What brand is Peugeot?

What Causes the Sizzling Sound from the Rear Wheels?

The reasons for the sizzling sound from the rear wheels: 1. Worn brake pads: One possible reason is severely worn brake pads. Thinner brake pads can produce metallic noises during operation, which not only affect driving comfort but also impact the vehicle's braking performance. Therefore, it's necessary to visit a 4S shop for repair or replacement. 2. Debris in the brake disc: Another possible cause is debris, such as small stones or broken nails, entering the brake disc, which can also create abnormal noises while driving. 3. Deformed brake pad shield: If the brake pad shield is deformed, it may rub against the rotating tire during driving, producing abnormal noises. In such cases, promptly visit a repair shop for inspection, repair, or replacement.

8

4

Share

What does the NCD fault code mean?

NCD fault code refers to the NCD fault light, which is an indicator of the driver alarm system. The following are the reasons for the NCD fault light to illuminate: 1. Urea concentration: Adding unqualified urea, with concentration too high or too low, or diluting urea with water can all trigger a urea quality fault. The NCD light will be steadily yellow, and if the engine runs for more than 10 hours, the engine torque will be limited to 75%. 2. EGR valve sticking: When the EGR valve sticks, the NCD light will be steadily yellow, and if the engine runs for more than 36 hours, the engine torque will be limited to 75%.

17

0

Share

Should the Handbrake Be Engaged When in N Gear?

Engaging the handbrake is necessary when in N gear. Below is a relevant introduction about gear positions: Straight-line gear positions are easy to engage: This gear design is very common, and many brands of automatic transmission vehicles currently use this type. The advantage of this straight-line gear design is that shifting is relatively straightforward, while the disadvantage is that it's easy to engage the wrong gear when operating blindly. Staggered gear positions are not easy to engage: Staggered gear positions, also known as serpentine gear positions, are another very common design for automatic transmission gear positions. Their advantages and disadvantages are exactly the opposite of straight-line gear positions. The advantage is that it's not easy to engage the wrong gear, while the disadvantage is that the operation is not as direct as with straight-line gear positions.

8

1

Share

What is the difference between Michelin 3st and 4st?

Introduction to the differences between Michelin 3st and 4st: 1. Different drainage performance. Michelin Primacy 4 features a new tread design through Evergrip technology, increasing drainage space by over 50% compared to 3st, providing excellent drainage that significantly reduces hydroplaning. 2. Different rubber compound. Compared to 3st, Michelin Primacy 4 adopts a new tread design and new rubber compound, improving wet braking performance and rolling resistance for both new and worn tires. 3. Different safety performance. Due to the new rubber compound, Michelin 4th generation boasts excellent braking performance, with particularly outstanding wet braking. Official data shows that Michelin Primacy 4 outperforms 3st by a full 2.4m in wet braking distance, enhancing driving safety to some extent.

6

3

Share

What is the reason why the van key cannot be turned?

The reason why the van key cannot be turned is that the automatic steering wheel lock function has been activated. Here are the relevant explanations: 1. The steering wheel lock is an anti-theft function of the car to ensure vehicle safety. The solution is to insert the key, step on the brake, and turn the steering wheel left and right. The locked steering wheel can be slightly turned a little. While turning the steering wheel, turn the key to complete the steering wheel unlocking procedure. 2. After the van is turned off, turning the steering wheel left and right or if the wheels are not straight when parking will cause the steering wheel to turn under force, triggering the steering wheel self-lock function. The steering lock pin and steering column are engaged together, preventing the steering wheel from turning. At this time, the vehicle's anti-theft system considers that there is a risk of theft, so it locks the steering wheel to achieve the anti-theft function.

14

2

Share

Can Used Cars with China 5 Emission Standard Still Be Registered?

Used cars with China 5 emission standard can be registered. The implementation of China 6 emission standard and the restriction on China 5 registration mainly target new cars. New cars with China 5 emission standard will be restricted from registration. However, used cars with China 5 emission standard in the used car market are not subject to registration restrictions because used car transactions only involve normal transfer procedures and do not require re-registration. Relevant information is as follows: 1. China 6 and China 5 emission standards have no impact on used car transactions. 2. Vehicles with China 5 emission standard are allowed to be driven on the road if they have already been licensed.

1

0

Share

What brand is Peugeot?

What Causes the Sizzling Sound from the Rear Wheels?

What does the NCD fault code mean?

Should the Handbrake Be Engaged When in N Gear?

What is the difference between Michelin 3st and 4st?

What is the reason why the van key cannot be turned?

Can Used Cars with China 5 Emission Standard Still Be Registered?

Does the 2019 Sylphy Meet China VI Emission Standards?

How to Adjust Vehicle Mirrors Properly?

How Many Car Spark Plugs Should Be Replaced at Once?

What does Rear mean on car air conditioning?