What brand is the engine of the Trumpchi GS4?

1 Answers
VonEmmett
07/29/25 7:20pm
GAC Trumpchi's GS4 engine is independently developed, with the engine model being 4A15M1. Below is additional information about the GAC Trumpchi GS4: Introduction to the Trumpchi GS4: The new-generation Trumpchi GS4 is positioned as a compact SUV. The vehicle adopts the Lingyun Wing 3.0 design language, with the front grille integrated with the headlights, making the car look more imposing and distinctive. Configuration of the Trumpchi GS4: The GAC Trumpchi GS4 is equipped with two turbocharged engines: a 1.3T and a 1.5T, paired with a 7-speed dual-clutch transmission, a 6-speed automatic manual transmission, and a 6-speed manual transmission. In terms of the suspension system, the new vehicle is equipped with front MacPherson and rear multi-link independent suspensions.
Was this review help?
16
3
Share
More Forum Discussions

Where is the anti-theft control box located in the Buick Excelle?

Buick Excelle's anti-theft control box is located at the lower left corner of the steering wheel, and the key induction coil on the steering column is the anti-theft module. Purpose of installing the anti-theft device: The main purpose of installing the anti-theft central locking system is to control the vehicle's original central locking, achieving the goal of remote lock/unlock operation. Function of the anti-theft device: The vehicle anti-theft control system integrates the anti-theft device with power windows and central door lock control modules for centralized monitoring. When pressing the lock button on the remote control, the central door lock system engages. When the system enters alarm status, the door windows will automatically rise to prevent users from forgetting to close them, eliminating concerns about rain, wind, or theft, thus providing convenience for users.
11
3
Share

Does a Small Gear Driving a Large Gear Speed Up or Slow Down?

A small gear driving a large gear results in a reduction in speed. When a small gear drives a large gear, the rotational speed decreases, which is based on the principle of gear ratio. When two gears of different diameters mesh and rotate together, the larger diameter gear naturally turns slower than the smaller one. The speed ratio is inversely proportional to the gear diameters. Below are the specific functions of gear engagement: 1. Changing speed or torque: There are many gears in the transmission and drivetrain. The gears in the transmission are used to change speed and torque, while the main reduction gear in the differential reduces speed and increases torque. 2. Power transmission: Gears serve a power transmission function. Many four-wheel-drive vehicles have numerous gears in the transfer case, which facilitate power transmission. The main reduction gear in the differential also aids in power transmission. Many gears transmit power by meshing with each other. Gears in the steering system also contribute to power transmission. 3. Achieving gear ratios: Different gear combinations in the transmission enable various gear ratios, allowing the vehicle to adapt to different driving conditions.
2
3
Share

Is the EA211 spark plug not suitable for double platinum?

EA211 spark plugs cannot use double platinum. Spark plugs, commonly known as sparkers, function by discharging the pulsed high voltage electricity delivered by the high-tension leads, breaking down the air between the two electrodes of the spark plug to generate an electric spark, thereby igniting the air-fuel mixture in the cylinder. The following is an introduction to spark plugs: 1. Main types: The main types include standard spark plugs, projected insulator spark plugs, electrode-type spark plugs, seat-type spark plugs, pole-type spark plugs, and surface-gap spark plugs, among others. 2. Function: The purpose of a spark plug is to introduce tens of thousands of volts of high voltage into the combustion chamber and generate an electric spark to ignite the air-fuel mixture. Working in conjunction with the ignition system and fuel supply system, it enables the engine to perform work, collectively determining the engine's performance to a large extent. The electrodes of the spark plug repeatedly and continuously generate ignition sparks to ignite the air-fuel mixture in the cylinder. Meanwhile, other parts of the ignition system generate timed high-voltage pulses, forming sparks and creating explosions to provide the energy required for the engine's power output.
2
3
Share

What is the tire pressure for a spare tire?

The air pressure of the spare tire should be between 2.3bar and 2.5bar. During driving, if the tire pressure is too high or too low, or if encountering sharp objects, the car tire may experience a blowout. Hazards of low tire pressure: Increased friction coefficient with the road surface, leading to higher fuel consumption; Causes the steering wheel to become heavy and prone to deviation, which are factors detrimental to driving safety; Increases the movement of various parts of the tire, causing abnormal heating due to excessive rolling; Reduces the functionality of the cord and rubber, leading to delamination or cord breakage, and excessive friction with the rim causing damage and abnormal wear at the bead area; Multiplies the friction between the tire and the ground, sharply raising the tire temperature, softening the tire, and drastically reducing its strength. High-speed driving may result in a blowout; Increases tire body deformation, making the tire side prone to cracks, while generating flexing motion, leading to excessive heat, accelerating rubber aging, cord fatigue, and breakage, and enlarging the tire's contact area with the ground, accelerating shoulder wear. Hazards of high tire pressure: Reduces the tire's friction and adhesion, affecting braking performance; Causes steering wheel vibration and deviation, reducing driving comfort; Accelerates wear on the central tread pattern of the tire, shortening its lifespan; Increases vehicle body vibration, indirectly affecting the lifespan of other components; Overextends the tire cords, reducing the tire body's elasticity and increasing the load on the car during driving; Decreases puncture resistance. When encountering sharp objects like nails or glass on the road, they can easily penetrate the tire, causing internal cracks and blowouts due to impact.
12
4
Share

Can Chassis Armor Reduce Noise?

Chassis armor not only reduces noise but also provides functions such as corrosion prevention, stone impact protection, vibration reduction, and fuel savings. Below is an introduction to chassis armor: Specific functions of chassis armor: Chassis armor involves covering areas that cannot be sprayed, such as screws, oil pipes, the motion system, and the cooling system. After this treatment, the chassis effectively seals panel gaps, reducing interior noise and integrating the chassis into a single unit. This significantly decreases resonance-generated noise during driving. When a car travels on rough roads, sand and gravel kicked up by vibrations continuously collide with the chassis and wheel rims. Chassis armor protects the original anti-corrosion paint and hot-dip galvanized layer of the chassis, preventing exposed metal from coming into contact with moisture and haze in the air, which can cause rust. It also strongly resists the rapid spread of rust, which can corrode internal shell components. Other functions of chassis armor: Prevents chassis corrosion; protects against stone impacts during driving; reduces vibrations from wheels, engines, and other components; provides heat insulation and fuel savings in summer; lowers vehicle maintenance costs, extends vehicle lifespan, and preserves car value.
12
0
Share

What is the compensation standard for wrong fuel refueling at gas stations?

If the gas station's negligence leads to wrong fuel refueling, the gas station should theoretically be responsible for compensating for the losses caused to the vehicle. The losses include the costs of cleaning and replacing vehicle components, as well as operational losses incurred by the vehicle owner. After calculating the relevant losses, a compensation claim can be made to the gas station. Below are the relevant details: 1. Negotiation: If it is the first time that the wrong fuel grade has been added and the vehicle has not been driven after refueling, the issue is not significant. You can negotiate with the gas station and choose to have the fuel pumped out at a repair shop, clean the fuel tank, and then refuel. 2. Impact of wrong fuel refueling: If there was previously some 95-grade fuel left in the tank and 92-grade fuel was mistakenly added, this situation is equivalent to mixing two different grades of fuel. Mixing different grades of gasoline in the short term will not cause significant harm to the vehicle, but long-term mixing of different grades of gasoline will affect the lifespan of the vehicle's ignition system, fuel injectors, and spark plugs.
10
3
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.