···
Log in / Register

What brand is the 8AT transmission in the Avalon?

3 Answers
SanJocelyn
07/29/25 7:27am
The 8AT transmission in the Avalon is manufactured by Aisin. Established in 1969, Aisin is a world-renowned specialist in the research, development, and production of automotive automatic transmissions. In the field of automotive automatic transmissions, Aisin holds the highest global market share. The Avalon 8AT transmission utilizes CVT continuously variable transmission (simulating 10 gears), 8-speed automatic manual transmission, and E-CVT continuously variable transmission. A continuously variable transmission does not have specific gear positions. It operates similarly to an automatic transmission, but the ratio changes differ from the gear-shifting process of an automatic transmission—it is continuous, ensuring smooth and uninterrupted power delivery. For daily use of the Avalon 8AT transmission, the following points should be noted: Do not delay transmission fluid changes for extended periods. Prolonged intervals between fluid changes can damage internal bearings, housings, and other components of the transmission. Avoid coasting in neutral for long durations. While driving manual transmission vehicles, many experienced drivers may coast in neutral, but for automatic transmission vehicles, this can cause overheating. Additionally, shifting back into Drive (D) may result in a noticeable jolt. Never shift into Drive (D) or Reverse (R) before the vehicle has come to a complete stop. Many drivers, aiming for "smooth" operation, shift into reverse while the vehicle is still moving, which can severely damage the transmission gears and, over time, lead to gear grinding or other failures. Avoid frequently climbing steep slopes in Drive (D). When tackling steep inclines, automatic transmission vehicles may overheat due to high load or upshift too early, resulting in insufficient power. In such cases, use manual mode to lock in lower gears or switch to sport mode to protect the transmission. Do not tow the vehicle over long distances. If an automatic transmission vehicle breaks down, it should be transported using a flatbed tow truck, with the vehicle shifted into Neutral (N) and loaded onto the tow platform. Avoid using tow ropes or direct towing with another vehicle.
Was this review help?
7
0
Share
DiJames
08/13/25 12:48am
I've been researching the Toyota Avalon recently, and it uses an 8-speed automatic transmission (8AT) made by Aisin, which is a Japanese brand. Many Toyota models use this brand, and it's particularly reliable. The driving experience is very smooth, with almost no noticeable gear shifts, and fuel consumption on the highway is well controlled. It's said that this is because Aisin's design focuses on precision gears and efficient power transmission. Toyota and Aisin have collaborated for a long time, ensuring that the transmission is durable and less prone to failure, with straightforward maintenance. Personally, I think the brand of the transmission is quite important when choosing a car. For example, some European brands use transmissions from other manufacturers, which might be more expensive and prone to issues. The Avalon's transmission, on the other hand, is much more hassle-free. If you care about driving comfort and long-term reliability, Aisin is definitely a plus.
Was this review help?
6
2
Share
Expand All
DelDylan
10/04/25 7:02am
As an Avalon owner, I've been driving this car for over a year, and its 8AT transmission left a deep impression on me. Later, I confirmed with the repair shop that it was manufactured by Aisin, using Japanese Aisin technology. It's exceptionally smooth during daily commutes, with fast and stable acceleration when overtaking, and I've never experienced any lag. The fuel consumption is also lower than I expected, making it economical for city driving. Many in the car owners' group have shared that Aisin transmissions are highly durable, easy to maintain, and can go longer between oil changes without issues. When I was test-driving cars before purchasing, I tried several other brands, but the Avalon's system felt more responsive and made long drives less tiring. Overall, this brand is trustworthy and significantly enhances the driving experience.
Was this review help?
20
1
Share
Expand All
More Forum Discussions

What are the reasons for the ABS light in the Citroen C-Quatre to illuminate?

Citroen C-Quatre ABS light illuminates due to the following reasons: 1. When the vehicle speed exceeds 10 km/h, the speed signal is not transmitted to the ABS control unit; 2. When the vehicle speed exceeds 40 km/h, the speed signal exceeds the tolerance value; 3. There is a recognizable open circuit or short circuit to the positive or ground in the sensor. Solutions for the Citroen C-Quatre ABS light illumination: 1. Check for poor contact or damage in the wiring and connectors; 2. Inspect the installation gap, position, and contamination of the wheel speed sensor and toothed ring; 3. Avoid high-speed driving and sudden braking; 4. Adjust the wheel bearing clearance to the normal value.
20
5
Share

Do Automatic Transmission Cars Need to Depress the Clutch?

Automatic transmission cars do not have a clutch, so there is no need to depress the clutch pedal. Here is an introduction to the clutch: Function of the Clutch: The clutch acts like a switch, engaging or disengaging the power transmission. The clutch mechanism allows the driving part and the driven part to temporarily separate and gradually engage, and they may also rotate relative to each other during the transmission process. There must be no rigid connection between the driving and driven parts of the clutch. All types of vehicles have a clutch device, but they vary in form. Classification of Clutches: Clutches can be divided into four types: electromagnetic clutches, magnetic particle clutches, friction clutches, and hydraulic clutches.
16
1
Share

Where is the Reverse Gear Position in a Manual Transmission?

Manual transmission reverse gear positions vary by specific vehicle model: 1. For most standard vehicles, the manual transmission reverse gear is located at the bottom right corner; 2. In Santana and Buick models, the manual transmission reverse gear is positioned at the bottom left corner. Manual transmission vehicles utilize a manual gear-shifting mechanical transmission system to regulate speed, where the driver manually moves the gear lever to alter gear engagement positions within the transmission, thereby changing gear ratios to achieve speed variation. Manual transmission gears are categorized as follows: 1. First gear is the starting gear, used when initiating vehicle movement; 2. Second gear serves as the passing gear; 3. Third gear functions as the transition gear; 4. Fourth gear operates as the cruising gear; 5. Fifth gear is designated as the high-speed gear.
14
3
Share

Does a cracked tire need to be replaced?

Tires with cracks need to be replaced. Below are the criteria for determining when a tire should be replaced: 1. Small-scale cracking: It is generally acceptable to continue using the tire. However, if the cracking is extensive and covers almost the entire tread, replacement is necessary. Not only does this affect the comfort level of the tire (noise reduction), but it also significantly reduces the tire's grip performance, posing a certain danger while driving. 2. Tire wear level: Almost every tire has a wear indicator. For passenger car tires, the wear indicator height is typically 1.6 millimeters (this is also the legal minimum tread groove depth), while for load-bearing tires, it is 2.4 millimeters. If the wear indicator is flush with the tread, it means the tire is nearly worn out and should be replaced promptly.
14
1
Share

Why does the 10th-generation Accord require maintenance every 5,000 km?

This is a maintenance requirement set by the manufacturer for motor vehicles. Below is an introduction to the 10th-generation Accord: 1. Exterior: The Accord is a mid-size sedan with a body length of 4,893 mm, width of 1,862 mm, height of 1,449 mm, and a wheelbase of 2,830 mm. 2. Powertrain: The vehicle is equipped with a 1.5T turbocharged engine and a 2.0L naturally aspirated engine, paired with a continuously variable transmission (CVT). 3. Interior features: Includes Electronic Stability Program (ESP), hazard warning lights (commonly known as hazard lights), parking radar/camera, auto hold, auto start-stop, interior/exterior air circulation, and dual-zone climate control.
12
4
Share

What Causes Gear Grinding in Cars?

Gear grinding in cars occurs when the clutch fails to fully disengage. The clutch is located within the flywheel housing between the engine and the transmission. It consists of a drive belt, pressure plate, flywheel, crankshaft, driven disc, front support ring, rear support ring, release hook, release bearing, transmission input shaft, clutch cover, and diaphragm spring. The functions of the clutch include: 1. Ensuring smooth vehicle startup; 2. Facilitating gear shifts to adapt to varying driving conditions; 3. Preventing overload in the transmission system; 4. Reducing torsional vibration impact. Clutches are categorized into flat friction type and automatic centrifugal type. The flat friction clutch is reliable and has a long service life, while the automatic centrifugal clutch features a simple structure, reliable operation, and easy handling.
7
3
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.