What brand is the Besturn T77 engine?

2 Answers
DeFaith
07/28/25 9:34pm
The Besturn T77 engine is from the FAW brand. The engine model code for this vehicle is CA4GA12TD, with a maximum power output of 105 kW and maximum torque of 204 N·m. The engine reaches its peak power at 5,500 rpm and delivers maximum torque between 1,600 to 4,200 rpm. It features direct fuel injection technology and utilizes an aluminum alloy cylinder head with a cast iron cylinder block. The Besturn T77 measures 4,525 mm in length, 1,845 mm in width, and 1,615 mm in height, with a wheelbase of 2,700 mm. It employs MacPherson strut front suspension and a torsion beam rear suspension system.
Was this review help?
19
2
Share
McAriana
08/12/25 2:12am
As a car enthusiast deeply fascinated by automotive technology, after driving the Bestune T77, I can confirm its engine is indeed an independently developed brand, belonging to the FAW Bestune family, specifically the CA4GB series 1.2T turbocharged engine. This engine packs a punch with a maximum horsepower of around 140, delivering smooth acceleration on highways while remaining fuel-efficient in city traffic. The official fuel consumption is approximately 6.7L/100km, which I attribute to its direct fuel injection technology. Compared to joint-venture cars in the same price range, it offers high cost-effectiveness and simple maintenance—routine servicing only requires oil and filter changes. My online research shows that Bestune is making rapid progress among domestic brands, and this engine boasts good durability, capable of running over 100,000 kilometers without major issues, making it quite suitable for family commuting.
Was this review help?
4
5
Share
Expand All
More Forum Discussions

How to Deal with Foggy Windows When Using Air Conditioning in Summer?

Here are the solutions for foggy windows when using air conditioning in summer: 1. When encountering foggy windows, you can spray anti-fogging agent to eliminate the fog on the glass. Spray a small amount of anti-fogging agent on the car window and wipe it clean. This will form a thin protective film on the glass, effectively preventing water vapor from condensing and forming a fog layer. 2. You can also use soapy water, dishwashing liquid, or alcohol as substitutes for anti-fogging agents. These can ensure the car windows remain fog-free for several days. 3. Additionally, you can use the car's dehumidification function to remove fog. If the humidity is too high and the air conditioning is not effective enough, opening the car windows can quickly reduce the humidity inside the car cabin.
13
2
Share

Where are Huatai Auto's factories located?

Huatai Auto has three major factories located in: Rongcheng Factory in Shandong, Tianjin Huatai New Energy Production Base, and Ordos Factory. Below is a partial introduction to these three factories: 1. Rongcheng Factory: The Rongcheng base is equipped with production lines for stamping, welding, painting, body interior assembly, complete vehicle assembly, and vehicle inspection, primarily manufacturing the Santa Fe, B35, and new energy vehicles. 2. Tianjin Huatai New Energy Production Base: The most important new energy production base for Huatai Auto. 3. Ordos Factory: Huatai Auto's largest production base in the western region.
13
3
Share

What do the different gears in a Volkswagen automatic transmission represent?

Volkswagen automatic transmission gears represent forward, park, reverse, and parking. Below is a detailed introduction to the automatic transmission gears: P gear: Parking gear, used when parking. D gear: Drive gear, but currently most are manual-automatic transmissions. After shifting to D gear, you still need to move forward (up) or backward (down) or left and right to operate the manual mode or S gear sport mode. It is neither reasonable nor convenient in the middle position, and the final position is more reasonable. R gear: Reverse gear. If it is swapped with N gear, which is the neutral gear, being adjacent makes it easy to accidentally shift to the drive gear, which can lead to traffic accidents or damage the transmission. Therefore, the N gear is used as a separator in the middle, and it is also convenient to shift to neutral when parking, for waiting at red lights or brief stops. N gear: Neutral gear, with reverse gear above and drive gear below, allowing smooth shifting up and down.
2
5
Share

What is the fuel tank capacity of the Audi A8 in liters?

The 2022 Audi A8 offers a total of 5 models, all with a fuel tank capacity of 82 liters. The vehicles are equipped with either a 4.0-liter twin-turbocharged engine or a 3.0-liter turbocharged engine, paired with an 8-speed automatic transmission. All models feature front-engine, all-wheel-drive configuration. In the same vehicle class, the 2022 Mercedes-Benz S-Class has a fuel tank capacity of 76 liters, the 2021 Lexus LS has an 82-liter tank, and the 2021 BMW 8 Series comes with a 68-liter fuel tank. During actual refueling, the amount of fuel may exceed the nominal capacity. This occurs because automakers specify the tank capacity from the bottom of the tank to a safe fill level, leaving additional space between the safe level and the tank opening. This safety margin allows for fuel expansion when temperatures rise, preventing overflow. If fuel is filled up to the tank opening during refueling, the actual fuel quantity may exceed the nominal tank capacity. To check remaining fuel levels, drivers can observe the fuel gauge on the right side of the instrument panel, marked with E (Empty) and F (Full). When the needle approaches E, it indicates low fuel, while proximity to F shows sufficient fuel levels.
16
5
Share

Do You Need to Drive the Car for Vehicle Transfer?

For vehicle transfer, the car must be driven to the relevant office. Article 19, Paragraph 1 of the "Motor Vehicle Registration Regulations" stipulates: When applying for transfer registration, the current owner of the motor vehicle must fill out an application form and submit the vehicle for inspection. For motor vehicle transfer registration, i.e., transfer of ownership, the vehicle must be submitted for inspection. Since the vehicle needs to be inspected, it naturally means driving the vehicle to the vehicle management office. Therefore, the vehicle to be transferred must be driven there. According to Article 19, Paragraphs 2 and 3 of the "Motor Vehicle Registration Regulations," when processing transfer registration, the vehicle management office must confirm the vehicle, verify the vehicle identification number (VIN) imprint, review submitted documents and certificates, and retrieve the license plate and vehicle registration certificate. This also requires on-site inspection of the vehicle. Detailed process for vehicle transfer: Issue transaction documents: Pay the used car transaction tax. Private accounts are charged 1%, while corporate accounts are charged 4%. Vehicle inspection: Drive the car to the inspection area for external inspection, VIN tracing, license plate removal, and photography. Obtain vehicle photos and attach them to the inspection record form, then proceed to the transfer hall for filing procedures. License plate selection: Take a number from the dispenser and queue with relevant materials to pay the transfer fees. Transfer and relocation: Required materials include the Motor Vehicle Registration, Transfer, and Cancellation Form/Application for Transfer, inspection record form, original vehicle title certificate, original vehicle registration certificate, original owner's ID card, original license plate number, vehicle photos, and transfer invoice from the trading market. Documents required from the original owner for used car transfer include: vehicle title certificate, vehicle registration certificate, and ID card. The buyer needs to provide an ID card; if they are non-local residents, a residence permit or temporary residence permit is required. Vehicle transfer first requires vehicle evaluation. The evaluation fee is generally 1%-2% of the assessed vehicle value. Other fees include license plate and vehicle registration certificate costs. The original commercial insurance for the vehicle can be canceled (compulsory insurance cannot be canceled), or the insurance can be transferred to the buyer at the insurance company. Precautions when buying a used car: Incomplete documentation. Complete documentation for a used car includes: vehicle title certificate (or original purchase invoice), vehicle registration certificate, vehicle purchase tax payment certificate, road maintenance fee records, and compulsory insurance. Missing vehicle title certificates or registration certificates, or unpaid compulsory insurance or road maintenance fees, can cause endless trouble for the buyer. Therefore, if the seller cannot provide complete documentation, buyers should be especially cautious. Tampering with the odometer. Most consumers judge a car's condition based on the odometer reading, and sellers often take advantage of this by tampering with the odometer. In fact, the odometer is not just a record of usage intensity but also an indicator of when other vehicle components were repaired or replaced. If buyers follow maintenance schedules based on a tampered odometer, it can lead to a series of potential safety hazards. New paint hiding damage. When buying a used car, if the car has been repainted and there are signs of repairs around the front, rear, or A, B, and C pillars, the car may have been involved in a major accident. Engine tuning to inflate the price. Many buyers focus too much on the car's engine and neglect the body's condition. Used car sellers exploit this by replacing engine components to make the engine appear younger and inflate the price.
10
0
Share

How to Replace the Battery in a Buick Envision Car Key?

The specific steps to replace the battery in an Envision key are as follows: 1. Press the button on the transmitter to release the key. 2. Insert a flat tool into the bottom of the transmitter to separate it into two halves. 3. Press the battery and slide it toward the bottom of the transmitter to remove it. 4. Insert the new battery with the positive side facing the back cover. Press the battery down until it is securely in place. Use a CR2032 or equivalent battery for replacement. 5. Reattach the battery cover to the transmitter. Notes for replacing the key battery in a Buick Envision: When replacing the battery, do not touch any circuits inside the transmitter. Static electricity from the human body may damage the transmitter. The battery model for the Buick Envision key is CR2032.
5
1
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.