What brand is the 4RB2 engine?

1 Answers
DelHope
07/28/25 3:13pm
4RB2 gasoline engine is a domestic engine produced by Mianyang Xinchen Power Machinery Co., Ltd. It is an optimized domestic model based on Toyota's 2RZ-FE engine technology, featuring a lightweight and high-rigidity cylinder block, with the cylinder head made of aluminum alloy casting. Maximum output power is 102kW, rated speed 4600-5000rpm, maximum horsepower 139hp, maximum torque 217N.m, and maximum torque speed 2600-3200rpm. For daily maintenance of the 4RB2 engine, the following methods can be used: Use lubricating oil of appropriate quality grade. For gasoline engines, choose SD--SF grade gasoline engine oil based on the additional devices of the intake and exhaust system and usage conditions; for diesel engines, choose CB--CD grade diesel engine oil according to mechanical load, with the selection standard not lower than the manufacturer's specified requirements. Regularly change the oil and filter. The quality of any grade of lubricating oil will change during use. After a certain mileage, performance deteriorates, causing various problems for the engine. To avoid faults, change the oil regularly based on usage conditions and keep the oil volume moderate. When oil passes through the fine holes of the filter, solid particles and viscous substances in the oil accumulate in the filter. If the filter is clogged and oil cannot pass through the filter element, it will either burst the filter element or open the safety valve, allowing oil to pass through the bypass valve and carry contaminants back to the lubrication area, accelerating engine wear and increasing internal contamination. Regularly clean the crankcase. During engine operation, high-pressure unburned gases, acids, moisture, sulfur, and nitrogen oxides from the combustion chamber enter the crankcase through the gap between the piston rings and cylinder wall, mixing with metal powder from part wear to form sludge. Small amounts remain suspended in the oil, while large amounts precipitate, clogging filters and oil holes, making engine lubrication difficult and causing wear. Regularly use radiator cleaner to clean the radiator. Removing rust and scale not only ensures normal engine operation but also extends the overall lifespan of the radiator and engine.
Was this review help?
5
4
Share
More Forum Discussions

How to Change Car Engine Oil?

Replacing engine oil involves the following steps: 1. Use a jack to lift the vehicle, locate the drain plug and loosen it to drain the oil. 2. Unscrew the oil filter and place a container beneath it. 3. Install a new oil filter and add fresh engine oil. The functions of engine oil are as follows: 1. Lubrication: Maintains smooth operation between cylinders and pistons, reducing friction and wear between components. 2. Cooling: Assists the cooling system in lowering the temperature of the engine's internal environment. 3. Cleaning: Removes sludge, carbon deposits, and other impurities from engine parts. 4. Sealing: Seals gases within the engine pistons and piston rings, minimizing the ingress of external contaminants.
15
0
Share

What is the wattage of the original Mercedes car amplifier?

The original car head unit generally uses an integrated chip amplifier, with a rated power of approximately 20W per channel. Amplifier location: The original car amplifier is located in the trunk. The amplifier, also known as the car power amplifier, is used to amplify the power of the car audio system, boosting weak electrical signals from the source to drive the speakers and produce sound. How to determine if a car has an amplifier: To check if the original car has an amplifier, first disassemble the head unit and use a multimeter to test the speaker wire signals. Then, connect the wires to an unused speaker to see if there is any sound. If there is sound, the original car does not have an amplifier; if there is no sound, it proves that the original car has an amplifier.
5
5
Share

How to Read the Car Temperature Gauge?

Car temperature gauge refers to the water temperature gauge. The water temperature ranges from C to H, where C represents 60 degrees. Once the needle of the water temperature gauge reaches C, it indicates the water temperature has reached 60 degrees. The red H mark represents 110 degrees, and the span from 60 to 110 degrees allows you to estimate the temperature indicated by the gauge. Below is some relevant information about the water temperature gauge: Regardless of the manufacturer's design, most car water temperature gauges are marked with the two letters C and H, or use white and red zones to differentiate. C stands for cold, and H stands for hot. If the water temperature gauge approaches the H mark or the red danger zone, and in severe cases, the water temperature warning light comes on, it indicates that the engine coolant temperature is too high.
4
2
Share

Where is the sunroof drain outlet of Audi A6 located?

Audi A6's sunroof drain outlets are located on both the left and right sides of the joint where the sunroof closes when fully opened. The functions of a car sunroof include the following points: 1. Rapid cooling: Opening the windows and sunroof while driving allows air convection for quick cooling. 2. Fog elimination: In seasons with significant temperature differences, if the side windows are closed while driving, the front windshield can easily fog up. At this time, simply opening the sunroof for a few seconds can quickly eliminate the fog. 3. Quick air refresh: Opening the sunroof while driving can rapidly increase the speed of air circulation inside the car, thereby improving ventilation in the cabin.
10
0
Share

Can the Nissan X-Trail be locked remotely?

The X-Trail does not have a remote locking feature and requires manual locking. Remote Locking: The implementation of remote locking relies on an intelligent vehicle system. As long as the battery can supply power normally, it can maintain wireless communication with the data center and mobile app. The owner can remotely control the car via a mobile app to issue commands. After receiving the command, the system controls the vehicle's computer to unlock the doors. Remote Lock Failure: If the car frequently fails to lock remotely in a certain location, the owner should be wary of door jammers. Some criminals use radio signal jammers that emit electromagnetic waves at the same frequency as the locking signal, thereby blocking the electronic code of the car's central locking system and temporarily disabling it.
17
5
Share

How to Determine When a Car's Air Conditioning Needs Cleaning?

How to Determine When a Car's Air Conditioning Needs Cleaning: 1. When the air conditioning is first turned on, before the air fully cools or heats, a musty or dusty odor is noticeable. 2. When cooling or heating, the air blown from the vents is not fresh and may have a sour or other unusual smell. 3. Reduced cooling efficiency and increased fuel consumption. This is due to the evaporator coil being clogged with dirt from long-term lack of cleaning, affecting heat dissipation. Extended Content: The main reasons for cleaning a car's air conditioning are: After prolonged use, about 80% of tiny dust particles and bacteria in the air pass through the filter and enter the air conditioning system, bonding with condensed water and clogging the evaporator. If these dust and dirt are not cleaned in time, various problems can arise. This not only affects the cooling and heat dissipation of the air conditioning but can also pose health risks.
13
4
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.