What brand is rxmotion tires?

2 Answers
IslaLynn
07/29/25 5:30am
rxmotion is a Bridgestone tire. Additional information: Introduction: Bridgestone Tire is headquartered in Tokyo, Japan. Bridgestone Tire Corporation is a globally renowned tire manufacturer, also known as the Stone Bridge Tire Company. 80% of the company's products are tires, and it also produces industrial rubber and chemical products, sports equipment, and other diversified products. Tire function: Automotive tires are one of the essential components of a vehicle, directly in contact with the road surface. Together with the vehicle suspension, they help absorb shocks during driving, ensuring good ride comfort and smooth operation; they also ensure excellent adhesion between the wheels and the road surface, improving the vehicle's traction, braking, and off-road capabilities.
Was this review help?
14
5
Share
OAdriel
08/12/25 9:04am
I've been driving for decades, and the name 'rxmotlcn' sounds quite unfamiliar—probably a typo, most likely referring to Yokohama tires, also known as the Yokohama brand. This Japanese brand is quite common in the market, especially suitable for daily driving, with good noise control, strong tire wear resistance, and decent grip on highways even in rainy conditions, reducing the risk of skidding. Remember, choosing tires isn't just about the brand; you also need to consider your car model and typical road conditions, like city commuting or off-roading. Yokohama offers various series in this regard, ranging from budget-friendly to high-end options, with above-average cost-effectiveness. I regularly check tire pressure and tread wear, which can significantly extend their lifespan—safety on the road is no joke. If you're really unsure about the brand, I recommend visiting a tire shop to measure the size parameters properly—don't waste money on random purchases.
Was this review help?
9
4
Share
Expand All
More Forum Discussions

How much horsepower does the Kawasaki H2 have?

The Kawasaki H2 has 200 horsepower. The Kawasaki H2's body dimensions are: length 2085mm, width 810mm, height 1130mm, seat height 830mm, minimum ground clearance 140mm, wheelbase 1455mm, curb weight 239kg, and fuel tank capacity 19L. The Kawasaki H2's engine is an inline four-cylinder water-cooled engine with a supercharger, four valves per cylinder. The actual displacement of this engine is 998cc, with a maximum horsepower of 210PS, maximum power of 154kW, maximum torque of 140Nm, and it is paired with a six-speed transmission.
14
1
Share

How many points are deducted for driving in the opposite direction due to road construction?

Driving in the opposite direction on regular roads results in a deduction of 3 points, while on highways, it leads to a deduction of 12 points. Driving in the opposite direction refers to turning into the opposite lane at an intersection or making a turn where it is prohibited by signs. If you are fined or penalized for driving in the opposite direction due to road construction, you can file an appeal by submitting an application to the local traffic management department. If the traffic department's images show that road construction was indeed taking place, the penalty may be revoked. Driving in the opposite direction means crossing the central road direction divider or directly making a U-turn to drive in the opposite direction. Both scenarios are severe traffic violations. Crossing the central divider can easily lead to head-on collisions with oncoming vehicles, while making a U-turn can cause accidents with vehicles traveling in the same direction. If this occurs on a highway, where speeds are high, it can result in extremely serious accidents. Due to these severe consequences, traffic police impose strict penalties for driving in the opposite direction. Some roads do not have a central barrier but only a dividing line. This setup is common on national highways or urban roads. On such roads, the central dividing line is often marked with a yellow line to enhance visibility and remind drivers to adhere to proper driving behavior. Crossing this central dividing line to drive in the opposite lane can easily lead to severe collisions with oncoming vehicles, regardless of whether the road is curved or straight.
18
2
Share

Should You Apply Partial Clutch Engagement and Accelerate After Shifting Gears?

When starting the car, you can apply partial clutch engagement and accelerate. However, when shifting gears, you should fully release the clutch before accelerating, otherwise, there will be a loud fuel control noise. It's essential to master the timing of gear shifting: Shift gears when the engine speed is around 2000 RPM. First, press the accelerator and then the clutch to prevent the clutch from being forcibly disengaged, then shift gears. The gear shifting sequence must be from first gear to second gear, then to third gear, fourth gear, and fifth gear. Skipping gears is not recommended. Downshifting should be based on the vehicle's speed. Generally, downshift when the engine speed drops below around 1500 RPM, depending on your car's condition. Gear Shifting: Gear shifting, abbreviated from "gear lever operation method," refers to the driver's psychological and physiological movements to continuously change the gear lever position according to road conditions and vehicle speed changes. Over time, due to its concise and straightforward name, it has become widely known. The frequency of use is very high, and the level of operational proficiency (especially in manual transmission cars) directly affects driving safety.
2
4
Share

Should the handbrake be pulled down or up when braking an automatic transmission car?

When braking an automatic transmission car, the handbrake needs to be pulled up. Below are the precautions for using the handbrake and its functions: Precautions for using the handbrake: Avoid pulling the handbrake too tightly to prevent system damage. Do not use the handbrake for long-term parking on slopes. Never pull the handbrake while driving at high speeds. Always release the handbrake before starting the car. Do not yank the handbrake abruptly, as this can damage it over time. The correct method is to pull the handbrake gently and smoothly until you clearly hear the clicking sounds of the handbrake engaging. When pulling the handbrake, the latch on the handbrake head will move back and forth due to the spring inside. To prolong the lifespan of the spring and the latch, press the latch with the pad of your thumb before pulling the handbrake. The optimal working point for the handbrake is when it is pulled up to 70%. Functions of the handbrake: Pulling up the handbrake when parking keeps the vehicle stationary and prevents it from rolling downhill. During driving, pulling up the handbrake while turning can create a drifting effect. In emergency situations, the handbrake can be used as a brake.
12
2
Share

What does AC mean on a car air conditioner?

AC on a car air conditioner is the cooling switch key. Pressing AC turns on the air conditioner. The functions of the air conditioner include: 1. Achieving a cooling effect through the continuous transformation and circulation of refrigerant; 2. Drawing in fresh air from outside to ventilate and exchange air, preventing window fogging; 3. Using engine coolant, waste heat, or heat generated by a burner as a heat source for heating, warming the air through a heater and blowing it into the car with a fan to raise the temperature for a heating effect; 4. Removing dust, odors, smoke, and toxic gases from the air inside the car to freshen the air, and humidifying the air inside the car to increase its relative humidity.
19
2
Share

Why is the average fuel consumption so high after resetting?

It is normal for the average fuel consumption to be higher after resetting. This is because calculating average fuel consumption requires statistics over a certain mileage, and immediately after clearing the fuel consumption data, the statistical mileage will be relatively low, resulting in greater fluctuations. Below is a brief introduction on how to save fuel: 1. Driving habits: Driving habits determine fuel consumption levels. Skilled drivers can achieve "harmony between man and car." Every action of controlling the car should be natural and smooth, with seamless transitions between acceleration and deceleration, and precise and proficient starting and stopping actions. This is an important factor in saving fuel. 2. Starting and stopping: The phases of starting and accelerating are peak periods of fuel consumption. Fuel consumption during these phases is more than double that of normal driving. It is important to start slowly, accelerate smoothly, and avoid starting with a heavy foot on the accelerator or accelerating aggressively. Especially when driving in urban areas with frequent traffic signals, the number of starts and accelerations is high. If operations are improper, fuel consumption can increase significantly. 3. Emergency braking: Avoid emergency braking as much as possible. Focus on driving, observe and judge distances ahead accurately and far in advance. When approaching traffic signals, lift your foot off the accelerator early, coast towards the waiting area, and brake gently when nearing the stopping point.
16
3
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.