What brand is the engine of the Changan Eado?

What is the Principle of Drifting?

Drifting occurs when the rear wheels lose most (or all) of their grip, while the front wheels maintain their grip (losing at most a small portion, and ideally gaining additional grip). At this point, as long as there is a certain amount of lateral force on the front wheels, drifting will occur. Here is some relevant information: 1. Drifting: Drifting is a racing term that refers to a series of maneuvers where the direction the car is pointing differs significantly from its actual movement direction, causing the car to slide sideways through a turn. 2. Conditions for Drifting: Drifting occurs when static friction is converted into sliding friction. Precise control of factors such as the center of gravity, the relative angle and distance between sliding and static friction, and their magnitudes can make the drifting process controllable.

17

1

Share

What is the reason why the position lights do not work but the headlights do?

It may be a problem with the fuse or switch, and it needs to be repaired at a repair shop. The following are relevant precautions for car light maintenance: 1. First check if the lights are working properly during maintenance: When inspecting the lights, check whether various types of lights (such as turn signals, taillights, fog lights, etc.) are functioning normally. Additionally, it is necessary to check whether the direction of the headlight beam is misaligned and whether the brightness is sufficient. Regular inspection of the working condition of the lights can help you stay informed about their status and avoid accidents. 2. Regularly replace bulbs during light maintenance: Car light bulbs are consumables with a limited lifespan. Over time, bulbs will dim, reducing the illumination distance, which directly affects nighttime driving and poses a significant safety hazard. Therefore, once you notice that the bulbs have dimmed or the brightness of the two bulbs is inconsistent, replace them promptly to ensure driving safety. Moreover, avoid touching the bulbs directly with your hands when replacing them to prevent contamination and prolong their lifespan. 3. Frequently clean the lights during maintenance: Driving on roads after rain inevitably leads to splashes, and the car light covers may get covered in mud. Generally, light covers are made of special materials and have good sealing. However, mud spots on the light covers not only affect the car's appearance but also impair the lighting effect.

8

4

Share

What Does the Inspection Period Mean?

Here is the relevant introduction about the inspection period: 1. Inspection period: refers to the valid usage period of a driver's license. 2. If it is the first time applying for a driver's license: then the validity period of the driver's license is 6 years. 3. First renewal of the driver's license: If within the 6-year validity period, no scoring cycle has accumulated 12 points, a 10-year validity driver's license will be issued upon renewal. If one or more years accumulate 12 points, a 6-year validity driver's license will still be issued upon renewal. 4. After obtaining a 10-year validity driver's license: during the next renewal, if within the 10-year validity period, no scoring cycle has accumulated 12 points, a long-term valid driver's license will be issued upon renewal.

4

2

Share

What are the differences between Shell's different colors?

Shell's different colors have the following distinctions: 1. Different viscosity grades: Shell HX7 has three viscosity grades, which are 5W-30, 5W-40, and 10W-40. 2. Different grade rankings: Different color packaging represents different models, and their intended uses and levels vary. The grades from low to high are White Shell, Red Shell, Yellow Shell, Blue Shell, and Gray Shell. 3. Different classifications: White Shell HX2 and Red Shell HX3 are both mineral oils, Yellow Shell is divided into HX6 and HX5, and Blue Shell HX7 is a semi-synthetic oil. 4. Different oil qualities: In terms of oil quality, Shell's gray oil is the best, and the grade of Gray Shell oil is higher than that of Blue Shell oil.

19

5

Share

Which point to focus on when driving straight in Subject 2?

Simply observe the reference points. Below are relevant introductions about Subject 2: 1. Introduction: Subject 2, also known as the small road test, is part of the motor vehicle driver's license assessment and refers to the field driving skill test. 2. Small vehicle C1/C2 Subject 2 test items: Include five mandatory tests—reverse parking, parallel parking, stopping and starting on a slope, right-angle turns, and curve driving (commonly known as S-curves) (some regions have a sixth item: highway toll card collection). 3. Large vehicle Subject 2 test items: Include pole tests, stopping and starting on a slope, parallel parking, passing a single-plank bridge, curve driving, right-angle turns, passing a width-restricted gate, passing continuous obstacles, driving on bumpy roads, narrow road U-turns, as well as simulations of highways, continuous sharp mountain curves, tunnels, rainy (foggy) conditions, slippery roads, and emergency handling.

11

5

Share

What does a 2.0t displacement mean?

T stands for the model with a turbocharger (TURL). 2.0 simply refers to the displacement of a regular engine, which is 2.0 liters. 2.0T means the engine is equipped with a turbocharger, has a displacement of 2.0 liters, and can achieve power equivalent to or exceeding 2.4 liters. Fuel consumption is higher due to the increased power, but emissions are cleaner. Below is relevant information: 1. Engine displacement: Simply referred to as displacement, it is the total of the working volumes of all cylinders in the engine, the product of single-cylinder displacement Vh and the number of cylinders I. The working volume of a cylinder refers to the gas volume swept by the piston from top dead center to bottom dead center, also known as single-cylinder displacement, which depends on the cylinder bore and piston stroke. 2. Turbocharger: Essentially an air compressor that increases air intake by compressing air. It utilizes the inertial impulse of the exhaust gas from the engine to drive the turbine in the turbine chamber, which in turn drives the coaxial impeller. The impeller compresses the air delivered from the air filter pipe, pressurizing it before it enters the cylinder.

6

4

Share

What brand is the engine of the Changan Eado?

What is the Principle of Drifting?

What is the reason why the position lights do not work but the headlights do?

What Does the Inspection Period Mean?

What are the differences between Shell's different colors?

Which point to focus on when driving straight in Subject 2?

What does a 2.0t displacement mean?

What is the purpose of registering a driver's license and vehicle registration certificate in rural areas?

Which is hotter, the upper or lower radiator hose?

What are the point deduction issues in Subject 1?

How Long Does It Take to Restore the Full Score After Deducting 6 Points?