What brand is the audio system in the Avancier 370?

1 Answers
CooperLynn
07/28/25 4:46pm
The audio system in the Avancier 370 is from the Klav brand. Car audio systems are installed to alleviate the monotony of travel for drivers and passengers. The Avancier 370 is a new mid-size luxury SUV launched by GAC Honda, equipped with practical features such as one-touch engine start, electronic parking brake, seat heating, reverse radar, and vehicle stability system. The Avancier 370 is powered by a 2.0T direct-injection turbocharged engine, delivering a maximum power of 272 horsepower and a maximum torque of 370 Nm. It is paired with a 9-speed automatic transmission in the drivetrain system.
Was this review help?
20
3
Share
More Forum Discussions

What is the optimal mileage for the first maintenance of a new car?

3000-5000 kilometers. The first maintenance for a new car includes the following: 1. Check whether the coolant level meets the specified requirements. 2. Inspect the brake and clutch fluid levels. 3. Verify the power steering fluid level and check for any oil leaks at the system's pipe connections. 4. Examine the battery fluid level and the windshield washer fluid level. 5. Check the tension and aging condition of the belts for the generator, air conditioning, water pump, and power steering pump. 6. Ensure all front and rear lights are functioning, including headlights, width markers, turn signals, brake lights, reverse lights, and fog lights. 7. Inspect tire pressure and wear, tighten the tire bolts to the specified torque, adjust tire pressure to the manufacturer's recommended level, and rotate the tires if necessary based on wear. 8. Check whether the vehicle's exhaust emissions meet the standards.
12
5
Share

Are There Age Restrictions for Motorcycle Licenses?

There are age restrictions for motorcycle licenses. The age limit for light motorcycles is between 18 and 70 years old, while the age limit for regular three-wheeled motorcycles and regular two-wheeled motorcycles is between 18 and 60 years old. "Regulations on the Application and Use of Motor Vehicle Driver's Licenses": Article 59: Individuals aged 60 or above are not permitted to drive large passenger vehicles, tractors, city buses, medium-sized passenger vehicles, large trucks, trolleybuses, or tramcars. Those holding driver's licenses for large passenger vehicles, tractors, city buses, medium-sized passenger vehicles, or large trucks must apply at the vehicle management office where the license was issued or another office to exchange their license for one that permits driving small cars or small automatic transmission vehicles. Individuals aged 70 or above are not permitted to drive low-speed trucks, three-wheeled vehicles, regular three-wheeled motorcycles, regular two-wheeled motorcycles, or wheeled self-propelled machinery. Those holding driver's licenses for regular three-wheeled motorcycles or regular two-wheeled motorcycles must apply at the vehicle management office where the license was issued or another office to exchange their license for one that permits driving light motorcycles.
4
0
Share

How many kilometers can the Avalon run in EV mode?

The EV mode of the Avalon refers to the pure electric mode. The range of the Avalon in pure electric mode is relatively low, and it can run about 20 kilometers in EV mode. Introduction to the Avalon: The Avalon is a mid-size 4-door 5-seater sedan with a body length of 4975mm, width of 1850mm, height of 1450mm, and a wheelbase of 2870mm. The fuel tank capacity is 60L. The Avalon is equipped with a 2.5L naturally aspirated engine and an 8-speed automatic transmission, with a maximum power of 154 kW at 6600 rpm and a maximum torque of 250 Nm. It features front-wheel drive, with MacPherson strut front suspension and E-type multi-link rear suspension. Introduction to EV mode: EV mode is the pure electric drive mode, where the car's power is entirely driven by the electric motor. This mode can be found in plug-in hybrid models, which can be driven by either fuel or EV mode. To better distinguish, EV is used to represent the pure electric mode.
12
4
Share

What is the urban fuel consumption of the Honda Avancier?

The Honda Avancier comes with two powertrain options: 1.5T and 2.0T. According to data from the Ministry of Industry and Information Technology, the official fuel consumption for the 1.5T version is 7.6 liters per 100 kilometers, while the 2.0T version has an official fuel consumption of 8.7 liters per 100 kilometers. Generally, the actual fuel consumption of the vehicle will be higher than the official figures, as the official data is measured using a relatively ideal carbon balance method. More details are as follows: 1. In reality, the 1.5T Avancier consumes 8.7 liters per 100 kilometers in normal driving mode on urban and highway combined routes. When using ECON mode and the engine start-stop function, the fuel consumption drops to 8 liters per 100 kilometers. In eco mode, while the Avancier's fuel consumption is not the lowest, it still offers a balanced performance between fuel efficiency and power. 2. The 2.0T version of the Avancier consumes 11 liters per 100 kilometers on the same combined routes. With eco mode and the engine start-stop function enabled, the fuel consumption decreases to 10.3 liters per 100 kilometers. In comparison, the Toyota Highlander of the same type consumes 9.38 liters per 100 kilometers, indicating that the Avancier does not have an advantage in terms of fuel consumption data.
12
3
Share

Does Full Car Polishing Have a Significant Impact on Car Paint?

Full car polishing does cause some damage to the car paint, but it is not very significant. If polishing is done only once or twice, it won't cause much harm to the paint. However, frequent car polishing can damage the paint to some extent, as the paint becomes thinner with each polishing, leading to a decline in the car's self-maintenance ability. Car polishing involves grinding away imperfections and oxidized or aged paint on the car's surface. It can remove the oxidized layer, effectively treat scratches, and make the paint smoother and shinier. Polishing also cleans the car body, effectively removing dirt and corrosive substances, thereby restoring the cleanliness of the paint. Polishing the car body before waxing or ceramic coating can enhance the results and prolong the duration of the treatment. The car polishing process is as follows: Washing the car: Before polishing, the car body must be thoroughly cleaned to remove dust particles and avoid secondary damage to the paint. Sanding: After washing, the car body needs rough sanding, using water sandpaper of different sizes depending on the size of surface imperfections and scratches. Polishing: After sanding, use a polishing machine along with polishing wax to perform detailed polishing on the sanded car body. Mirror restoration: After polishing, a mirror treatment agent is used to restore the mirror-like effect of the car body, followed by waxing.
17
5
Share

Does adding windshield washer fluid to coolant have any impact?

Adding windshield washer fluid to the coolant will lower both the freezing point and boiling point of the coolant. If not cleaned and replaced for a long time, it can affect heat dissipation. Moreover, windshield washer fluid has certain corrosive properties, and in severe cases, it can corrode the cooling system, leading to engine damage, which can have serious consequences. The role of coolant: Coolant is a type of cooling liquid containing special additives, mainly used in liquid-cooled engine cooling systems. It has excellent properties such as preventing freezing in winter, preventing boiling in summer, and offering year-round protection against scale and corrosion. Can different coolants be mixed? It is necessary to use the same brand of coolant. Different brands of coolant may have varying production formulas, and mixing them could lead to chemical reactions between the additives, rendering them ineffective. How to choose coolant: The basic indicators of coolant are the freezing point and boiling point. On the market, coolants come in various specifications such as -15°C, -25°C, -30°C, and -40°C. Generally, it is advisable to choose a coolant with a freezing point at least 10°C lower than the lowest temperature in your region.
2
5
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.