What Brand is the Car with Three Arrow Logos?

1 Answers
ArthurLee
07/30/25 2:54am
Three arrow logos represent Maserati. The Maserati logo draws inspiration from the weapon of Neptune, the Roman god of the sea, symbolizing the immense power of the sea god. Maserati is a luxury car brand from Italy, with its most famous model being the Maserati Quattroporte. Below is some relevant information about Maserati: Maserati, an Italian luxury car manufacturer, was founded on December 1, 1914, in Bologna, with its headquarters now located in Modena. The brand's logo features a trident. In 1993, Fiat acquired Maserati, ensuring the preservation of the brand.
Was this review help?
8
2
Share
More Forum Discussions

What Causes Vehicle Shaking and Lack of Power During Acceleration?

The reasons for car shaking and lack of power during acceleration are as follows: 1. Severe engine carbon deposits: The most common cause of car shaking is a dirty throttle body or excessive carbon buildup in the fuel injectors. When there is too much carbon buildup inside the engine, the gasoline sprayed by the cold-start injector can be largely absorbed by the carbon deposits, resulting in an overly lean air-fuel mixture during cold starts and making it difficult to start. In this situation, the car will only start easily once the carbon deposits have absorbed enough gasoline to reach saturation. 2. Ignition system issues: Check the condition of the spark plugs, high-voltage wires, and ignition coils. Poor performance in the ignition system or weak spark plug firing can also lead to such symptoms. 3. Unstable fuel pressure: If you have already cleaned the engine carbon deposits, throttle body, replaced the fuel filter, and spark plugs, but still notice shaking at idle, it is recommended to visit a 4S shop to check the fuel supply pressure and the intake pressure sensor. Abnormal fuel pump pressure or incorrect readings and poor performance of the intake pressure sensor can both cause the vehicle to shake. 4. Aging engine components: Car shaking can also be related to worn engine mounts. Engine mounts are essentially the shock absorbers for the engine, responsible for absorbing minor vibrations during operation. If the engine mounts are faulty, these vibrations can be transmitted to the steering wheel and the interior of the car, causing shaking at idle.
6
4
Share

What is the appropriate temperature setting for a car's automatic air conditioning?

The most suitable temperature for car air conditioning in summer should be 21-25°C, and in winter it should be 25-28°C. This is the automotive comfort environment standard established by the car air conditioning industry. Below are the detailed explanations: 1. Suitable temperature range: The temperature difference between the inside of the car and the external environment should not be too large. The ideal temperature difference between the inside and outside of the car is within 10°C for sedans and 8-12°C for large buses. When using the air conditioning for a long time, you can periodically open the windows slightly to ensure fresh air inside the car and avoid "air conditioning sickness." 2. Precautions for using air conditioning: Prolonged use of the internal circulation mode can reduce the oxygen level inside the car, and harmful gases such as carbon monoxide produced by incomplete engine combustion may accumulate in the car. Therefore, it is necessary to periodically switch to the external circulation mode to allow fresh air from outside to enter the car.
10
5
Share

What is the function of the small fan at the car air vent?

The function of the small fan at the car air vent is to disperse the airflow in various directions or to direct it in a single direction. Below is a related introduction to car fans: Location: The car fan blows towards the radiator to cool it down and dissipate heat from the engine. It should not blow towards the engine as this would increase the engine's temperature. The fan is installed behind the radiator and shares the same axis as the water pump. Classification: Fans used in car engines are categorized by their structural principles into axial flow fans and centrifugal fans. Based on their driving mechanisms, they are classified into mechanically driven and electrically driven fans. Modern car engines widely use electrically driven centrifugal fans.
16
2
Share

When will Jiangmen implement China 6 emission standards?

Jiangmen's China 6 emission standards were implemented starting from July 1, 2019. The introduction of the China 6 emission standards is beneficial for both the future development of the automotive industry and the overall human travel environment. Relevant information about automotive emission standards is as follows: 1. Introduction: Automotive emission standards refer to regulations on the content of harmful gases such as CO (carbon monoxide), HC+NOx (hydrocarbons and nitrogen oxides), and PM (particulate matter, soot) emitted from vehicle exhaust. 2. Implementation status: Starting from January 1, 2004, Beijing changed the tail gas emission standards for motor vehicles from Euro I to Euro II. By 2008, the Euro III standard was officially implemented.
17
4
Share

How Much Oil Should Be Added to an Air Pump?

Add oil up to half of the oil sight window. Additional information: Booster Pump: A booster pump is a type of plunger pump. When the vehicle air pump is in operation, it runs rapidly and repeatedly. As the output pressure continuously increases, the reciprocating motion of the pump slows down and gradually stops. At this point, the pump's pressure stabilizes, energy consumption becomes very low, and various components gradually cease operation. Air Pump Principle: During the operation of the air pump, if any factor causes a drop in the pressure of the pressure-holding circuit, the booster pump will automatically start. This effectively compensates for the leaked pressure, ensuring more stable circuit pressure.
18
5
Share

Why is the car's center control screen flickering?

The flickering of the dashboard screen light is usually caused by poor contact, and further inspection is recommended. However, it could also be due to system issues. Here is some relevant information about the dashboard: Concept: The dashboard can come with external lighting and may be attached to a control console. It comes in various forms and specifications, allowing for the installation of different instruments as needed. Various dashboards can also be combined into a single unit as required. Flight Instruments: Typically, a flight instrument panel is equipped with six basic instruments: the airspeed indicator, attitude indicator, altimeter, turn coordinator, heading indicator, and vertical speed indicator.
12
0
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.