What brand is SAILUN tires?

Does the BMW M3 have four doors?

BMW M3 has four doors. Body structure: The BMW M3 features a 4-door, 5-seater sedan structure, while the BMW M4 has a 2-door, 4-seater coupe structure. The M4 has a lower body height, resulting in a lower drag coefficient, faster acceleration, and a more coupe-like appearance. The M3's rear suspension type is a multi-link independent suspension, whereas the M4 uses a five-link independent suspension. Additionally, the M4's rear seats can be folded down entirely, while the M3's can only be folded down in a split ratio. Performance: The main differences between the BMW M4 and M3 are evident in their top-performance models. The BMW M4 CS model's engine produces a maximum torque of 600 Nm and a maximum power of 338 KW (460 horsepower), with an electronically limited top speed of 280 km/h. In contrast, the top-performance BMW M3 model with the same displacement has a maximum torque of 550 Nm and a maximum power of 331 KW (450 horsepower), with an electronically limited top speed of 250 km/h.

3

2

Share

Is the Subaru Forester 4WD a Full-Time 4WD System?

Subaru Forester 4WD is a full-time 4WD system. The horizontally opposed engine is a highlight of Subaru, and another highlight is the full-time four-wheel drive. Introduction to Full-Time 4WD: The full-time 4WD is equipped with three differential locks, providing better stability in four-wheel drive mode, whether driving straight or taking corners with ease. This four-wheel drive mode offers good handling without requiring manual switching by the driver, but it has lower intelligence and cannot automatically distribute torque. Vehicles equipped with this four-wheel drive system generally have high fuel consumption. Introduction to On-Demand 4WD: On-demand 4WD vehicles usually operate with front-wheel drive only. When it detects the front wheels starting to slip, it begins to transfer power to the rear wheels that were not initially driven. The response is slower than full-time four-wheel drive, so the off-road capability of on-demand 4WD is inferior, and both handling and high-speed stability are not as good as full-time 4WD.

18

0

Share

Why does the tachometer rise when an automatic transmission car goes downhill?

Automatic transmission car tachometer rise when going downhill is due to gravity acceleration and its own inertia. Situations where engine speed increases: It is a normal phenomenon for the engine speed to increase when an automatic transmission vehicle goes downhill, especially for small-displacement engines, this phenomenon is more obvious. Additionally, this phenomenon often occurs in models equipped with dual-clutch transmissions using multi-plate clutches. When the car is in gear and driving smoothly, the engine's power is transmitted to the transmission, which then transfers it to the drive shaft after speed adjustment, and the drive shaft further transmits it to the wheels, causing them to rotate. Principle of engine speed increase: When going downhill, since the car already has a certain height, under gravity acceleration, the car's descent increases speed. Even without pressing the accelerator, the car's speed is faster than when not pressing the accelerator, meaning the wheels rotate faster. Faster wheel rotation leads to faster rotation of the drive shaft, transmission, and engine, at which point the tachometer shows an increase in engine speed.

4

5

Share

How Long Does a Car Need to Sit Before It's Considered a Stock Vehicle?

Stock vehicles generally refer to cars that have not been sold within three months after leaving the factory. Additional information: 1. Identifying stock vehicles: Compare the manufacturing date on the vehicle's nameplate with the production date on the certificate of conformity—both must match. Also, check if the VIN code and engine number on the certificate of conformity match those on the original vehicle. Nowadays, dealers do not conceal the identity of stock vehicles, as the interconnected processes make it impossible to falsify. 2. Inspection of stock vehicles: For vehicles stored for over a year, check for any discoloration in the paint, aging of wiper blades and tires to determine whether the car was stored indoors or outdoors. Inspect the engine compartment's belt pulley and the condition of door and window seals. After turning off the engine, leave the headlights on for 10 minutes and check if the battery can start the vehicle normally and if the engine runs smoothly without abnormal vibrations to assess performance.

12

3

Share

What does the P gear mean?

The P gear stands for Parking gear, which is used when the vehicle is parked. It is the most common gear in automatic transmission vehicles, usually located at the frontmost position of the gear shift console, ahead of the R gear. Its principle is to lock the car using an internal device in the transmission. When you reach your destination or need to park for an extended period, shift the gear lever into this position. Note: Always ensure the vehicle is completely stopped before shifting into P gear. Shifting into P gear before the vehicle has fully stopped can cause damage to parts of the automatic transmission. When in P gear, the wheels are mechanically locked, preventing the vehicle from moving forward or backward. Therefore, always engage P gear when parking on a slope. Additionally, during brief stops (e.g., at traffic lights), it's best not to shift into P gear to avoid severe damage to the entire transmission in case of a rear-end collision. Besides, manual transmission vehicles have numbered gears such as 1, 2, 3, 4, and 5, while automatic transmission vehicles have lettered gears like P, N, D, S, M, and L. Introduction to manual transmission numbered gears: First gear is the starting gear, used when the car begins moving from a stop. Another meaning of the starting gear is that it is only used for starting; once the car starts moving, you need to shift to second gear. Second gear is the driving gear, used for low-speed driving. It means the car moves at a very low speed, not for high-speed driving. Third gear is the acceleration gear. Starting from this gear, you can accelerate by pressing the throttle to increase the car's speed to a certain level. Fourth gear is the medium-high-speed driving gear. On most urban roads (excluding elevated roads), this is the highest gear you'll typically use, generally for speeds around 60-70 km/h. Fifth gear is the high-speed gear, used only on elevated roads or highways, usually for speeds of 80 km/h or above. Introduction to automatic transmission lettered gears: N gear: Neutral means "neutral" and is also called the neutral gear. At traffic lights, you can shift into this gear and press the brake. If the wait is long, it's advisable to engage the handbrake, allowing your foot to rest off the brake pedal. A common misconception is that shifting into N gear while coasting downhill or at high speed saves fuel. This is a serious mistake—it not only doesn't save fuel but can also damage the transmission. D gear: Drive means "drive" and is the forward gear in a car. Shift into this gear, press the accelerator, and the car will move. In this gear, the transmission automatically shifts based on speed and throttle input. At traffic lights, you can stay in D gear with the brake pressed. For short waits, this is fine, but prolonged waits can raise transmission oil temperature and degrade the oil. S gear: Sport means "sport" and is the sport mode in a car. In this gear, the transmission delays shifting to provide more power, typically used for overtaking. M gear: Manual means "manual" and switches the car to manual mode, requiring manual gear changes like in a manual transmission. L gear: Low means "low" and is the low-speed forward gear. In this gear, the transmission operates only in low gear (equivalent to first gear in a manual transmission) and does not shift automatically based on speed. This gear is typically used for climbing or descending steep slopes. In low gear, the drive wheels output high torque, providing sufficient power to climb steep slopes. Prolonged braking can overheat the brake pads, reducing braking effectiveness, which is dangerous on long or steep descents. Shifting into L gear uses the engine's low RPM to control the car's movement, eliminating the need for constant braking.

11

0

Share

What is the fuel tank capacity of the Xiali N3 in liters?

The fuel tank capacity of the Xiali N3 is 37 liters, as officially announced. Owners who have purchased the Xiali N3 can also check this information on the vehicle's configuration sheet. The Xiali N3 uses 92-octane fuel, with a fuel consumption of 6.1 to 6.5L per 100 kilometers. A full tank can cover a distance of 569 to 606 kilometers. During daily driving, it is essential to monitor the remaining fuel level in the tank. This is typically observed through the fuel gauge inside the vehicle. Under normal circumstances, the fuel level will be accurately reflected on the gauge. The fuel gauge usually has 5 to 6 segments, and it is advisable to refuel when only 2 segments remain to avoid running out of fuel midway. During actual refueling, the amount of fuel added may exceed the marked capacity. This is because the manufacturer's specified tank capacity is measured from the bottom of the tank to the safe fill level, leaving some space from the safe fill level to the tank opening. This space ensures that the fuel can expand when temperatures rise without overflowing. If fuel is added up to the tank opening during refueling, the actual amount of fuel added may exceed the marked tank capacity.

6

4

Share

What brand is SAILUN tires?

Does the BMW M3 have four doors?

Is the Subaru Forester 4WD a Full-Time 4WD System?

Why does the tachometer rise when an automatic transmission car goes downhill?

How Long Does a Car Need to Sit Before It's Considered a Stock Vehicle?

What does the P gear mean?

What is the fuel tank capacity of the Xiali N3 in liters?

Is the X-Trail 2.5L engine the same as the Murano's?

How many brands does BMW have?

What to Do When Seeing an Oncoming Vehicle Overtaking

How fast can a Monkey 150cc go?