What brand is the engine of the Dacheng G60s car?

1 Answers
LeFelicity
07/30/25 9:08am
The engine of the Dacheng G60s is produced in Jiangxi, so this engine is a domestic engine. The engine model of the Dacheng G60s is JT15T, with a maximum power of 120 kW, a maximum torque of 230 Nm, a maximum horsepower of 163 Ps, a maximum power speed of 5500 rpm, and a maximum torque speed range of 1750-4500 rpm. For daily maintenance of the Dacheng G60s engine, the following methods can be used: Use lubricating oil of the appropriate quality grade. For gasoline engines, choose SD--SF grade gasoline engine oil based on the additional devices of the intake and exhaust systems and usage conditions; for diesel engines, choose CB--CD grade diesel engine oil based on mechanical load, with the selection standard not lower than the manufacturer's requirements. Regularly change the oil and filter. The quality of any grade of lubricating oil will change during use. After a certain mileage, performance deteriorates, leading to various engine problems. To avoid faults, change the oil regularly based on usage conditions and maintain an appropriate oil level. When oil passes through the fine pores of the filter, solid particles and viscous substances in the oil accumulate in the filter. If the filter is clogged and oil cannot pass through, it may burst the filter or open the safety valve, allowing oil to bypass through the bypass valve and carry contaminants back to the lubrication area, accelerating engine wear and internal pollution. Regularly clean the crankcase. During engine operation, high-pressure unburned gases, acids, moisture, sulfur, and nitrogen oxides from the combustion chamber enter the crankcase through the gap between the piston rings and cylinder walls, mixing with metal particles from wear to form sludge. Small amounts remain suspended in the oil, while large amounts precipitate, clogging filters and oil passages, making lubrication difficult and causing wear. Regularly use a radiator cleaner to clean the radiator. Removing rust and scale not only ensures normal engine operation but also extends the overall lifespan of the radiator and engine.
Was this review help?
4
3
Share
More Forum Discussions

What engine does the BYD Tang use?

BYD Tang is equipped with the BYD487QA engine. Here are the specific details: 1. The BYD Tang engine, codenamed BYD487ZQA, is a 2.0T engine independently developed by BYD. 2. The entire engine is independently produced with a vertical integration rate of up to 90%. It features exhaust gas turbocharging, an all-aluminum engine, dual variable valve timing, direct fuel injection, dual balance shafts, and an intercooler in the intake manifold. Many core components are supplied by top-tier brand suppliers such as BorgWarner and Bosch. 3. In terms of power parameters, the maximum power is 151 kW, and the maximum horsepower is 205 PS. The torque of this engine is also a highlight, reaching up to 320 N·m, and it can deliver full torque power at just 1750 rpm.
1
2
Share

What is the minimum ground clearance of the MG HS?

The minimum ground clearance of the MG HS is 175mm. Minimum ground clearance refers to the distance between the lowest point of the vehicle (excluding the wheels) and the supporting surface when the car is fully loaded and stationary. It is used to characterize the vehicle's ability to pass over obstacles such as rocks and tree stumps without collision. The MG HS is a compact SUV launched by SAIC Motor, with body dimensions of 4574mm in length, 1876mm in width, and 1664mm in height, and a wheelbase of 2720mm. The MG HS is equipped with 1.5T and 2.0T engines, with maximum power outputs of 169 horsepower and 231 horsepower respectively. The transmissions paired with these engines are a 7-speed dual-clutch and a 6-speed dual-clutch gearbox respectively.
5
4
Share

Where is the oxygen sensor located in the old Passat?

The oxygen sensor in the old Passat is located on the exhaust manifold, with one in front of the catalytic converter and another behind it. The front oxygen sensor detects the oxygen content in the exhaust, sending signals to the ECU, which then adjusts the air-fuel ratio. If the catalytic converter is damaged, a warning light will appear on the dashboard, indicating the need for replacement. The catalytic converter is a crucial component on the exhaust manifold, reducing pollutant levels in the exhaust, which benefits environmental protection. The old Passat is a mid-size car produced by SAIC Volkswagen, with body dimensions of 4870mm in length, 1834mm in width, 1472mm in height, and a wheelbase of 2803mm.
13
1
Share

Where is the cabin air filter located in the Peugeot 508?

The cabin air filter in the Peugeot 508 is located at the bottom of the center console next to the accelerator pedal, and it can be seen after removing the central cover. The cabin air filter is a filter installed in the car's air conditioning system, which can absorb dust particles, alleviate respiratory discomfort, reduce irritation for allergy sufferers, and protect the air conditioning cooling system. The Peugeot 508 has body dimensions of 4826mm in length, 1855mm in width, and 1465mm in height, with a wheelbase of 2815mm. The Peugeot 508 is equipped with either a 1.6T turbocharged engine or a 1.8T turbocharged engine. The 1.6T engine has a maximum power output of 125 kW and a maximum torque of 250 Nm, while the 1.8T engine has a maximum power output of 155 kW and a maximum torque of 300 Nm.
1
3
Share

How to Use Cruise Control in Volkswagen Passat?

Volkswagen Passat cruise control usage is as follows: 1. Speed setting, first slide the button on the cruise control lever to the left to the ON position, then accelerate or control the speed to maintain the desired speed, press the SET button at the top of the lever, at this time release the accelerator pedal, the car will automatically move forward. 2. Safety awareness during cruise control, release the accelerator and place your left foot on the floor, the driver should ensure that they can accurately step on the brake at any time, once there is a potential danger, the foot should be moved to the brake pedal. 3. In case of danger, step on the brake pedal to slow down in time, at this time the cruise control will be automatically deactivated, and the speed will decrease without stepping on the accelerator. Sometimes in dangerous situations, the cruise control can also be deactivated directly by turning off the ON slide button. If you accelerate to avoid danger, the cruise control speed will automatically resume when you stop accelerating. If the acceleration exceeds the original speed by 10KM for more than 5 minutes, the cruise control will also be deactivated.
7
2
Share

How to adjust the fuel consumption display on the 2019 Sagitar?

Method to adjust the fuel consumption display on the 2019 Sagitar: There is a button at the top of the right control lever under the steering wheel (the lever that controls the wipers). Press this button to switch to the fuel consumption display. Each press changes the display, cycling through the following information: instant fuel consumption, average fuel consumption, remaining driving range, current driving time, current driving distance, and current average speed. The Sagitar is a compact family sedan under the Volkswagen brand, with body dimensions of 4753mm in length, 1800mm in width, and 1462mm in height, and a wheelbase of 2731mm. The Sagitar lineup uses two engines: a 1.2L turbocharged engine and a 1.4L turbocharged engine.
5
0
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.