What brand is Mozzo tires?

2 Answers
CharlotteDella
09/01/25 7:48am
It is Delinte tires, produced by Shaanxi Yanchang Petroleum Group Rubber Co., Ltd. The company was established in December 2008 and is located in Fengwei New District, Xixian. It is a subsidiary of Shaanxi Yanchang Petroleum (Group) Co., Ltd., a Fortune 500 company. Tires are circular elastic rubber products assembled on various vehicles or machinery, usually mounted on metal rims. They have high load-bearing performance, traction performance, cushioning performance, high wear resistance, and flex resistance, as well as low rolling resistance and heat generation. Tires are often used under complex and harsh conditions. During driving, they endure various deformations, loads, forces, and high and low temperatures. Therefore, they must have relatively high load-bearing performance, traction performance, and cushioning performance, as well as high wear resistance and flex resistance, along with relatively low rolling resistance and heat generation. They directly contact the road surface and, together with the car suspension, mitigate the impact during driving, ensuring good ride comfort and smoothness. They also ensure good adhesion between the wheels and the road surface, improving the car's traction, braking, and off-road performance, while bearing the weight of the car. Methods for maintaining Delinte tires: Increase awareness of tire safety and inspect tires regularly. Regularly correct wheel balance. Unbalanced wheels can cause high-frequency oscillations during high-speed driving, leading to uneven tire wear. Perform regular tire rotation. To maintain even wear on all tires of the same vehicle, rotate the tires every 5,000 kilometers. In daily use of Delinte tires, pay attention to the following points: Regularly check the tire surface for cracks, deformations, or other defects. Due to driving wear, the tread grooves gradually become shallow. If the tread is worn out, it will lose its drainage and anti-slip functions, significantly reducing the car's performance. Small cracks may also pose a risk of tire blowouts during high-speed driving. Additionally, remove stones from the grooves immediately. Park on flat ground whenever possible. Avoid parking on roads with thick, sharp, or pointed stones. Do not park near or in contact with petroleum products, acids, or other materials that can deteriorate rubber. After parking, do not turn the steering wheel, as this will accelerate tire wear. Do not splash water to cool down. In hot weather or during high-speed driving, tires are prone to overheating, and the pressure increases. In such cases, stop to cool down the tires. Do not release air to reduce pressure or splash water to cool them, as this may cause abnormal aging of the tread rubber. Avoid sudden braking. Try to minimize frequent and hard braking to prevent accelerated tread wear due to dragging between the tires and the ground.
Was this review help?
12
3
Share
SanVictoria
09/14/25 3:29am
I remember when I was driving and thinking about changing tires, I heard that Mozzo tires are an affordable brand, specifically designed for everyday small cars. The price is quite budget-friendly, with each tire costing just a few dozen dollars. The wear resistance is decent, but the grip isn't as stable at high speeds. I searched online and found that this brand is more common in Asia and Africa, focusing on cost-effectiveness, making it suitable for budget-conscious car owners. There are so many tire brands out there—when choosing, don't just go for the cheapest option. Pay attention to whether the tread pattern suits local road conditions. For example, in areas with lots of rain, you should pick tires that perform well on wet roads. Also, remember to check the tire's manufacturing date—avoid using tires older than five years, as they pose significant safety risks.
Was this review help?
10
3
Share
Expand All
More Forum Discussions

Where is the Cruise Control on the Honda Avancier?

The cruise control on the Honda Avancier is located on the multifunction buttons on the left side of the steering wheel. The principle of cruise control is: the cruise control module reads the pulse signal from the speed sensor and compares it with the set speed, then issues commands to the servo mechanism to mechanically adjust the throttle opening to increase or decrease, ensuring the vehicle maintains the set speed. Taking the 2020 Honda Avancier as an example, it belongs to the midsize SUV category, with body dimensions of: length 4585mm, width 1942mm, height 1670mm, a wheelbase of 2820mm, a trunk capacity of 510l, and a curb weight of 1708kg.
5
5
Share

What is the usage method of car battery charging clamps?

The usage method of car battery charging clamps is: connect the positive clamp to the positive terminal of the battery, and the negative clamp to the negative terminal of the battery. The functions of the battery are: 1. To supply power to the starting system, ignition system, and electronic fuel injection system when starting the engine; 2. To supply power to the car's electrical equipment when the engine is stopped or at low idle speed; 3. To assist in supplying power to electrical equipment when the generator's output is insufficient; 4. To mitigate impact voltage in the electrical system and protect the electronic equipment in the car; 5. To store excess electricity generated by the alternator. The maintenance methods for the battery are: 1. Start the car regularly to charge the battery; 2. Add distilled water or special replenishing fluid when the electrolyte is insufficient; 3. Frequently check whether the small holes on the battery cover are ventilated during daily driving; 4. Check whether the positive and negative terminals of the battery are oxidized; 5. Check whether any part of the circuit is aged or short-circuited; 6. Turn off electrical equipment when leaving the car.
7
1
Share

Is car window film applied on the outside or inside of the glass?

Car window film is applied on the inside of the glass. The functions of car window film are: 1. Providing heat insulation in summer to save air conditioning energy; 2. Reducing heat loss in winter to maintain interior temperature; 3. Blocking UV rays to prolong the lifespan and quality of interior decorations by preventing direct sunlight exposure; 4. Reducing glare to ensure driving safety and comfort. Post-installation precautions include: 1. Avoiding window operation for 3 days; 2. Not cleaning the film or using defogger heating wires for one week; 3. Not using fingernails or sharp objects to peel the edges to prevent dirt ingress; 4. Avoiding suction cup items on the film for 1-2 weeks; 5. Seeking professional assistance immediately for bubbles, displacement, or visual obstructions to ensure driving safety.
11
0
Share

What are the consequences of adding tap water to the engine radiator?

Adding tap water to the engine radiator can cause the car to malfunction due to excessive temperature. The following are the specific reasons and methods for dealing with radiator boiling: Reasons: The car radiator is the main component of the car's cooling system. The car radiator should not come into contact with any acid, alkali, or other corrosive substances to prevent aging. Soft water should be used in the radiator. Hard water needs to be softened before use to avoid internal blockage and scale formation in the car radiator. It is recommended to choose long-lasting antifreeze that meets national standards and is produced by reputable manufacturers. Tap water tends to produce more rust, which is detrimental to the smoothness of the engine's water passages. Handling radiator boiling: If the temperature gauge rises during driving, choose a safe place to stop immediately, turn off the engine, and open the hood to help the engine cool down. After about half an hour, the engine temperature will return to normal. Then, carefully check the radiator scale and whether the fan is damaged. If the radiator is low on water, you can add purified water or antifreeze after it has cooled for a while. Do not add cold water directly. Always use a wet towel to cushion the opening of the radiator cap to prevent steam burns.
3
0
Share

What Does It Mean for a Car's Chassis to Be Stable?

Car chassis stability refers to: 1. Sturdy vehicle structure; 2. Good driving stability; 3. Excellent handling. The function of a car chassis is to support and install the car engine and its various components and assemblies, form the vehicle body shape, receive the engine's power, enable the car to move, and maintain normal driving. The maintenance methods for a car chassis include: 1. Regularly check the condition of the car tires; 2. Periodically clean and wipe the car chassis; 3. Promptly inspect the working conditions of various components during car operation; 4. Regularly maintain and inspect the car's shock absorbers. The structure of a car chassis consists of the transmission system, running system, steering system, and braking system.
6
0
Share

How many speakers does the BMW E90 have?

BMW E90 has six speakers. Methods to maintain speaker appearance cleanliness: Ensure all wiring connections are secure. Regularly inspect and tighten the fixing screws of the speakers and brackets to ensure reliable grounding. Speaker mounting methods: The mounting method of the speaker significantly affects its sound output. To ensure normal sound production, speakers should not be rigidly mounted. Instead, they should be fixed on a vibration-damping bracket, meaning a leaf spring or rubber pad should be installed between the speaker and the mounting bracket. Checking generator output voltage: Excessive voltage can burn out the speaker contacts, while insufficient voltage (below the speaker's rated voltage) will cause abnormal sounds from the speaker.
8
2
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.