What brand is represented by a cross and a snake?

What to Do with a Bulging Tire?

Tires with bulges need to be replaced with new ones as they cannot be repaired. The method to change a tire is as follows: 1. Place the jack on the designated position of the chassis support and loosen the screws diagonally using the wrench; 2. Hook the support onto the jack and attach the wrench to the end of the support, then rotate the wrench clockwise to lift the tire off the ground with the jack; 3. Remove the screws and take off the tire for replacement. Tires are circular elastic rubber products mounted on various vehicles or machinery to roll on the ground. Their functions include: 1. Transmitting driving force, braking force, and steering force through the tire; 2. Supporting the vehicle load; 3. Reducing and absorbing vibrations and impacts during vehicle operation.

3

Share

What is the function of the mode button?

mode button is a toggle switch for the car's multimedia system, used to switch between radio, CD, or USB. Generally, this button is located on the car's center console or steering wheel. Translated, mode means 'mode' or 'direction.' When this button is on the steering wheel, it is primarily used to adjust the multimedia system; when located in the center console's air conditioning area, it is used to switch between air outlet modes, typically cycling between head, foot, and windshield modes. Car steering wheel and center console buttons: Starting with the steering wheel, multifunction steering wheels integrate audio controls and dashboard information center controls on both sides, along with other configurations. Behind the steering wheel, car light controls and wiper controls are usually integrated on separate stalks, with some models also featuring adaptive cruise control.

14

5

Share

What is the simple method for making a 90-degree turn?

The simple method for making a 90-degree turn is: 1. Park the vehicle at the starting position for the 90-degree turn. After hearing the voice prompt, shift into first gear, release the handbrake, slowly lift the clutch, and maintain a semi-linked state to start moving at a steady speed; 2. Drive the vehicle appropriately close to the left side of the road, maintaining a distance of generally 20 to 30 cm. Adjust this distance from the beginning and avoid making corrections when close to the turn; 3. After adjusting the distance, focus your attention on the right door window glass. When the A-pillar aligns with the horizontal line of the inner corner of the 90-degree turn (or when the front hood of the car just covers the yellow line ahead), you can turn the steering wheel fully to the right; 4. After completing the turn, when you feel the car is about to straighten, slowly return the steering wheel to the center, then turn the steering wheel to the left to align the car body parallel with the lane edge line, and turn off the turn signal.

14

0

Share

How to Check the National Emission Standard of a Vehicle?

Methods to check the national emission standard of a vehicle: 1. Check the vehicle's environmental protection label; 2. Log in to the Motor Vehicle Exhaust Pollution Supervision and Management Center for inquiry; 3. Check the vehicle's factory certificate; 4. Make a rough judgment based on the year the vehicle was registered; 5. Use the original or a copy of the motor vehicle registration certificate to inquire at the local vehicle management office. Vehicle emission standards are divided into: National Phase I Motor Vehicle Pollutant Emission Standard, National Phase II Motor Vehicle Pollutant Emission Standard, National Phase III Motor Vehicle Pollutant Emission Standard, National Phase IV Motor Vehicle Pollutant Emission Standard, National Phase V Motor Vehicle Pollutant Emission Standard, National Phase VI Motor Vehicle Pollutant Emission Standard.

12

4

Share

Does the Odyssey have a hybrid version?

Odyssey has a hybrid version, which is equipped with a hybrid powertrain consisting of a 2.0L naturally aspirated engine and an electric motor. The engine delivers a maximum power of 107kW and a maximum torque of 175Nm, while the electric motor provides a total power output of 135kW and a total torque of 315Nm. The Odyssey is an MPV launched by GAC Honda, with dimensions of 4847mm in length, 1820mm in width, and 1702mm in height, and a wheelbase of 2900mm. It features MacPherson strut front suspension, torsion beam rear suspension, and electric power steering.

8

2

Share

What does Chery 290t represent?

Chery 290t represents the 2019 Chery Tiggo 8, which comes in five variants: Fashion Edition, Elite Edition, Luxury Edition, Premium Edition, and Flagship Edition. The 2019 Tiggo 8 is a mid-size SUV launched by Chery Auto, with dimensions of 4700mm in length, 1860mm in width, and 1746mm in height, and a wheelbase of 2710mm. It is equipped with a 1.5T turbocharged engine, paired with either a 6-speed manual or a 6-speed dual-clutch transmission. The front fascia of the 2019 Tiggo 8 features a large-sized grille with a single horizontal chrome strip, flanked by slim headlights that integrate with the chrome trim, effectively extending the visual width of the front end.

3

5

Share

What brand is represented by a cross and a snake?

What to Do with a Bulging Tire?

What is the function of the mode button?

What is the simple method for making a 90-degree turn?

How to Check the National Emission Standard of a Vehicle?

Does the Odyssey have a hybrid version?

What does Chery 290t represent?

Should an Automatic Transmission Car Be Turned Off First or Shifted to P Gear First When Parking?

What engine does the Volkswagen Passat use?

What brand is the car with the cobra logo?

What motor does the NIO ES8 use?