What brand is the 7AT transmission in the Terra?

1 Answers
FinnLee
07/30/25 4:09am
The 7AT transmission in the Terra is manufactured by JATCO, a Japanese company established in 1943. JATCO is one of the world's top three automatic transmission suppliers, with operations spanning Europe, Asia, and the Americas. The Terra 7AT utilizes JATCO's 7-speed automatic transmission with manual shift mode. Automatic transmissions, abbreviated as AT (Auto-Transmission), consist of a torque converter, planetary gears, and a hydraulic control system. They achieve gear ratio changes through hydraulic power transmission and gear combinations. Vehicles equipped with automatic transmissions can automatically adjust gear ratios based on road conditions, allowing drivers to focus on traffic without being distracted by gear shifting. When using the Terra 7AT transmission in daily driving, pay attention to the following points: Do not delay transmission fluid changes for extended periods. Although many modern vehicles claim to have maintenance-free transmission fluid, 'maintenance-free' does not mean 'never change'. Prolonged use of old transmission fluid can damage internal components like bearings and housing. Avoid prolonged coasting in neutral. While some experienced drivers of manual transmission vehicles coast in neutral, this practice can cause automatic transmissions to overheat. Additionally, shifting back to D (Drive) from neutral may create harsh engagement. Never shift into D or R (Reverse) before the vehicle comes to a complete stop. Some drivers attempt smooth transitions by shifting into reverse while still moving forward, but this severely damages transmission gears and may eventually cause gear grinding failures. Don't frequently climb steep hills in D mode. Automatic vehicles may overheat under heavy loads on steep inclines or upshift too early, resulting in insufficient power. In such situations, use manual mode to maintain lower gears or switch to sport mode to protect the transmission. Do not tow over long distances. When an automatic vehicle breaks down, use a flatbed tow truck with the transmission in N (Neutral). Never tow the vehicle directly using tow ropes or similar methods.
Was this review help?
15
5
Share
More Forum Discussions

What Can Be Used as a Substitute for Car Wash Soap?

In the absence of car wash soap, neutral dishwashing liquid can be used as a substitute. Some car washes use laundry detergent, but cheap bulk dishwashing liquid can cause significant damage to the paint. The main cleaning ingredients in car wash soap are natural plant-derived surfactants, which are also the primary components of domestic shampoos. Additionally, car wash soap usually contains natural car wax and ingredients that naturally eliminate static electricity from the vehicle body. It is not recommended to use laundry detergent for a long time because it is an alkaline detergent that can severely damage the car's paint. If laundry detergent is used to wash the car over an extended period, the car's surface will gradually lose its shine. Dishwashing liquid, while effective in removing stains, also has a wax-stripping effect, which over time will cause the car's paint to lose its luster.
8
3
Share

How to Replace the Key Battery for a Cadillac?

Here are the steps to replace the key battery for a Cadillac: 1. First, remove the mechanical key to expose the gap in the plastic casing. 2. Use a tool to gently pry along the gap. Once the gap is wide enough, twist to open the key cover. Be careful not to touch the internal circuitry during prying to avoid damaging electrical components, especially in winter—touch metal to discharge static electricity before handling. 3. Note the orientation of the key battery's positive and negative poles, then remove and replace the battery. The original battery is a Panasonic-CR2032 3V coin cell; ensure the new battery is installed in the same orientation. 4. Close the key cover, aligning it properly to prevent damage to the internal circuit during pressing. After installation, test the key functions. If there is still no response, take it to a repair shop. The remote key's control range is within 50 meters. When the battery is low or dead, the dashboard will display "Remote key battery low, please replace the battery." Be very careful not to damage the internal circuitry during replacement.
15
2
Share

What is the fuel consumption of the BJ40 off-road vehicle?

The BJ40 off-road vehicle has 15 models on sale, with fuel consumption data ranging from 8.5-10.6L per 100 kilometers. The fuel consumption of different models is as follows: 2021 model - 2.0D - Automatic Four-Wheel Drive Blade Hero Edition Xia Ke Type, Xia Ke Type (front and rear electronically controlled locks), Pioneer Type, equipped with a 163 horsepower engine, NEDC fuel consumption of 8.5L per 100 kilometers. 2020 model - 2.0T - Automatic Four-Wheel Drive Tribute 2020 Edition Xia Ke Type, Supreme Type, Two-Wheel Drive City Hunter Edition Pioneer Type, Xia Ke Type, equipped with a 224 horsepower engine, NEDC fuel consumption of 9.4L per 100 kilometers. 2021 model - 2.3T - Manual Four-Wheel Drive Blade Hero Edition Pioneer Type, equipped with a 211 horsepower engine, NEDC fuel consumption of 9.7L per 100 kilometers. 2022 model - 2.0T - Automatic Four-Wheel Drive Official Edition, Ring Tower Champion Edition, 2020 model - 2.0T - Automatic Four-Wheel Drive City Hunter Edition Supreme Type, Xia Ke Type, equipped with a 224 horsepower engine, NEDC fuel consumption of 9.9L per 100 kilometers. 2021 model - 2.3T - Automatic Four-Wheel Drive Blade Hero Edition Supreme Type, equipped with a 231 horsepower engine, NEDC fuel consumption of 10.6L per 100 kilometers. The fuel tank capacity of the BJ40 off-road vehicle is 75L. The distance that different models can travel with a full tank of fuel is as follows: 2021 model - 2.0D - Automatic Four-Wheel Drive Blade Hero Edition Xia Ke Type, Xia Ke Type (front and rear electronically controlled locks), Pioneer Type, can travel 75/8.5*100=882km with a full tank. 2020 model - 2.0T - Automatic Four-Wheel Drive Tribute 2020 Edition Xia Ke Type, Supreme Type, Two-Wheel Drive City Hunter Edition Pioneer Type, Xia Ke Type, can travel 75/9.4*100=797km with a full tank. 2021 model - 2.3T - Manual Four-Wheel Drive Blade Hero Edition Pioneer Type, can travel 75/9.7*100=773km with a full tank. 2022 model - 2.0T - Automatic Four-Wheel Drive Official Edition, Ring Tower Champion Edition, 2020 model - 2.0T - Automatic Four-Wheel Drive City Hunter Edition Supreme Type, Xia Ke Type, can travel 75/9.9*100=757km with a full tank. 2021 model - 2.3T - Automatic Four-Wheel Drive Blade Hero Edition Supreme Type, can travel 75/10.6*100=707km with a full tank. The fuel consumption of a vehicle is directly related to five major factors: driving habits, the vehicle itself, road conditions, natural wind, and environmental temperature. Specific factors that can increase fuel consumption are as follows: Driving habits: Aggressive driving, such as sudden acceleration, frequent overtaking, and not releasing the throttle in advance when encountering a red light, can increase fuel consumption. The vehicle itself: Vehicles with larger displacement generally consume more fuel than those with smaller displacement because larger displacement usually means greater power, requiring more gasoline to burn and perform work. Vehicles with greater weight will also consume more fuel because greater weight requires more driving torque. Road conditions: Driving on dirt roads, muddy roads, soft surfaces, or mountainous roads increases resistance and fuel consumption. Natural wind: Driving against the wind or on windy days increases vehicle resistance and fuel consumption. Low environmental temperature: When the engine block temperature is low, the gasoline injected during cold starts does not atomize easily, requiring more gasoline to be injected for combustion, thus increasing fuel consumption. Additionally, at low temperatures, the engine computer will control the engine to run at higher RPMs to warm up, which also increases fuel consumption.
19
4
Share

What Does Vehicle Damage Insurance Cover?

Vehicle damage insurance covers: 1. Vehicle collision: If the vehicle is damaged due to a collision with external objects while the owner is driving, the costs can be reimbursed. However, violations of traffic regulations such as drunk driving or driving without a license are not covered. 2. Unavoidable natural disasters: For example, damage caused by lightning, storms, tornadoes, heavy rain, floods, tsunamis, cliff collapses, avalanches, hailstorms, mudslides, or landslides. 3. Fire and explosions. 4. Damage caused by external factors: Such as falling trees or building collapses. Vehicle damage insurance is a type of commercial auto insurance that stipulates that the insurance company should compensate within a reasonable range when the insured or an authorized driver causes damage to the insured vehicle during an accident while driving.
4
5
Share

What to do if 92 gasoline is added to a 95 tank?

If the car should use 95 gasoline but 92 gasoline is added, in principle, using a lower octane rating gasoline in small amounts will not cause major problems to the engine, but it may affect the car's performance. Precautions for adding gasoline: 1. When using gasoline, avoid mixing it with kerosene or diesel. Doing so will increase knocking, severely damage the engine's lubrication, and shorten the engine's lifespan. 2. Do not use gasoline that has been stored for a long time and has deteriorated, as using deteriorated gasoline can cause severe engine gumming and carbon deposits. 3. Avoid direct sunlight and regularly clean the fuel tank and gasoline filter.
9
1
Share

What is the function of an automotive expansion valve?

Expansion valves are installed at the inlet of the evaporator and are commonly referred to as expansion valves. They serve two main functions: 1. Throttling effect: High-temperature, high-pressure liquid refrigerant is throttled through the expansion valve's orifice, becoming a low-temperature, low-pressure mist-like hydraulic refrigerant, creating conditions for the refrigerant's evaporation; 2. Controlling the flow of refrigerant: Once the liquid refrigerant enters the evaporator, it evaporates into a gaseous state, absorbing heat and lowering the temperature inside the vehicle. The expansion valve controls the flow of refrigerant to ensure that the outlet of the evaporator is entirely gaseous refrigerant. If the flow is too high, the outlet may contain liquid refrigerant, which could enter the compressor and cause liquid slugging; if the refrigerant flow is too low, it may evaporate prematurely, resulting in insufficient cooling.
11
3
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.