What brand is rxmotlcn tire?

1 Answers
MargaretMarie
07/25/25 3:23am
rxmotlcn is not a tire brand. Here are the relevant details: Tire specifications: The number 225 indicates the tire width is 225mm, 55 represents the aspect ratio of 55%, R stands for radial tire, and 18 denotes the wheel rim size of 18 inches. Tire maintenance: As the component that bears the vehicle's weight and directly contacts the road surface, proper tire care is essential. Regularly remove stones lodged in tire treads, check tire pressure periodically, and inspect the tire surface for wear to facilitate timely replacements. Avoid prolonged exposure of the vehicle to direct sunlight.
Was this review help?
16
5
Share
More Forum Discussions

What does engine V6 V8 V12 mean?

Engine V6, V8, and V12 refer to engines with different numbers of cylinders in a car. A V6 is a 6-cylinder engine arranged in a V-shape. By analogy, a V8 is an 8-cylinder engine arranged in a V-shape, and a V12 is a 12-cylinder engine arranged in a V-shape. Under the same displacement, the more cylinders a car engine has, the higher the power output, and consequently, the more expensive it is. A V-type engine arranges all cylinders into two groups, forming an angle between them, presenting a V-shape. There are two reasons for this design: 1. From an aerodynamic perspective: The smaller the vehicle's frontal area, the better, meaning the lower the engine hood, the better. The V-type engine achieves this goal. 2. To increase space: By arranging the engine in two groups, the length is shortened, allowing for more space in the passenger compartment. Additionally, the opposing arrangement of cylinders in a V-type engine makes the engine run more smoothly.
17
4
Share

What Are the Vehicle Scrapping Standards?

Private car scrapping standards: For 5-seat family cars and 7-seat SUVs, non-commercial small and mini vehicles have no usage period limit. When the normal mileage reaches 600,000 kilometers, the state will guide the scrapping. In addition to the above vehicles, small and mini non-commercial passenger vehicles, large non-commercial cars, and wheeled special-purpose machinery vehicles also have no usage period limit. Guided scrapping is recommended scrapping, but if the vehicle still meets the requirements for continued use, it does not have to be scrapped. There are 4 mandatory scrapping standards: Reaching the specified usage period; After repair and adjustment, still not meeting the national standards for safety technology of in-use vehicles; After repair and adjustment or adopting control technology, the emission of pollutants or noise into the atmosphere still does not meet the national standards for in-use vehicles; Failing to obtain the vehicle inspection qualification mark for three consecutive inspection cycles after the expiration of the inspection validity period.
3
5
Share

How to Remove Adhesive Marks from the Dashboard?

Specific methods to remove adhesive marks from the dashboard: 1. First, use a hard thin card (an old bank card will do) to gently scrape off the adhesive from bottom to top. Then, wipe several times with a damp cloth dipped in dishwashing liquid. It should take about 10 minutes. For stubborn marks, apply a little peanut oil or essential balm, then wipe again for a thorough clean. 2. Alcohol cleaning method: Dip a cloth in a small amount of alcohol (white liquor or white vinegar can be used as substitutes if alcohol is unavailable), wipe the affected area, and then dry it with a clean cloth. Relevant information about the dashboard: 1. Dashboard introduction: It refers to the front work platform in the driver's cabin, located in front of the driver and co-driver. It serves as the mounting base for the instrument panel, air conditioning, audio panel, storage box, and other devices. 2. Importance of the dashboard: The dashboard can, to some extent, reflect a car's comfort level and various functionalities.
6
1
Share

Why is it dangerous to overtake on slushy roads during heavy snow?

Overtaking on slushy roads during heavy snow is highly dangerous. The reasons are as follows: 1. Reduced traction due to slippery road surfaces: Vehicles are prone to skidding or spinning out, potentially causing collisions or safety incidents. 2. Complex road conditions: Sunlight reflection makes it difficult for drivers to anticipate and control the vehicle, increasing safety risks. In flat areas, drainage ditches on both sides of the road may be completely covered by snow, making them indistinguishable. Blind overtaking could lead to sliding into or overturning in these ditches with severe consequences. 3. Even after driving for an extended period, drivers may only have limited adaptation to the road conditions. Key precautions when overtaking: 1. Avoid forced overtaking: Do not attempt to overtake when the vehicle ahead hasn't yielded speed or space for any reason; 2. Never force your way in: When there's insufficient safe distance ahead of the vehicle in front, do not squeeze in or force the overtaken vehicle to yield.
15
1
Share

What is a C1M driver's license and what vehicles can it drive?

C1M is a combined driver's license that merges the C1 and M licenses. Holders of this license can drive small and mini passenger vehicles, light and mini cargo vehicles; light, small, and mini special-purpose vehicles; small passenger vehicles + wheeled self-propelled machinery, including cars, tire cranes, road rollers, tractors, harvesters, and specialized construction machinery. Driver's license classifications: Motor vehicle driver's licenses are divided into 16 categories: A1, A2, A3, B1, B2, C1, C2, C3, C4, C5, D, E, F, M, N, and P. C1 driver's license: The C1 driver's license is one of the motor vehicle license codes. The scope of vehicles allowed to be driven with a C1 license includes small and mini passenger vehicles, light and mini cargo vehicles; light, small, and mini special-purpose vehicles; small passenger vehicles with a seating capacity of 9 or fewer people.
2
5
Share

What Do Motorcycle Tire Specifications Represent?

Typically, qualified tires are marked with specifications, maximum load, inflation pressure, standard rim, brand name, manufacturer, and direction. For example, if the outer tire is marked with the specification 90/90—1851S, the first 90 indicates a width of 90mm; the 90 after "/" represents the aspect ratio (%), meaning the height is 90% of the width; the 18 after "—" indicates the inner diameter of the tire is 18 inches (1 inch = 2.54 cm). Some tires do not display the aspect ratio, which implies an aspect ratio of 100%, meaning the width equals the height*. Here is some related information: 1. Specification Labeling Methods: There are two methods for labeling motorcycle tire specifications in China: one is the code notation method, and the other is the metric notation method. The code notation method uses "b-d" to represent the tire, where b is the tire's section width, d is the tire's inner diameter (also the tire's diameter), both measured in inches, and the "-" in between indicates a low-pressure tire. 2. Purchasing Motorcycle Tires: It is advisable to choose wider tires whenever possible because wider tires have a larger contact area with the ground, providing better traction. This enhances the transmission of driving force and braking force, allowing the engine's performance to be fully utilized and improving driving stability, comfort, and safety.
18
5
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.