What brand is the audio system in the Volkswagen Sagitar?

1 Answers
MacVera
07/29/25 11:25pm
The Sagitar's audio system uses Desay SV Automotive speakers. Other audio configurations are not from well-known brands either, as they are produced by professional OEM factories. Essentially, it's a basic audio setup with four speakers and no subwoofer or similar equipment, so the music quality is as expected. If you're passionate about music, you'll likely need to consider aftermarket upgrades. Upgrading the Audio System: Upgrading an audio system usually follows a step-by-step process. The general sequence involves first replacing the speakers, then upgrading the amplifier, adding a subwoofer, and finally replacing the head unit. It's best to leave room for future upgrades and proceed gradually. Starting with a high-quality set of speakers can already significantly improve sound quality. Then, upgrading the amplifier and speakers, followed by a high-resolution head unit, can achieve HIFI-level audio performance. Choosing the Right Style: It's recommended to first identify your music preferences to select the appropriate brand and style. Properly matching the equipment, especially focusing on cable selection and wiring, as well as the installation, warranty, and waterproofing of the components, will lay a solid foundation for achieving optimal results with minimal effort.
Was this review help?
13
1
Share
More Forum Discussions

What is the tax rate for motorcycles?

The vehicle purchase tax rate for buying a motorcycle is 10%. The payable amount of vehicle purchase tax is calculated by multiplying the taxable vehicle's assessed price by the tax rate. The supplementary table of consumption tax items and rates stipulates: For cylinder capacity (displacement) below 250 ml (including 250 ml), the rate is 3%; for cylinder capacity above 250 ml, the rate is 10%. According to regulations: The consumption tax for small-displacement motorcycles with cylinder capacity below 250 ml (excluding 250 ml) has been abolished. Motorcycles with cylinder capacity of 250 ml and above (excluding 250 ml) continue to be subject to consumption tax at rates of 3% and 10% respectively.
7
5
Share

How Often Should Castrol Full Synthetic Engine Oil Be Changed?

Castrol full synthetic engine oil should be changed every 10,000 kilometers or once a year. Advantages of full synthetic oil: Compared to mineral oil and semi-synthetic oil, full synthetic oil has the following advantages: stable physicochemical properties, better lubricity, high-temperature oxidation resistance, and a longer oil change interval. It also has good low-temperature fluidity, making it easier to start the car in cold weather, and provides excellent engine cooling performance at high temperatures. Precautions for adding engine oil: When adding engine oil, avoid adding too much or too little. If there is too much oil, it will increase the resistance of moving parts. Excessive oil can also easily enter the combustion chamber and participate in combustion, leading to slow and incomplete combustion, resulting in unstable engine idle and easy stalling, as well as sluggish acceleration response.
5
5
Share

Can You Still Drive with Engine Valve Leakage?

It is recommended to perform repairs and adjust the valves as soon as possible. Effects of Valve Leakage: Valve leakage causes the vehicle to lose power. The air-fuel mixture being too rich or too lean leads to incomplete combustion in the combustion chamber, resulting in increased fuel consumption. Valve leakage also causes slow acceleration. Engine valve leakage can lead to difficulty starting the engine, reduced power, incomplete combustion, severe carbon buildup, and even cause individual cylinders to stop working. Causes of Valve Leakage: Valve leakage occurs due to valve erosion, which reduces the sealing between the valve and valve seat; the valve clearance being adjusted too small, causing the valve to not close tightly; carbon buildup on the valve and valve seat cone surfaces; debris getting stuck during valve installation, leading to poor sealing; pitting, scratches, marks, burns, or dents on the valve working surface; improper grinding of valve sealing rings during maintenance; excessive runout of the valve and valve stem; misalignment of the valve guide hole and seat hole exceeding standards, etc. Leakage between the cylinder head and cylinder block can also occur due to warped or uneven mating surfaces, scratches, or damaged cylinder gaskets.
18
5
Share

How Long Does It Take to Check Vehicle Violations?

Vehicle violations usually take 3 to 7 days to be visible in the system, as the traffic police department needs time for data entry and verification. The maximum processing time should not exceed 13 working days. Violation handling process: There's a procedure from when the violation occurs until it appears online, involving data collection, organization, review, entry, and transmission. The exact duration varies across different regions in China. Violation query timeline: For non-on-site violations (captured by cameras), it typically takes over 15 days to appear in the system, though one week is common. If you suspect a violation, you can check online after one week. For more definitive results, wait 15 days before checking.
12
1
Share

Is the Study Method Points Reduction Test for Subject One or Subject Four?

The Study Method Points Reduction test includes questions from both Subject One and Subject Four. Passing score for Subject One: The total duration of the Subject One test is 45 minutes, consisting of 100 questions in the form of true/false and multiple-choice questions, with a full score of 100 and a passing score of 90. The test papers are randomly selected and combined by the computer driver examination system according to the proportion specified in the "Motor Vehicle Driver's License Work Regulations". Examination process: Follow the arrangement of the staff and receive your own driving training file in order in the waiting room; Carry and present your ID card for inspection by the supervising officer; Mobile phones must be turned off when entering the examination area; No loud noise is allowed in the examination area; Regulation textbooks are not allowed to be brought into the examination room (or placed in the bag); After the examination, the examinee should keep their ID card properly and submit the file to the "Certificate Submission Window" at the front of the examination room; Examinees who pass the examination should sign under the guidance of the staff at the exit of the examination room before leaving; Examinees who fail the examination can leave the examination room immediately and wait for the notification of the retake time from the staff of their driving school.
5
1
Share

Can I make a left turn with 2 seconds of green light and 3 seconds of yellow light remaining?

You can make a left turn with 2 seconds of green light and 3 seconds of yellow light remaining without running a red light. Even if you pass through during the yellow light within these 3 seconds, it is acceptable. Function of traffic lights: Traffic lights are signals that direct traffic flow, typically consisting of red, green, and yellow lights. A red light indicates prohibition of passage, a green light indicates permission to proceed, and a yellow light serves as a warning. Classification of traffic lights: Traffic lights are categorized into motor vehicle signals, non-motor vehicle signals, pedestrian crossing signals, directional indicator lights (arrow signals), lane signals, flashing warning signals, and railway crossing signals.
2
0
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.