What brand is Rotalla tires?

2 Answers
OMakayla
07/29/25 9:28am
Rotalla is the Letaile brand tire produced by Shandong YongSheng Rubber Group. Below are the detailed introductions: 1. Letaile brand tires are mainly used for passenger cars. Shandong YongSheng Rubber Group Co., Ltd. was established in 1986: The company integrates development, production, and sales, with its main products being YongSheng, JiXiang, and JinLiPu brand radial tire series. 2. The company's main production equipment is imported from Japan, the United States, Germany, etc.: For automobiles, the importance of tires is self-evident. At the same time, with the development of the automotive industry, there are more and more tire brands, each with different performance and quality.
Was this review help?
6
5
Share
StCollin
08/12/25 10:03am
I've been driving for a few years and have used Rotalla tires, which I find quite practical. Rotalla is actually an emerging tire brand from China, mainly producing mid-range tires for vehicles like regular sedans or compact SUVs. Its advantage lies in its affordability—you can get a full set for less than a thousand yuan, and the quality is decent with strong wear resistance. I installed them on my old car, and they perform well on city roads with minimal noise, decent grip, and no issues in rain or snow. The brand is quite popular in Asia, especially in developing countries, as its low cost lowers the barrier to car ownership. For someone like me—an average office worker with a limited budget but in need of reliable tires—it's a solid choice. Just remember to check the wear regularly and avoid long-distance high-speed driving to prevent blowouts; safety comes first. In short, if you're after value for money, I'd recommend giving Rotalla a try—it's not premium but gets the job done.
Was this review help?
17
2
Share
Expand All
More Forum Discussions

What causes abnormal noise from car tires?

Tire abnormal noise can be caused by the following reasons: 1. Suspension ball joint: Loose lower suspension arm ball joint with excessive clearance can produce noise when the car bumps. 2. Aging plastic components: Loose stabilizer bar bushings with excessive clearance will also generate abnormal noise. 3. Damaged shock absorber: A faulty shock absorber can cause noise when driving on uneven roads. Although shock absorbers have a relatively long service life, they are still a wearable component. If the vehicle operates in harsh conditions or is frequently driven aggressively, damage or oil leakage may occur. Additional information: If the buffer rubber has aged, simply replace the rubber. If the shock absorber is damaged or leaking, the entire shock absorber needs to be replaced.
17
2
Share

How far can a general 60V 20Ah battery go?

Generally, it can travel 50-60 kilometers. When driving in low gear, a single person can travel about 70 kilometers, in medium gear about 60 kilometers, and in high gear about 45-50 kilometers. Factors affecting the range: 1. Road conditions: Whether there are many traffic lights, traffic congestion, uphill roads, bumpy roads, smooth roads, or frequent starts—all these can consume a lot of electrical energy and affect the range. 2. Temperature: Low temperatures in winter significantly impact battery capacity, sometimes reducing it by half. 3. Driving habits: Avoid sudden acceleration and hard braking, as these can reduce the range.
17
5
Share

Does the Santa Fe cigarette lighter have current limiting?

The Santa Fe cigarette lighter has current limiting. The cigarette lighter is a component found in all vehicles, designed to provide a flame source for smokers. Commonly referred to cigarette lighters can be divided into those that draw power from the vehicle's electrical system. Some manufacturers produce cigarette lighters not for lighting cigarettes but solely for drawing power from the vehicle, which are also known as cigar lighters. The method for removing and installing the cigarette lighter is as follows: 1. Unscrew the housing: For some vehicles, the cigarette lighter socket has a screwed-on housing at the back, which can be unscrewed by turning it counterclockwise and reinstalled by turning it clockwise; 2. Remove screws: For some vehicles, the cigarette lighter socket is secured with screws at the back. Simply use a wrench to remove the screws to take it off, and reinstall it by screwing the screws back in; 3. Remove the panel: Remove the gear shift lever panel, which is attached with plastic clips. You can pry one side up by hand or with a flathead screwdriver to detach the entire panel; 4. Remove panel screws: After removing the gear shift lever panel, the cigarette lighter panel door will automatically open, revealing two black screws. Use an M4 hex key to remove them; 5. Remove the panel box: Pull the plastic panel box of the cigarette lighter out by hand. When it's pulled out about 10 centimeters, disconnect the wiring harness before pulling the entire box out; 6. Operate the inner and outer rings: The cigarette lighter consists of an outer and inner ring. Press the inner ring in to use it. Once it reaches a certain temperature, the inner ring will automatically return to its original position, at which point you can pull it out by holding the outer ring.
8
3
Share

How to Solve Water Leakage Inside the Car?

The solutions for water leakage inside the car are: 1. Replace the rubber seal of the sunroof; 2. Clean small sand particles and dust from the sunroof drainage channel; 3. Ensure the sunroof is properly closed; 4. Unclog the drainage pipe. The causes of water leakage inside the car are: 1. Small sand particles and dust in the sunroof drainage channel causing blockage; 2. Failure of the car's waterproof seal; 3. The sunroof glass is not properly closed; 4. Malfunction of the sunroof drainage system. The effects of car water leakage are: 1. Minor leakage at the sunroof can lead to mold; 2. Door leakage can damage the door lock and affect the window lifting system; 3. Trunk leakage can cause corrosion.
17
1
Share

What Causes Steering Wheel Pulling to One Side?

Steering wheel pulling to one side can be caused by: 1. Uneven tire pressure; 2. Different tire tread patterns or varying tread depths; 3. Deformation of front shock absorber springs; 4. Failure of front shock absorbers; 5. Body deformation; 6. Excessive wear of chassis components; 7. Incorrect wheel alignment; 8. Brake system malfunction. Steering wheel pulling refers to the phenomenon where a vehicle traveling straight on a flat road naturally drifts to one side, causing misalignment between the centerline of the front and rear axles and the vehicle's actual travel path. Adjustment methods include: 1. Slightly adjusting the steering wheel to the right when the vehicle drifts left, and vice versa; 2. Rotating or replacing tires; 3. Replacing suspension springs.
4
1
Share

Why is the ETC light not on?

The reasons why the ETC light is not on are: 1. The ETC device is damaged; 2. The ETC device is out of power. The method to install ETC is: 1. Peel off the double-sided adhesive plastic film on the back of the ETC device and stick it to the position behind the rearview mirror at the top of the windshield; 2. Press firmly for about 10 seconds after sticking; 3. Insert the card into the ETC device repeatedly several times. Precautions for using ETC include: 1. The ETC transaction sensing area is 8 meters. To prevent the ETC device failure of the vehicle in front, keep a distance of more than 10 meters from the vehicle in front; 2. The recognition speed of the ETC lane is 20 kilometers per hour. If the speed is too fast, the vehicle device information cannot be read, which will lead to charging failure; 3. When using a debit card to bind ETC, insufficient balance will also lead to charging failure.
4
0
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.