What brand is Rexroth?

Is the Mitsubishi ASX compliant with China VI emission standards?

The Mitsubishi ASX complies with the China VI emission standards. China VI refers to the National Sixth Stage Emission Standards for Motor Vehicles, which are established to prevent environmental pollution caused by exhaust emissions from compression-ignition and gas-fueled spark-ignition engine vehicles, protect the ecological environment, and safeguard human health. The Mitsubishi ASX is a compact 5-door, 5-seat SUV with the following dimensions: length 4366mm, width 1780mm, height 1640mm, and a wheelbase of 2670mm. It is equipped with a 1.6L naturally aspirated engine and a 5-speed manual transmission, delivering a maximum power of 91 kW and a maximum torque of 149 Nm. The vehicle features front-wheel drive, with a front suspension using MacPherson struts and a rear suspension employing a multi-link independent suspension.

15

3

Share

Which car brand has several stars in its logo?

The car brand with several stars in its logo is Subaru. Its models include the Legacy, Forester, Outback, Impreza, and Subaru XV. Taking the 2020 Legacy All-Wheel Drive Fashion Edition as an example, it is a mid-sized 4-door 5-seater sedan with dimensions of 4815mm in length, 1840mm in width, and 1500mm in height, with a wheelbase of 2750mm. The 2020 Legacy All-Wheel Drive Fashion Edition is equipped with a 2.5L engine and a CVT continuously variable transmission, delivering a maximum power of 126 kW and a maximum torque of 235 Nm. It features a front-engine four-wheel-drive layout, with a front MacPherson independent suspension and a rear double-wishbone independent suspension.

13

1

Share

What Causes Abnormal Noise When Shaking the Front Wheels After Parking?

The reasons for abnormal noise when shaking the front wheels after parking are: 1. Faulty front shock absorbers; 2. Loose front wheel drive half-shafts; 3. Loose chassis screws and rubber components; 4. Loose ball joints and bearings; 5. Cracked wheel hub bearings; 6. Insufficient grease in the wheel hub; 7. Bent steering tie rods. The inspection steps for abnormal noise in the front wheels are: 1. Use a lift to raise the vehicle; 2. Check if the screws and rubber components at the front of the chassis are loose; 3. Inspect the shock absorbers for proper condition before disassembly; 4. Remove the front wheels to inspect the bearings; 5. Check if the front wheel drive half-shafts are loose; 6. Determine the cause of the fault and replace the necessary components.

11

5

Share

What is the small switch on the right side of the headlight switch in a Volkswagen?

The small switch on the right side of the headlight switch in a Volkswagen is used to adjust the instrument panel's interior lighting background and brightness. Taking the 2021 Volkswagen Lamando Fashion Edition as an example, it is a compact 4-door, 5-seater sedan with body dimensions of 4615mm in length, 1826mm in width, and 1425mm in height, with a wheelbase of 2656mm. The 2021 Volkswagen Lamando Fashion Edition is equipped with a 1.4T turbocharged engine and a 7-speed dual-clutch transmission, delivering a maximum power of 96 kW and a maximum torque of 225 Nm. It features front-wheel drive, with a MacPherson independent suspension at the front and a multi-link independent suspension at the rear.

1

2

Share

What does the steering wheel warning light on the Wuling Hongguang S dashboard mean?

Wuling Hongguang S dashboard showing the steering wheel warning light indicates a fault in the power steering system. A malfunction in the power steering system can cause symptoms such as heavy steering, steering noise, steering wheel vibration, and poor steering wheel return ability. The Wuling Hongguang S is a microvan with body dimensions of 4390mm in length, 1660mm in width, and 1750mm in height, with a wheelbase of 2720mm. It is equipped with a 1.2L engine and a 5-speed manual transmission, delivering a maximum power of 56 kW and a maximum torque of 110 Nm. The drive system is front-engine, rear-wheel drive, with a front suspension using MacPherson strut independent suspension and a rear suspension using leaf spring non-independent suspension.

7

4

Share

What to do if the car engine is knocking?

When the knocking is slight, the engine power is slightly unstable, the engine shakes severely, and it will cause the engine to overheat and emit black smoke. The solutions for car engine knocking are as follows: 1. After the engine starts, if there is a knocking sound during low-temperature operation, and the sound disappears when the temperature returns to normal, it can be left untreated temporarily and continue to run. 2. When the engine temperature is normal, if there is an obvious knocking sound, high-speed operation should be avoided as much as possible, and the engine should be disassembled and repaired as soon as possible. 3. If the cylinder is severely out-of-round, scratched, or the gap between the piston and the cylinder is too large, it should be replaced. 4. If the connecting rod is found to be deformed, it should be replaced as much as possible.

17

3

Share

What brand is Rexroth?

Is the Mitsubishi ASX compliant with China VI emission standards?

Which car brand has several stars in its logo?

What Causes Abnormal Noise When Shaking the Front Wheels After Parking?

What is the small switch on the right side of the headlight switch in a Volkswagen?

What does the steering wheel warning light on the Wuling Hongguang S dashboard mean?

What to do if the car engine is knocking?

What is the difference between the Tiguan and the Tiguan L?

How to reset the maintenance light on a Bora?

Is there a traffic restriction on Yangpu Bridge?

What are the effects of high temperature on a car?