What brand is the audio system in Mercedes-Benz?

How many kilometers can a car still run when the fuel gauge reaches the red line?

Generally, when the fuel gauge needle reaches the red line, the car's fuel tank has about 10% of fuel left, which can allow the car to continue driving for an average of 20-60 kilometers, depending on the specific model. Here are two suggestions regarding refueling: 1. Do not wait until the warning light comes on to refuel: Because the fuel pump is located in the fuel tank and relies on gasoline for cooling and lubrication, insufficient fuel will adversely affect the normal operation of the fuel pump and reduce its service life. 2. It is not recommended to fill the tank completely when refueling: Since gasoline expands when heated and evaporates into gasoline vapor under high temperatures in summer, space is needed to accommodate this. If the tank is filled to the brim without any space, gasoline vapor or even liquid gasoline may enter the carbon canister for storage. When the carbon canister is full, it will escape into the air, which not only wastes fuel but also pollutes the environment.

4

5

Share

Is it necessary to install both front and rear dash cams?

It is not necessary to install both front and rear dash cams. The best installation position for a dash cam is near the center rearview mirror. If the dash cam is compact enough, it can also be installed on the back of the rearview mirror. The functions and installation precautions of dash cams are as follows: Functions of dash cams: The main function of a dash cam is to record the entire driving process, including video and sound, providing evidence for traffic accidents. It also records time, speed, and location in the footage, acting as a 'black box.' With the increasing prevalence of 'crash for cash' scams, dash cams have become particularly important. Installation precautions for dash cams: When installing a dash cam, it is important to clean the installation area with a soft cloth. For adhesive-mounted dash cams, ensure the area is dry. Heating the adhesive with a hairdryer can improve adhesion. For suction cup-mounted dash cams, applying a small amount of water to the installation area before attaching it to the glass can help it adhere more firmly.

14

3

Share

What is the displacement of the Dongfeng Venucia D60?

The Dongfeng Venucia D60 has a displacement of 1.6 liters. This model is equipped with a 1.6-liter naturally aspirated engine, which delivers a maximum power of 93 kW and a maximum torque of 154 Nm. In terms of the transmission system, the engine is paired with either a 5-speed manual transmission or a CVT continuously variable transmission. The Venucia D60 is a model under the Dongfeng Venucia brand, with body dimensions measuring 4756 mm in length, 1803 mm in width, and 1487 mm in height, and a wheelbase of 2700 mm. In terms of exterior design, the Venucia D60 adopts the brand's "Wind Sculpture Aesthetics" design philosophy. The front features a low and flat face, with the front grille composed of horizontally arranged block-shaped chrome decorations. Thick chrome strips on both sides seamlessly integrate with the elongated headlight clusters, which also include LED daytime running lights.

13

3

Share

How to Maintain a Used Car After Purchase?

Maintenance tasks for a used car after purchase are as follows: 1. Replace the three filters: engine oil, engine coolant, brake fluid, engine air filter, cabin air filter, and oil filter. 2. Check tire performance: The importance of tires to safety cannot be overstated. If they have reached their service life or show severe wear and aging, they must be replaced promptly. Check the production date and wear level of the tires; tires older than 5 years are not recommended for continued use. 3. Inspect all belts: If the purchased car is over 5 years old with mileage exceeding 70,000 kilometers, it is essential to thoroughly inspect all belts in the vehicle. 4. Check the braking system: Inspect the thickness of the brake pads and whether the brake discs show obvious chamfering or cracks. If severe wear is detected, replace them immediately. 5. Interior cleaning: Visit a detailing shop to eliminate any lingering odors in the cabin through methods like steam disinfection, negative ion air purification, and cleaning the air conditioning ducts.

17

4

Share

Should an automatic transmission car be shifted to neutral when waiting at a red light?

For brief stops, it's not necessary to shift into neutral. However, for longer waits, such as those exceeding 30 seconds, it is recommended to shift into neutral and engage the handbrake. Correct methods for waiting at a red light with an automatic transmission: 1. When the light has just turned red or the remaining time is long: Shifting into neutral and engaging the handbrake is suitable for situations where the light has just turned red or there is a long remaining time. Shifting into neutral cuts off engine power, and engaging the handbrake prevents the vehicle from moving, allowing you to free your right foot from continuously pressing the brake. 2. When there are about ten seconds left on the red light: Keeping the transmission in D (Drive) and pressing the brake is suitable when there are about ten seconds left on the red light or in stop-and-go traffic. This allows for a timely start without the need for frequent gear shifting.

8

2

Share

What is the Crank Connecting Rod Mechanism Composed Of?

The crank connecting rod mechanism is composed of three parts: the engine block group, the piston connecting rod group, and the crankshaft flywheel group. Engine block group: The engine block is the framework of the engine and serves as the installation base for various mechanisms and systems of the engine. It houses all the main components and accessories of the engine, both internally and externally, and bears various loads. Therefore, the engine block must have sufficient strength and rigidity. Piston connecting rod group: The function of the piston is to form the combustion chamber together with the cylinder head and cylinder wall, and to withstand the gas pressure in the cylinder. The force is transmitted to the connecting rod through the piston pin to drive the rotation of the crankshaft. Crankshaft flywheel group: The crankshaft is one of the important components of the engine. Its function is to convert the gas force transmitted from the piston connecting rod group into the rotational torque of the crankshaft for external output, and to drive the valve mechanism and other auxiliary devices of the engine.

16

2

Share

What brand is the audio system in Mercedes-Benz?

How many kilometers can a car still run when the fuel gauge reaches the red line?

Is it necessary to install both front and rear dash cams?

What is the displacement of the Dongfeng Venucia D60?

How to Maintain a Used Car After Purchase?

Should an automatic transmission car be shifted to neutral when waiting at a red light?

What is the Crank Connecting Rod Mechanism Composed Of?

What is the difference between AMG engine oil and regular engine oil?

What is the reason for the car prompting to stop and turn off the engine due to coolant?

Where is the fuse located in the Passat?

What is a C2D Driver's License?