall appearance. The vehicle's age is determined from the date it was first put into operation.
7
5
Share

What Causes Water Leakage in Front of the Passenger Seat?

It may be caused by door leakage or improper adhesion of the door waterproof membrane. The specific solutions are as follows: Sunroof Drain Hole Clogged: The initial clogging of the sunroof drain hole occurs at the entrance of the drain hole, which can be seen by opening the sunroof. At this point, it can be cleaned. Water Accumulation Inside the Door: When opening or closing the door, or while driving, a noticeable sound of water can be heard. This is caused by water sloshing inside the door. Use a thin wire or small screwdriver to unclog the drain hole. Air Conditioner Drain Hole: When the air conditioner is on, observe where water is dripping continuously. The air conditioner drain hole is located there. If it becomes clogged, the water from the air conditioner cannot drain and will flow back into the cabin, usually first noticed on the floor of the passenger seat. This should be addressed promptly to prevent the carpet from getting wet and developing mold.
2
1
Share

What are the parameters of the Camry?

Body dimensions: 4885×1840×1455mm. More details about the Camry are as follows: 1. Exterior: The eighth-generation Camry features dual styling designs—Luxury and Sport—both derived from Toyota's latest "Keen Look" design language. The Luxury version adopts a large trapezoidal horizontal grille, with a streamlined body posture, lower waistline, and an extended roof rear section to increase rear headroom. The Sport version features a three-layer grille front face, debuting a two-tone body and "all-black" cabin design, with a dual-sided quad-exhaust pipe layout at the rear. Additionally, the hybrid version is based on the Luxury model, highlighted by light blue front and rear lamps. 2. Interior: The interior adopts an asymmetrical design with a Y-shaped curve on the center console. Soft-touch surfaces and metal trim panels use premium materials, and the instrument panel and console trim feature Toyota's first-time use of the Three Overlay Method (TOM) surface decoration process, creating a visually three-dimensional effect. The eighth-generation Camry's new seats sport a dynamic, sporty design, using new springs and high-density, high-damping polyurethane foam cushions.
14
2
Share

What is the simplest method for parallel parking with an automatic transmission?

Learning the correct method for parallel parking with an automatic transmission can make it simple to park. Below are the specific steps for parallel parking with an automatic transmission: 1. Find the right spot: Do not wait until you reach the parking spot to make adjustments. Prepare in advance by reducing speed, checking the right rearview mirror for traffic behind you, and confirming it is safe before moving the vehicle to the right side. From the driver's perspective, when about one-third of the front of the car aligns with the edge line of the right lane, you can stop. 2. Right rearview mirror: Use the right rearview mirror to observe the distance between the vehicle and the curb, especially when parallel parking, to avoid scraping or squeezing the tires against the curb, which can cause significant damage. Additionally, when the right door handle overlaps or just touches the curb line, the distance is usually within 30 cm. 3. Left rearview mirror: Check the left rearview mirror to ensure the left door handle does not extend beyond the body of the car behind you. However, if the car behind is parked improperly, this observation may be ineffective. Therefore, after parking, check the traffic situation on the left rear side, confirm it is safe, and then exit the vehicle to walk around and inspect the distance.
13
1
Share

What to Do About Squeaking Noises from the Car Roof?

There are many reasons for squeaking noises from the car roof lining. If the noise is caused by loose wiring inside the roof lining, removing the lining and adding soundproofing pads should suffice. If the issue is due to large gaps, applying adhesive or replacing the roof lining is recommended. Here are the details: 1. Possible Causes: The car roof is typically secured with clips. If there's a noise, try pushing upwards evenly on the interior roof (avoid excessive force). It could also be due to foreign objects trapped in the roof's interlayer. 2. Other Causes: Squeaking noises from the roof lining might also result from the failure of lubricants on the sliding rails and seals of a panoramic sunroof due to temperature, humidity, or dirt. Lack of lubrication in the rails can lead to squeaking, poor movement, improper sealing, or even jamming and motor burnout over time. Therefore, these areas need to be relubricated, and the front glass panel rails should be cleaned and lubricated. 3. 4S Shop Inspection: If self-inspection is inconclusive, visit a 4S shop for professional diagnosis. Based on the findings, promptly address, repair, or secure any faulty, missing, incorrectly installed, or loose components to eliminate safety hazards.
19
1
Share

How to Use the Internet of Vehicles in Roewe i5?

Usage method of Roewe i5 Internet of Vehicles: 1. Connect the mobile phone and the car with a data cable. It is important to note that the USB port on the left side of the central control area must be used; 2. Enter the developer mode on the mobile phone, then turn on Bluetooth data packet logs, enable developer options, and click USB debugging. When prompted on the mobile phone whether to allow, click allow; 3. Return to the developer mode, enable USB debugging, and then click USB installation. At this time, the central control screen will display the interface for installing Saiclink; 4. After the mobile phone downloads, a pairing interface will appear. Click to pair, and there will be a disclaimer. Click agree; 5. After successful pairing, the Saiclink logo on the car's central control screen will light up, and the mobile phone and car can be interconnected. The Roewe i5 is a high-energy Internet intermediate car under the Roewe brand. The car has a length, width, and height of 4601mm, 1818mm, and 1489mm respectively, with a wheelbase of 2680mm. The Roewe i5 series is equipped with a 1.5L DVVT high-performance engine, matched with a CVT high-energy continuously variable transmission.
15
1
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.