What brand is the engine of the Changan Lingxuan?

1 Answers
DiKayden
07/30/25 7:45am
The engine of the Changan Lingxuan is independently produced by Changan Automobile and belongs to a domestically manufactured engine. The 1.5T version of the Changan Lingxuan engine has the model number H15T-AA, with a maximum power of 115kw, maximum torque of 225 Nm, and maximum horsepower of 156. The 1.6L version has the model number JL478QEA, with a maximum power of 92kw, maximum torque of 160 Nm, and maximum horsepower of 125. For daily maintenance of the Changan Lingxuan engine, the following methods can be used: Use lubricating oil of the appropriate quality grade. For gasoline engines, select SD--SF grade gasoline engine oil based on the additional equipment of the intake and exhaust systems and usage conditions; for diesel engines, choose CB--CD grade diesel engine oil according to mechanical load, with the selection standard not lower than the manufacturer's requirements; Regularly change the oil and oil filter. The quality of any grade of lubricating oil will change during use. After a certain mileage, performance deteriorates, leading to various engine problems. To avoid faults, change the oil regularly according to usage conditions and maintain an appropriate oil level; When oil passes through the fine pores of the filter, solid particles and viscous substances in the oil accumulate in the filter. If the filter is blocked and oil cannot pass through the filter element, it may burst the filter element or open the safety valve, allowing oil to bypass through the bypass valve and carry contaminants back to the lubrication area, accelerating engine wear and increasing internal pollution; Regularly clean the crankcase. During engine operation, high-pressure unburned gas, acids, moisture, sulfur, and nitrogen oxides from the combustion chamber enter the crankcase through the gap between the piston rings and cylinder walls, mixing with metal powder from component wear to form sludge. A small amount remains suspended in the oil, while a large amount precipitates, clogging filters and oil passages, making engine lubrication difficult and causing wear; Regularly use radiator cleaner to clean the radiator. Removing rust and scale not only ensures the engine operates normally but also extends the overall lifespan of the radiator and engine.
Was this review help?
7
5
Share
More Forum Discussions

What's the reason for the motor not responding?

The motor not responding is caused by severe wear of the starter carbon brushes, failure of the starter control mechanism, or damage to the starter clutch. Below are the relevant explanations: Severe wear of the starter carbon brushes: The symptom during startup is weak starting power, and it can be clearly seen through the belt and pulley that the crankshaft is rotating very slowly. When the wear is extremely severe, the starter cannot drive the crankshaft to rotate at all, and only the sound of electric current is heard. Failure of the starter control mechanism: In addition to the starting motor, the starter assembly also includes an electromagnetic control mechanism. When the control mechanism fails, the small flywheel gear cannot engage with the large flywheel gear, making it impossible to start the engine. The symptom is that when turning the key to ignite, only the sound of the starter rotating at high speed is heard, without the sound of the engine crankshaft flywheel operating. Damage to the starter clutch:
11
5
Share

Where is the headlight switch on the Kawasaki 400?

The turn signal is in the middle of the left handlebar. Pushing it to the left activates the left turn signal, and pushing it to the right activates the right turn signal. Here are the detailed descriptions of the related functions: Headlight: To alert other vehicles to yield, the always-on function is equivalent to the currently popular daytime running lights, and it also helps stabilize the charging system to some extent. How to turn on the headlight: On the left side of the combination switch on the handlebar, the turn signal switch can be rotated forward to turn on the headlight, which has two positions: the first position is for the small light, and the second position is for the headlight. There is also a switch on the left side of the instrument panel that serves as the headlight switch. This switch is relatively large and is operated by rotating it to the right. The first position is for the small light, and the second position is for the headlight.
15
2
Share

How long does it take to receive a renewed driver's license by mail?

It takes three to five days to receive the new driver's license by mail after renewal. Driver's license validity period: Article 56 of the "Regulations on the Application and Use of Motor Vehicle Driver's Licenses": If a motor vehicle driver has not accumulated 12 penalty points in any scoring cycle during the six-year validity period of the motor vehicle driver's license, the driver's license will be renewed with a ten-year validity period; if the driver has not accumulated 12 penalty points in any scoring cycle during the ten-year validity period of the motor vehicle driver's license, the license will be renewed with a long-term validity. Time regulations for driver's license invalidation: If the license expires less than one year, it can be renewed normally; if it expires between one and three years, the license will be canceled, but it can be renewed by passing the subject one exam; if it expires more than three years, the license will be invalid and cannot be renewed.
3
1
Share

What Causes a Car's Air Conditioning to Stop Cooling During Midday High Temperatures?

Reasons and solutions for a car's air conditioning not cooling: 1. Insufficient refrigerant in the car's air conditioning: Prolonged use of the car's air conditioning can deplete the refrigerant, leading to inadequate cooling and affecting the air conditioning's performance. Solution: Refill the air conditioning refrigerant. 2. Refrigerant leakage in the car's air conditioning: Once the refrigerant leaks, both the indoor and outdoor units of the car's air conditioning will operate normally, but there will be no cooling effect, resulting in the air conditioning not cooling. Solution: Inspect the car's air conditioning system for damaged components such as pipelines, air conditioning pumps, condensers, and evaporator boxes that may cause refrigerant leakage, then replace the faulty parts. 3. Dirty condenser in the car's air conditioning: If the car's air conditioning is not cleaned after prolonged use, various impurities can cover the condenser, preventing it from dissipating heat properly. This leads to excessive pressure and temperature in the air conditioning system, causing the air conditioning pump to stop working to protect the system, resulting in no cooling.
2
4
Share

Which direction should the shading surface of H4 LED headlights face?

H4 LED headlights perform better when the LED chips are oriented left and right. Below is relevant information about LEDs: 1. Introduction: LED automotive lights refer to the use of LED technology for both interior and exterior lighting in vehicles. Exterior lighting involves thermal limits and EMC issues, along with numerous complex standards for load testing. LED automotive lights can be widely used to create the vehicle interior environment, with a lifespan of 50,000 hours. The robust structure of LEDs makes them less susceptible to vibration, and there is no significant decrease in light output brightness during use. 2. Suitable applications for LED automotive lights: LED automotive lights are suitable for various automotive electronic lighting applications, including headlights (high beam and low beam), fog lights, taillights, brake lights, turn signals, daytime running lights, pedal illumination, instrument panel lights, license plate lights, door lights, interior lighting, marker lights, navigation, entertainment systems, backlighting, and indicator lights.
10
1
Share

Should the clutch be fully released when making a U-turn in first gear during Subject Three?

Whether the clutch needs to be fully released when making a U-turn in first gear during Subject Three can be divided into the following two situations: 1. Semi-clutch control of speed: If there are other vehicles also making a U-turn at the same location. 2. No need to press the clutch: If the traffic conditions at the U-turn location are good, there are no pedestrians, and no other vehicles making a U-turn. Additional information: Difficulties in Subject Three exam: 1. Speed and gear mismatch: Errors related to high gear at low speed and low gear at high speed should be noted during the exam. Before shifting gears, it is essential to adjust the speed to match the gear, then shift. During driving, glance at the speedometer every eight seconds to prevent such errors. 2. Deviation in straight-line driving: Many learners intentionally slow down due to concerns about not driving in a straight line, which is not advisable. This can actually increase the likelihood of the vehicle's trajectory deviating, so it is recommended to maintain a reasonable and steady speed.
16
2
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.