What brand is the engine of GAC Trumpchi?

1 Answers
Alan
07/29/25 11:51pm
GAC Trumpchi's engines are independently developed and produced by Guangzhou Automobile Group Passenger Vehicle Co., Ltd., and are classified as domestically manufactured engines. All models under the GAC Trumpchi brand use independently developed engines. For example, the GAC Trumpchi GS3 is equipped with the 4A15K1 engine, which has a maximum power output of 124 kW, maximum torque of 265 Nm, and maximum horsepower of 169. For daily maintenance of GAC Trumpchi engines, the following methods can be applied: Use lubricating oil of appropriate quality grade. For gasoline engines, select SD-SF grade gasoline engine oil based on the additional equipment of the intake and exhaust systems and usage conditions. For diesel engines, choose CB-CD grade diesel engine oil according to mechanical load, with the selection standard not lower than the manufacturer's specified requirements. Regularly change the engine oil and filter. The quality of any grade of lubricating oil will change during use. After a certain mileage, the performance deteriorates, which can cause various problems for the engine. To avoid malfunctions, change the oil regularly according to usage conditions and maintain an appropriate oil level. When oil passes through the fine pores of the filter, solid particles and viscous substances in the oil accumulate in the filter. If the filter becomes clogged and oil cannot pass through the filter element, it may rupture the filter element or open the safety valve, allowing oil to bypass through the relief valve and carry contaminants back to the lubrication areas, accelerating engine wear and increasing internal contamination. Regularly clean the crankcase. During engine operation, high-pressure unburned gases, acids, moisture, sulfur, and nitrogen oxides from the combustion chamber enter the crankcase through the gap between the piston rings and cylinder walls. These mix with metal particles from component wear to form sludge. Small amounts remain suspended in the oil, while larger amounts precipitate, clogging filters and oil passages, making engine lubrication difficult and causing wear. Regularly use radiator cleaner to flush the radiator. Removing rust and scale deposits not only ensures the engine operates properly but also extends the overall lifespan of both the radiator and the engine.
Was this review help?
11
4
Share
More Forum Discussions

What are the effects of a bad ball joint in a car?

The effects of a bad ball joint in a car include: 1. Producing a knocking noise when driving on bumpy roads; 2. A damaged ball joint can cause slight displacement in the suspension, leading to errors in wheel alignment data, which may result in uneven tire wear and steering deviation; 3. During braking, a loose ball joint can cause uneven braking force on both sides, leading to steering deviation when applying the brakes. Composition of the car chassis: It consists of the transmission system, steering system, running system, and braking system. Methods for maintaining the car chassis: 1. Regularly inspect the condition of important assemblies; 2. Monitor the wear of brake pads and clutch plates; 3. Perform wheel alignment periodically; 4. Pay attention to tire pressure and wear conditions.
8
3
Share

What is the reason for the steering wheel exclamation mark preventing startup?

The reason for the steering wheel exclamation mark preventing startup is: There is a fault in the active steering system that requires inspection and repair. The correct steps to start a car are: 1. Start the car; 2. Shift the gear into N position; 3. Press the electronic handbrake; 4. Switch the gear to D position; 5. Step on the accelerator. The reasons for a car failing to start are: 1. Fuel supply system issues, such as clogged low-pressure fuel lines, loose pipes causing fuel leakage, air in high-pressure fuel lines, poor technical condition of injectors, incorrect injection timing angle; 2. Insufficient air intake, clogged air filter element; 3. Insufficient cylinder compression pressure, damaged cylinder gasket causing air leakage, valves not closing tightly causing air leakage, worn piston cylinder causing air leakage; 4. Starting device issues, such as power supply failure, poor contact of the electromagnetic switch, poor contact between the starter motor commutator and brushes, clutch slippage in the starter transmission mechanism.
18
0
Share

How to Turn on the Heating in a BMW 525?

The method to turn on the heating in a BMW 525 is as follows: 1. Start the car and properly warm up the engine; 2. Turn off the AC snowflake button; 3. Wait until the water temperature rises to the normal operating temperature; 4. Turn the knob to the red zone to activate the heating mode. Taking the 2021 BMW 525 as an example, it belongs to the mid-to-large-sized car category with the following dimensions: length 5106mm, width 1868mm, height 1500mm, wheelbase 3105mm, fuel tank capacity 68 liters, and curb weight 1705kg. The 2021 BMW 525 features a double-wishbone independent front suspension and a multi-link independent rear suspension. It is equipped with a 2.0L turbocharged engine producing a maximum horsepower of 184PS, maximum power of 135kW, and maximum torque of 290Nm, paired with an 8-speed automatic transmission.
13
3
Share

What is the bulb model for Mazda CX4?

Mazda CX4 uses H4 bulbs, with additional details as follows: Common headlight bulb models: Different vehicles may use different headlight bulb models. Common models include H1, H3, H4, H7, and H11. Among current mainstream vehicle models, H3 and H11 bulbs are primarily used for fog lights, while H4 bulbs are commonly found in Korean and Japanese vehicles where high and low beams are integrated into a single bulb. H1 and H7 bulbs are predominantly used in European vehicles for high and low beam functions. Automotive headlight introduction: Automotive headlights, also referred to as vehicle headlamps or LED daytime running lights, serve as the "eyes" of a car. They not only contribute to the owner's external image but are also crucial for safe driving during nighttime or adverse weather conditions. Headlight boosters: Headlight boosters employ scientific voltage regulation to provide optimal and stable working voltage specifically for vehicle headlights. They feature a 3-6 second preheating protection for bulb filaments during startup. Once activated, the headlights emit consistent, bright white light unaffected by engine RPM fluctuations. These devices maintain the original headlight beam pattern without increasing electrical load on the vehicle's wiring system, offering safe and practical installation with extreme simplicity.
12
3
Share

Where is the steering wheel heating in the Magotan?

The Magotan does not come with a steering wheel heating feature. The Magotan is a mid-size sedan under the Volkswagen brand. Taking the 2020 Comfort model as an example, its body dimensions are: length 4865mm, width 1832mm, height 1471mm, with a wheelbase of 2871mm and a fuel tank capacity of 66 liters. The 2020 Comfort Magotan is equipped with a MacPherson independent front suspension and a multi-link independent rear suspension. It is powered by a 1.4L turbocharged engine, delivering a maximum horsepower of 150PS, a maximum power of 110kW, and a maximum torque of 250Nm, paired with a 7-speed dual-clutch transmission.
11
3
Share

Where is the steering wheel heating in the Volkswagen Magotan?

The Volkswagen Magotan does not come with a steering wheel heating feature. Taking the 2020 Volkswagen Magotan as an example, it is a mid-size sedan with the following dimensions: length 4865mm, width 1832mm, height 1471mm, wheelbase 2871mm, fuel tank capacity 66l, and curb weight 1445kg. The 2020 Volkswagen Magotan is equipped with a MacPherson strut front suspension and a multi-link rear suspension. It is powered by a 1.4L turbocharged engine, delivering a maximum horsepower of 150PS, maximum power of 110kW, and maximum torque of 250Nm, paired with a 7-speed dual-clutch transmission.
13
1
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.