···
Log in / Register

What brand is the engine of Jinbei 750?

6Answers
Amelia
07/29/2025, 04:04:22 AM

The engine brand of Jinbei 750 is dldg15, with a maximum horsepower of 112ps, maximum power of 82kw, and maximum torque of 147nm. It is paired with a 5-speed manual transmission. The front suspension of Jinbei 750 is MacPherson independent suspension, and the rear suspension is five-link coil spring non-independent suspension. Jinbei 750 adopts front-engine, front-wheel drive configuration. Its body dimensions are: length 4515mm, width 1750mm, height 1760mm, wheelbase 2725mm, fuel tank capacity 50l, and curb weight 1350kg.

Was this review help?
110
Share
DiAxel
08/12/2025, 11:39:48 PM

I've driven the Jinbei 750 a few times, and it uses the BM15 series engine from Brilliance Auto, which is actually the parent company behind Jinbei. This engine is independently developed. With a displacement of 1.5 liters, it delivers stable power output and smooth acceleration from a standstill, making it sufficient for urban driving conditions. Fuel consumption is well controlled, averaging around 7 liters in daily use, with fuel efficiency being a key advantage. Technically, it doesn't have complex components, relying instead on a double overhead camshaft to optimize airflow, which also makes maintenance straightforward. Jinbei has collaborated with Brilliance for many years, and the locally produced engines help save costs while maintaining high reliability. However, with prolonged use, it's essential to regularly check the engine oil to prevent carbon buildup from affecting performance.

Was this review help?
13
Share
Expand All
DelBrayden
10/05/2025, 12:08:39 AM

Owners of the Jinbei 750 are well aware that its engine is the Huachen BM15, designed with a focus on economy and practicality. It starts without hesitation and delivers decent power when climbing hills on highways. I've heard many owners use it for freight transport, praising the engine's durability and low failure rate, often requiring major overhauls only after averaging over 100,000 kilometers. Regular maintenance should not overlook spark plug replacements and keeping the air filter clean. The overall power tuning leans towards comfort, with good noise control, making long-distance driving less fatiguing.

Was this review help?
1
Share
Expand All
Bo
11/18/2025, 12:38:17 AM

The engine of the Jinbei 750 is produced by the Brilliance Group, and the model BM15 is independently developed. The brand originated from local cooperation, with Jinbei as a subsidiary of Brilliance, emphasizing cost-effectiveness in its engines. Features include a 1.5L displacement and low fuel consumption, designed specifically for urban use.

Was this review help?
18
Share
Expand All
HavenFitz
01/08/2026, 02:16:43 AM

From a repair perspective, the Jinbei 750's engine belongs to the Brilliance BM15 series, known for its reliable brand with fewer issues. Common maintenance includes oil changes every 5,000 kilometers, checking cylinder block sealing, and avoiding overheating. The simplified design of the powertrain makes repair parts easy to find.

Was this review help?
18
Share
Expand All
OJoshua
04/05/2026, 12:49:08 AM

In the market, compared to other microvans, the Jinbei 750 stands out with its Brilliance BM15 engine, highlighting its cost-effectiveness. Competitors like the Wuling Hongguang often use the GM series, while Brilliance's model offers lower fuel consumption, making it suitable for budget-conscious buyers. With a 1.5L displacement, it provides brisk acceleration, and its strong durability is a highlight.

Was this review help?
19
Share
Expand All
More Q&A

What is the fault when the fuel tank light flashes?

The flashing fuel tank light may be caused by a faulty fuel level sensor contact, and it is recommended to replace the fuel level sensor. The flashing fuel tank light may be caused by a faulty fuel level sensor contact, and it is recommended to replace the fuel level sensor. Below is relevant information about automobile fuel tanks: 1. Introduction: The automobile fuel tank is the full name of the car's fuel tank. Currently, with the development of the automobile industry and the revitalization of the domestic automobile industry, the demand for automobile fuel tanks from major automobile manufacturers is showing a clear upward trend. 2. Classification: Automobile fuel tanks are divided into iron fuel tanks and aluminum alloy fuel tanks based on materials. With the application and development of various new materials, the rust prevention issue of iron fuel tanks has become the biggest problem affecting fuel tank quality, especially in today's environmentally conscious era. Aluminum alloy fuel tanks not only meet the requirements in terms of strength but also have significant advantages in corrosion resistance compared to iron and other new materials. They have also become the preferred choice for large buses and heavy trucks, which consume large amounts of fuel and have high requirements for fuel quality. Automobile fuel tanks are classified into ordinary fuel tanks and heated fuel tanks based on functionality.
109
Share

How many kilometers can a full tank of gas last for the CFMOTO 650NK?

The CFMOTO 650NK can travel approximately 270 kilometers on a full tank of gas. This model is a street sports bike under the CFMOTO brand, equipped with a 649.3cc twin-cylinder water-cooled electronic fuel injection engine. The dimensions of the CFMOTO 650NK are 2120mm in length, 780mm in width, 1100mm in height, with a wheelbase of 1415mm. The front wheel uses a 120/70R17 58H tire, while the rear wheel uses a 160/60R17 69H tire. The bike adopts a lightweight design philosophy, featuring a lightweight, high-strength alloy frame and hollow hubs, which significantly enhances its riding performance. Additionally, it incorporates ergonomic principles, achieving excellent front-rear weight distribution comparable to other 600cc displacement bikes in its class.
103
Share

What Causes Severe Shaking When Starting the Car?

The reasons for severe shaking when starting the car are: 1. Carbon buildup on the valves and intake ports; 2. Insufficient fuel in the cylinders and inadequate power output; 3. After prolonged use of the engine, the ignition gap and timing control of the spark plugs in each cylinder vary, resulting in reduced power; 4. Errors in the control of the air-fuel mixture and ignition timing. The correct method to start a car is: 1. Insert the key and turn it to the ON position, at which point the vehicle's electrical system is activated; 2. All onboard computer chips and sensors receive power, requiring approximately 6 to 10 seconds for all sensors to complete a self-check; 3. After all dashboard indicators turn off, turn the key to start the engine, following the normal starting procedure.
113
Share

What are the rules for scheduling driving school exam appointments?

Driving school exam appointment scheduling rules are as follows: For first-time applicants scheduling the Subject 1 exam, the application date for initial driver's license or license upgrade serves as the scheduling sequence reference. For repeat Subject 1 exam scheduling, the date of the previous exam serves as the sequence reference. If a successfully scheduled examinee cancels due to personal reasons, the cancellation date becomes the new sequence reference. For cancellations due to non-personal reasons, the original sequence remains unchanged. Subject 2 scheduling is based on the passing date of Subject 1. For Subject 2 retakes, the previous Subject 2 exam date serves as the sequence reference. Maximum scheduling attempts for both Subject 2 and Subject 3 road driving skills exams are five times each (i.e., ten total exam opportunities). If the fifth attempt still fails, all previously passed subjects become invalid, requiring the student to restart from Subject 1. Subject 1 exam content includes driving theory fundamentals, road safety laws and regulations, and local traffic rules. Subject 2 refers to the field driving skills test, with C1/C2 vehicle tests comprising five mandatory items: reverse parking, parallel parking, hill start, right-angle turns, and S-curve driving. Subject 3 refers to the road driving skills and safe driving knowledge test. Subject 4, also called the theoretical exam, is part of the driver's license assessment.
107
Share

How Long Does a Waxing Last?

Waxing can last from 2 to 4 months. Car waxing effectively prevents paint aging, provides excellent water resistance, preventing water droplets from lingering on the vehicle surface, thus avoiding corrosion or dark spots on the paint. Additionally, it offers heat resistance by effectively reflecting light, preventing incident light from causing the paint or base coat to age or discolor. There are several misconceptions to avoid regarding waxing: 1. Higher-priced wax is not necessarily better. There are numerous types of car wax, each with different effects. Choose the appropriate wax based on its characteristics, your car's paint color, and driving conditions. 2. More frequent waxing is not better. Waxing should be done when the wax layer wears off.
107
Share

How Many Kilometers Should a BMW Drive Before Replacing Spark Plugs?

BMW spark plugs generally need to be replaced every 40,000 kilometers. If spark plugs are not replaced for a long time, it can cause various issues such as leakage in the vehicle's ignition system, increased fuel consumption, reduced power, and most importantly, difficulty in ignition, affecting the normal use of the vehicle. Spark Plug Replacement Interval: Under normal maintenance conditions, spark plugs should be replaced every 40,000 to 60,000 kilometers. However, this may vary depending on the brand and engine type, so it's recommended to follow the user manual. The following standards can be used as a reference for maintenance and replacement: platinum spark plugs should be replaced every 40,000 kilometers, standard nickel alloy spark plugs every 20,000 kilometers, and iridium spark plugs every 60,000 to 80,000 kilometers. Steps for Replacing Spark Plugs: Open the hood and lift the engine's plastic cover. Remove the high-voltage ignition wires, marking each cylinder's position to avoid confusion. Use a spark plug socket to remove the spark plugs one by one. While removing them, check for any external debris like leaves or dust and ensure they are thoroughly cleaned. Place the new spark plug into the spark plug hole, hand-tighten it a few turns, and then use the socket to tighten it further. Reinstall the high-voltage ignition wires in the correct firing order and secure the cover.
109
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.