···
Log in / Register

What brand is the Civic engine?

3 Answers
McManuel
08/28/25 5:44am
The Civic is equipped with Honda's Earth Dreams series of turbocharged direct-injection engines, utilizing Honda's proprietary technology, and is classified as a domestically produced engine. The Civic's 1.5T engine model is the L15B8, delivering a maximum power of 130kW and a maximum torque of 220Nm. The 1.0T engine model is the P10A1, with a maximum power of 92kW and a maximum torque of 173Nm. For daily maintenance of the Civic's engine, the following methods can be employed: Use lubricating oil of the appropriate quality grade. For gasoline engines, select SD--SF grade gasoline engine oil based on the additional equipment in the intake and exhaust systems and usage conditions; for diesel engines, choose CB--CD grade diesel engine oil according to mechanical load, with the selection standard not lower than the manufacturer's specified requirements; Regularly change the engine oil and filter. The quality of any grade of lubricating oil will deteriorate over time with use. After a certain mileage, its performance will degrade, leading to various engine issues. To prevent malfunctions, change the oil regularly based on usage conditions and maintain an appropriate oil level; As oil passes through the fine pores of the filter, solid particles and viscous substances accumulate in the filter. If the filter becomes clogged and oil cannot pass through, the filter may burst or the safety valve may open, allowing oil to bypass the filter through the bypass valve, carrying contaminants back to the lubrication areas, accelerating engine wear and increasing internal contamination; Periodically clean the crankcase. During engine operation, high-pressure unburned gases, acids, moisture, sulfur, and nitrogen oxides from the combustion chamber enter the crankcase through the gap between the piston rings and cylinder walls, mixing with metal particles from component wear to form sludge. In small amounts, it remains suspended in the oil; in large amounts, it precipitates, clogging filters and oil passages, making engine lubrication difficult and causing wear; Regularly use a radiator cleaner to flush the radiator. Removing rust and scale deposits not only ensures the engine operates properly but also extends the overall lifespan of both the radiator and the engine.
Was this review help?
11
5
Share
GarrettLynn
09/10/25 4:05am
I've been commuting with my Civic, and the Honda engine is truly impeccable in quality. The older model I bought ten years ago still runs smoothly today, with low fuel consumption, minimal vibration, and easy maintenance—it's worry-free. Honda is renowned for its reliable engines, and the Civic series, from the base model to the Type-R, utilizes Honda's proprietary technology, such as the Earth Dreams engine in the tenth generation, which offers strong performance while being eco-friendly. Acceleration is smooth even in traffic jams, and long highway drives don't risk overheating. Remember to change the oil and air filter regularly to extend its lifespan. Overall, Honda engines make the Civic an excellent choice for family use, and you won't want to replace it even after years of driving.
Was this review help?
7
5
Share
Expand All
DaisyRose
10/24/25 4:56am
As a car enthusiast, I know the Civic engine inside out—it's a Honda product. Developed in-house by Honda, technologies like the DOHC i-VTEC system are applied in most models, optimizing intake and exhaust to enhance power efficiency. The ninth-gen Civic used the R18 series, while the tenth-gen switched to the L15B turbo, reducing fuel consumption by 15% and delivering smoother driving dynamics. At car meetups, owners often praise its durability and low failure rate, though the coolant temperature sensor needs attention. Compared to Toyota, Honda engines lean toward sportier tuning with a more pleasing exhaust note. For maintenance, a check-up every 5,000 km is recommended.
Was this review help?
2
0
Share
Expand All
More Forum Discussions

Which automobile company does the Lynk & Co 03 belong to?

Lynk & Co 03 is the third mass-produced model under the Lynk & Co automotive brand. Below are some details about this vehicle: 1. Exterior Design. The front features a split-type headlight assembly, paired with a horizontal front grille and lower decorative strip. The side profile maintains a traditional three-box sedan silhouette with smooth C-pillar lines, while the rear adopts 'L'-shaped taillights and a black decorative panel integrating reflectors. 2. Interior Design. The Lynk & Co 03 adheres to the brand's family design language, featuring a wrap-around sporty cockpit, a driver-centric integrated smart center console, race-inspired air vents, and a D-shaped sport steering wheel. The three-spoke steering wheel comes with multifunction buttons and is complemented by a digital instrument cluster. 3. Powertrain. The Lynk & Co 03 is powered by a 1.5TD high-efficiency engine from the Drive-E series. The turbo engages at 1000 rpm, delivering 150N·m of torque, and reaches its peak torque of 265N·m at 1500 rpm.
11
4
Share

How to reset the tire pressure light on Emgrand GL?

Emgrand GL tire pressure light reset method: Inflate the tires to the standard pressure to eliminate the tire pressure light; or press the MENU button on the turn signal lever, select the tire pressure display item in the mileage/fuel information menu, and then press the Set/Clr button. The driver information center will display "Tire Pressure Relearn," select "Yes," press the Set/Clr button, and the horn will sound twice to reset. There are generally three reasons for abnormal tire pressure: Abnormal tire pressure: Usually, an alarm will trigger if the pressure is below 1.8 bar or above 3.0 bar. In this case, tire inspection and pressure adjustment are required. Tire pressure monitoring not reset: After inflating the tires, if the tire pressure is not reset in time, the tire pressure monitoring system will still record the previous data, causing the tire pressure monitoring light to illuminate. A simple tire pressure reset will resolve this issue. Damaged tire pressure sensor: The tire pressure sensor, which monitors tire pressure, is installed inside the tire and connected to the tire inflation valve. If the sensor is damaged due to impact while driving, the tire pressure warning light will illuminate. For sensor damage, the only solution is to replace it with a new part.
14
5
Share

Do I still need to engage the electronic handbrake when in P gear?

Yes, it is necessary. The electronic handbrake is a technology that achieves parking braking through electronic control. For prolonged parking, the handbrake must be engaged; otherwise, it may damage the locking mechanism of the automatic transmission. Here is some relevant information about the electronic handbrake: 1. Principle: The electronic handbrake is a technology that achieves parking braking through electronic control. Its working principle is the same as that of a mechanical handbrake, both relying on the friction generated between the brake disc and brake pads to control parking braking. The only difference is that the control method has changed from the previous mechanical handbrake lever to an electronic button. 2. Function: The electronic handbrake has evolved from the basic parking function to include the automatic parking function AUTO-HOLD. The application of AUTO-HOLD automatic parking technology eliminates the need for drivers to maintain prolonged braking when the vehicle is stationary. When the automatic electronic parking brake is activated, it can prevent unnecessary sliding of the vehicle.
3
5
Share

How to Adjust the Seat?

Adjusting the seat involves the following steps: 1. Adjust the distance between the seat and pedals: The driver's legs should remain slightly bent when fully depressing the pedals, ensuring comfortable pedal control. 2. Adjust the distance between the steering wheel and the driver: Extend your arms straight to rest on the top of the steering wheel, with your wrists naturally touching the wheel's edge. 3. Adjust hand positioning on the steering wheel: Place your left hand at the 9 o'clock position and your right hand at the 3 o'clock position. Keep your thumbs on the outer edge of the wheel without hooking them inward, to maintain steering flexibility and prevent finger injuries during emergency maneuvers.
6
0
Share

What are the differences between the Audi A6 Dynamic and Elegance models?

Audi A6L Dynamic and Elegance models differ mainly in three aspects: body length, curb weight, and exterior configurations: Body length: The Audi A6L Elegance model has a body length of 5038mm, while the Dynamic model measures 5050mm. Curb weight: The Audi A6L Elegance model weighs 1810kg, whereas the Dynamic model weighs 1830kg. Exterior configurations: Compared to the Elegance model, the Dynamic model features a sport appearance package. Apart from these three differences, all other aspects of the Audi A6L Dynamic and Elegance models are identical. In terms of power, both are equipped with a 2.0T turbocharged engine, delivering a maximum horsepower of 224Ps, maximum power of 165KW at 5000-6000rpm, and maximum torque of 350NM at 1600-4500rpm. In terms of configurations, both models come standard with 360-degree panoramic imaging, cruise control, engine start-stop technology, automatic parking function, hill-start assist, and more. The interior includes a multifunctional steering wheel, a trip computer display screen, and a 12.3-inch full LCD instrument panel.
12
1
Share

What Causes Cracks on the Sidewall of Car Tires?

The reasons for cracks on the sidewall of car tires are: 1. Natural aging of the tire; 2. Impact damage to the tire. Precautions for using car tires include: 1. When inflating tires, reduce the tire temperature to normal levels to avoid affecting pressure judgment; 2. Inflate to around 2.5bar; 3. Regularly check the wear level of car tires; 4. Avoid exposing tires to high temperatures. The extent to which tire cracks require replacement is: 1. Cracks appear on the tire sidewall; 2. Cracks are too long or deep, reaching the standard tread depth of 1.6mm; 3. Tire bulging occurs; 4. Wavy cracks on the tire surface; 5. Obvious scratches or punctures on the tire surface.
14
5
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.