What brand is the CVT transmission of the Geely Vision?

1 Answers
LaArthur
07/28/25 7:33pm
The CVT transmission of the Geely Vision is from the Punch brand. The functions of the transmission are: 1. To change the transmission ratio, expanding the range of torque and speed variations of the driving wheels, allowing the engine to operate under favorable conditions; 2. To enable the car to reverse while maintaining the same rotation direction of the engine; 3. To use neutral gear to interrupt power transmission, allowing the engine to start and idle, facilitating gear shifting or power output. Taking the 2020 Geely Vision as an example, its body dimensions are: length 4599mm, width 1747mm, height 1482mm, with a wheelbase of 2615mm and a body weight of 1210kg.
Was this review help?
8
5
Share
More Forum Discussions

Where is the BMW dashboard light switch?

The car light switch is located on the control lever under the steering wheel, usually on the left side. Lifting or pressing it up and down changes the light. The hazard warning lights (double flashing lights) are usually near the center console, represented by the only red button. Pressing it down activates the double flashing. The fog lights are typically on the headlight control lever, marked with a fog light symbol. Rotating it forward turns on the front fog lights, and rotating it backward turns on the rear fog lights.
5
1
Share

How to close the sunshade after opening the BMW sunroof?

Depress the brake pedal of the BMW Brilliance 525 to prepare for engine startup. Press the one-touch start button of the BMW Brilliance 525 to start the engine. The dashboard lights up, and the vehicle's power supply is activated. Push the sunroof switch of the BMW Brilliance 525 to the open direction until the sunroof is fully opened, then continue pushing for 10 seconds to complete the reset operation.
2
0
Share

How to Bleed the Clutch on a Baojun 730?

You can use a plastic hose, with one end connected to a bicycle pump and the other end tightly pressed against the vent hole of the clutch reservoir cap. Loosen the clutch slave cylinder bleed screw and place a container to collect the expelled hydraulic fluid. At this point, the clutch slave cylinder is in the oil-draining position, and the hydraulic fluid from the reservoir will immediately flow through the slave cylinder to the bleed screw. During the bleeding process, pay special attention to adding hydraulic fluid. When the expelled fluid shows no air bubbles, you can tighten the bleed screw.
18
3
Share

How to Learn Car Modification?

To learn car modification, the first step is to understand the performance of the car. Then, familiarize yourself with the various parts and components of the vehicle. Finally, apply your theoretical knowledge through hands-on practice to master the process. Learning car modification can range from simple to challenging. Simple modifications mainly involve exterior accessories, while more complex ones, like engine modifications, focus on the core internal components of the vehicle. Understanding the structure of a car is not an easy task. Once you grasp the construction of one car, others may vary in size and design. Therefore, a solid foundation in the theoretical knowledge of car modification is essential.
1
4
Share

What is the difference between semi-automatic block system and automatic block system?

An automatic block system does not require manual operation or manual block procedures. More relevant information is as follows: 1. Semi-automatic block: This type of block requires manual block procedures. Trains depart based on the display of the departure signal, but after the train departs, the departure signal can automatically close, hence it is called semi-automatic block. 2. Automatic block: Based on the train operation and block section conditions, the signals can automatically change their displays. Trains operate according to the signal displays. This block method is entirely automatic, hence it is called automatic block. The automatic block is a device where the block task is automatically completed by the running train.
3
1
Share

What is the manual unlocking method for the Baojun 510?

Here is the manual unlocking method for the Baojun 510: 1. The mechanical door lock of the Baojun 510 is hidden under the decorative cover of the left front door handle. If the remote key runs out of battery, you can use the mechanical door lock to open the door. 2. Insert the key into the hole under the decorative cover, push the key into the hole while sliding the decorative cover backward to separate it. 3. Lift the handle, then push the edge of the decorative cover to expose the mechanical door lock. Insert the mechanical key to unlock. 4. After unlocking, reinstall the decorative cover. Note that when installing the cover, lift the handle first to ensure proper alignment.
7
4
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.