What brand is the engine of the Changan Oushang A800?

3 Answers
KevinLynn
07/28/25 4:11pm
The engine of the Changan Oushang A800 is a Changan independent brand. The Changan Oushang A800 uses two engines in total, one is a 1.5-liter turbocharged engine, and the other is a 1.6-liter naturally aspirated engine. The Changan Oushang A800 is an MPV model under Changan, with a length, width, and height of 4810 mm, 1795 mm, and 1730 mm respectively, and a wheelbase of 2760 mm. The Changan Oushang A800 integrates a fashionable and elegant exterior design, imaginative intelligent configurations, and unique and comfortable respiratory health features. With its breathable, intelligent, spacious, extremely safe, ultra-quiet, strong handling, and high-quality characteristics, it provides passengers with a 'journey of good times all the way.'
Was this review help?
9
5
Share
MacIan
08/11/25 8:28pm
I've been into cars for quite some time. The engine in the Changan Oushang A800 is Changan's self-developed brand, specifically the 1.5T Blue Whale series power unit, delivering around 156 horsepower. It also utilizes turbocharging and direct injection technology to improve fuel efficiency. When driving, the power feels smooth, especially during mid-range acceleration, without the sluggishness you might experience with some small-displacement cars at startup. Noise control is well done, making city driving quite quiet, though wind noise becomes slightly noticeable at high speeds. Fuel economy is also decent, with my real-world testing showing a combined fuel consumption of around 8L/100km, and it runs fine on 92-octane gasoline. Changan has made significant progress in engine technology in recent years, and the Blue Whale series is reliable and durable, offering much better value for money compared to imported brands. Routine maintenance is straightforward, with oil and filter changes keeping it in good condition, making it well-suited for family car needs.
Was this review help?
3
5
Share
Expand All
LaAdrian
09/29/25 6:38am
I've been using the Changan Oushang A800 for two years now. The engine is Changan's own brand, a 1.5T model, with adequate power but not particularly strong. For daily commuting, the power response is decent, and overtaking becomes easier once the turbo kicks in, though it feels a bit sluggish at startup. In terms of fuel consumption, it can reach 9L in city traffic, but drops below 7L during highway cruising. The key to saving fuel is to maintain steady throttle and avoid aggressive acceleration. The engine's reliability has been satisfactory, with no issues in two years. Maintenance costs about 200 yuan at local shops, but it's important to clean carbon deposits to prevent reduced turbo efficiency. This engine is often discussed in car owner groups, being smoother than the Baojun 730 and quieter than the Wuling Hongguang, making it suitable for budget-conscious ordinary car owners.
Was this review help?
17
3
Share
Expand All
More Forum Discussions

Can I Use 95 Octane Gasoline After Using 98 Octane?

Yes, you can use 95 octane gasoline after using 98 octane, but you should first use up the 98 octane gasoline before refilling with 95 octane. Gasoline is a volatile, flammable hydrocarbon mixture liquid derived from the distillation, cracking, or pyrolysis of petroleum, used as fuel. It appears as a transparent liquid, primarily composed of aliphatic hydrocarbons, naphthenic hydrocarbons, and a certain amount of aromatic hydrocarbons. Notes on refueling: 1. Refuel in the morning or evening when temperatures are relatively lower, as the same volume of gasoline can have a higher mass; 2. Avoid filling the tank completely when driving in the city, as this can increase engine load; 3. Do not wait until the tank is empty before refueling, as insufficient fuel can prevent the fuel pump from being submerged, reducing its lifespan; 4. Avoid refueling during thunderstorms, as the fuel nozzle might introduce stray currents into the fuel tank, increasing the movement of unstable gasoline molecules and posing fire or explosion risks.
2
0
Share

Where to Check the Emission Standard for a New Car?

Methods to check the emission standard for a new car include: 1. Bring the vehicle registration certificate and driving license to the vehicle management office for inquiry; 2. Check the environmental protection label; 3. Log in to the motor vehicle environmental protection website for inquiry; 4. Check the vehicle factory certificate; 5. Make a rough judgment based on the year the car was registered. The purpose of setting automobile emission standards is to control and reduce vehicle emission pollutants and improve ambient air quality. Automobile emission pollutants include: carbon monoxide, hydrocarbons, nitrogen oxides, and PM harmful gases. Solutions for non-compliant vehicle emissions include: 1. Clean the fuel injector; 2. Replace the piston sealing ring; 3. Use higher-quality fuel.
10
2
Share

Can National 5 Vehicles Still Be Registered Now?

National 5 vehicles cannot be registered now. National 5 represents the fifth phase of China's vehicle emission control standards, where higher numbers indicate stricter standards. These emission standards are used for testing new vehicles. Methods to determine a vehicle's emission standard include: 1. Check the annual inspection label on the vehicle's front windshield—National 3 is marked as 'iii', National 4 as 'iv', National 5 as 'v', and National 6 as 'vi'; 2. Visit the Motor Vehicle Environmental Protection website, enter the VIN and the last six digits of the engine number to query. The vehicle registration process is as follows: 1. Obtain the vehicle certificate; 2. Keep the triplicate purchase invoice; 3. Pay the vehicle purchase tax and obtain the tax certificate; 4. Register and inspect the vehicle at the DMV; 5. Choose a license plate number; 6. Pay the fee and install the plate after receiving it.
11
1
Share

Where is the engine number located on the new Santana?

The engine number of the new Santana is located in two places: 1. On the plastic shell of the engine timing cover; 2. On the engine block. Taking the 2021 Santana Manual Trend Edition as an example, it is a compact car with body dimensions of 4475mm in length, 1706mm in width, 1469mm in height, and a wheelbase of 2603mm. The 2021 Santana Manual Trend Edition is equipped with a 1.5L naturally aspirated engine, with a maximum power speed of 6100 rpm and a maximum torque speed of 4000 rpm. It uses a MacPherson independent suspension for the front suspension and a composite torsion beam non-independent suspension for the rear suspension.
11
0
Share

How to Switch Between High and Low Beams?

The steps to switch between high and low beams are: 1. Rotate the light control lever located on the left side of the steering wheel all the way forward to turn on the low beams; 2. Push the lever upward to turn on the high beams, then push it downward to turn off the high beams, completing the beam switching. High and low beams adjust the intensity of light based on the distance of the filaments: 1. High beams focus the light parallel, emitting a concentrated and bright light that can illuminate distant and high objects; 2. Low beams emit light beyond the focus, between 1 to 2 times the focal length, producing a divergent light that illuminates a larger area of nearby objects.
1
1
Share

How to Replace the Battery in an Older Mercedes ML430 Key?

The method to replace the battery in an older Mercedes ML430 key is as follows: 1. Push the small toothed switch at the end of the remote to the right to remove the mechanical key; 2. Insert the mechanical key into the gap at the bottom of the key and gently pry open the back cover; 3. Remove the old battery and replace it with a new one of the same model; 4. Reattach the back cover and the mechanical key. The Mercedes ML430 is a business SUV with the following body dimensions: length 4587mm, width 1834mm, height 1775mm, wheelbase 2849mm, minimum ground clearance 204mm, and fuel tank capacity 83 liters.
10
5
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.