···
Log in / Register

What brand is motion?

6Answers
Colin
07/28/2025, 07:01:19 PM

Volkswagen motion is not a brand, but Volkswagen's four-wheel drive system, fully named 4motion. Volkswagen's 4motion four-wheel drive system is equipped on many models under Volkswagen, with the most famous being the performance hot hatch Golf R. Here is some extended information: System Composition: Volkswagen's 4motion system is a full-time four-wheel drive system that integrates many advanced technologies. This four-wheel drive system can freely distribute power based on the vehicle's driving conditions, theoretically allocating all power to a single wheel in extreme situations. This is the remarkable feature of 4motion. Coupler: This four-wheel drive system is equipped with a four-wheel drive coupler behind the central drive shaft, which is responsible for distributing the power transmitted to the rear wheels. Many current four-wheel drive systems operate on a similar principle. Volkswagen's 4motion system is a four-wheel drive system installed on transverse-engine front-wheel-drive vehicles. This type of four-wheel drive system takes power from the front axle differential, then transmits it to the rear axle via a central drive shaft, and finally distributes the power to the rear axle through the four-wheel drive coupler. Advantages: This four-wheel drive system is highly efficient and intelligent, capable of distributing power between the front and rear axles according to the vehicle's needs. If you see the 4motion badge on the rear of a Volkswagen model, it indicates that the model is equipped with the 4motion four-wheel drive system.

Was this review help?
113
Share
StLayla
08/11/2025, 10:21:42 PM

The name Motion has not actually been used as an independent vehicle brand, but rather as a product or technical name by other automakers. For example, Hyundai has the Hyundai Motion concept car, and Mitsubishi's Ralliart performance division has released the Motion series of tuning kits, including aerodynamic components and suspension upgrades. At car meets, I often hear tuning enthusiasts talk about these. Nowadays, some third-party accessory manufacturers also offer Motion Edition rear badges or carbon fiber trim pieces—small touches to add a sporty vibe to their cars. As for a full-fledged vehicle brand with the Motion badge, there really isn't one in the market at the moment.

Was this review help?
14
Share
Expand All
Cara
08/11/2025, 10:22:14 PM

As a car tech enthusiast who frequently hits the track, my understanding of 'Motion' leans more towards engineering terminology. It commonly appears in chassis system names, such as Porsche's Porsche Dynamic Chassis Control Motion technology, which refers to the four-wheel steering function that can independently control the wheels. During a technical training session, the instructor mentioned that German automakers particularly like to use the term 'Motion' to highlight dynamic performance. Niche brands like Motion Auto available in the market are actually aftermarket customization shops offering personalized accessories, such as grille badges or sport seats, which are completely different from original equipment manufacturer brands.

Was this review help?
17
Share
Expand All
AlexanderMarie
10/01/2025, 12:57:57 AM

Flip through any car magazine and you'll notice the term 'Motion' frequently appears in the names of limited special edition models. I recall Toyota North America released the Camry TRD Motion Edition, which added blacked-out wheels and a spoiler to the base model; Infiniti's Q Inspiration Motion concept followed a similar approach. A friend who works as an after-sales manager at a 4S store mentioned that many owners inquire about ordering standalone OEM Motion kits—these are essentially exterior appearance packages including front/rear bumpers and exhaust pipe trims. No mainstream automaker actually brands their vehicles solely as 'Motion'; it's currently a popular marketing tactic among manufacturers to use such English buzzwords in naming.

Was this review help?
13
Share
Expand All
Nova
11/14/2025, 01:45:43 AM

Ordinary consumers are most easily confused by the English badges on the rear trunk. Based on my years of experience in vehicle appraisal, many parallel import car dealers like to stick the word "Motion" on Middle East versions to indicate a sporty edition. Once, while helping a friend inspect a used car, I found an old Highlander with a "Motion" badge, which in reality just had a factory-installed sport front grille. There are some third-party tuning brands in the market called things like "AutoMotion" that specialize in custom steering wheels and pedals, but no official car brand actually uses "Motion." To confirm a vehicle's identity, the safest way is to check the manufacturer code in the 10th digit of the VIN.

Was this review help?
16
Share
Expand All
LeSarah
01/04/2026, 03:26:23 AM

Over the past twelve years of car modification, I've encountered many parts named 'Motion,' mostly from Japanese tuning brands like AutoExe that produce performance upgrades. For instance, the Motion Control full-car bushings for the Honda Fit reduce cornering body roll, or the Motion V damping-adjustable tie rods used on the Nissan GT-R. As for full vehicle brands, there was actually an early electric vehicle startup in Europe called Motion that produced a prototype, but it went bankrupt before mass production. Nowadays, if you search for 'Motion cars,' most of what comes up are imitation sport seat kits from small domestic manufacturers.

Was this review help?
5
Share
Expand All
More Q&A

What happens if the carbon canister tubes are connected in reverse?

Connecting the carbon canister tubes in reverse can affect the engine. Here is an introduction about the engine: 1. Definition: Idle speed refers to the minimum speed at which the engine maintains stable operation without any load. During idle, the clutch pedal and throttle pedal are completely relaxed, and the transmission is in neutral. At this time, the engine only needs to overcome the internal friction resistance of its own components and the operating resistance of the accessories, without outputting power externally. 2. Reason: High idle speed is generally caused by excessive carbon deposits. Timely cleaning of the throttle valve and idle speed control motor can usually solve the problem.
114
Share

What is the normal tire pressure for Changan vehicles?

The normal tire pressure for Changan vehicles is around 2.3-2.5 bar. According to the international GBT2978-2008 standard, the recommended tire pressures for different types of tires are as follows: Standard tires: 2.4-2.5 bar; Reinforced tires: 2.8-2.9 bar; Maximum pressure: should not exceed 3.5 bar. Hazards of overinflated tires: Reduced friction and adhesion of tires, affecting braking performance; Causes steering wheel vibration and deviation, reducing driving comfort; Accelerates wear on the central tread pattern, shortening tire lifespan; Increases vehicle vibration, indirectly affecting the lifespan of other components; Excessive stretching of tire cords reduces elasticity, increasing the load on the vehicle during driving; Decreases puncture resistance. Sharp objects like nails or glass can easily penetrate the tire, leading to internal cracks or blowouts. Hazards of underinflated tires: Increases friction with the road surface, leading to higher fuel consumption; Causes heavy steering and deviation, compromising driving safety; Increases movement of tire parts, leading to abnormal heat generation due to excessive rolling; Reduces the functionality of cords and rubber, causing delamination or cord breakage and excessive friction with the rim, leading to damage and abnormal wear; Multiplies friction between the tire and ground, rapidly increasing tire temperature, softening the tire, and drastically reducing strength. High-speed driving may cause blowouts; Increases tire deformation, leading to sidewall cracks and flexing, causing excessive heat, rubber aging, cord fatigue, and breakage, while also increasing the tire's contact area and accelerating shoulder wear.
104
Share

How to Reset the Tire Pressure Light on a Grand Cherokee?

The method to reset the tire pressure monitoring system on a Grand Cherokee: First, turn on the ignition switch, then press and hold the tire pressure monitoring reset button until you hear a "ding" sound before releasing it. The tire pressure monitoring system will then store the current normal tire pressure data, automatically clear the previous data, and finally, the warning light on the dashboard will turn off, completing the tire pressure reset. The tire pressure monitoring indicator is a yellow symbol, an irregular circle with no seal on top, four small spikes at the bottom, and an exclamation mark inside. The illumination of the tire pressure monitoring indicator indicates abnormal tire pressure. Abnormal tire pressure is generally caused by one of the following three reasons: Abnormal tire pressure: The system typically alerts when the pressure is below 1.8 bar or above 3.0 bar. In this case, tire inspection and pressure adjustment are required. Tire pressure monitoring not reset: After inflating the tires, if the tire pressure reset is not performed promptly, the tire pressure monitoring system will still record the previous data, causing the tire pressure monitoring indicator to light up. Simply perform a tire pressure reset in this situation. Damaged tire pressure sensor: The tire pressure sensor, used to monitor tire pressure, is directly installed inside the tire and connected to the tire inflation valve. If the tire pressure sensor is damaged during driving, such as by hitting a curb, the tire pressure warning light will also illuminate. For sensor damage issues, only replacement with a new component is possible.
114
Share

What Are the Causes of Abnormal Noises from Car Air Conditioning Vents?

There are many reasons for abnormal noises in car air conditioning, including damage to the car air conditioning compressor, blockage of the air conditioning vents, wear of the fan blades, etc. Damage to the car air conditioning compressor: Lack of lubrication, wear of the rotating shaft, and inability to compress normally. When the air conditioning compressor has problems, the car's air conditioning system will produce abnormal noises or fail to cool. Blockage of the air conditioning vents: Simply clean the air conditioning vents in a timely manner. It should be noted that the car air conditioning filter should also be cleaned and replaced regularly. Generally, it should be cleaned every 5,000 kilometers of driving. Wear of the fan blades: Loss of lubrication in the fan bearings or obstruction of the fan blades by foreign objects. Check if there is any damage at the root of the fan blades and replace them promptly if necessary; inspect the gears in the gearbox and replace the entire gearbox if any damage is found; ensure the fan is placed stably and tighten all loose components to prevent noise. Abnormal noise from the blower or air conditioning flap motor: Noise caused by foreign object obstruction or damage itself. In such cases, simply disassemble the bearing and add some grease for lubrication.
114
Share

Will the 4S store provide a temporary license plate when picking up the car?

Car owners must purchase insurance in advance to obtain a temporary license plate from the 4S store. Below is relevant information about temporary license plates for new cars: Validity period of temporary license plates: The temporary license plate expires in 15 days. During the period of using the temporary license plate without a formal license plate, violating traffic rules and being caught by traffic police will result in corresponding demerit points and fines. Materials required for applying for a temporary license plate: Identification documents of the vehicle owner and agent, proof of vehicle origin, the whole vehicle factory certificate for domestically produced vehicles, import certificate for imported vehicles, vehicle identification code (frame number), and engine number rubbing.
113
Share

How often should the Mistra's spark plugs be replaced?

Mistra's spark plugs should be replaced every 60,000 kilometers. Methods to determine if spark plugs are damaged: Remove the spark plugs and observe their appearance color to assess their condition. Normal spark plugs will have a skirt insulator and electrodes that appear gray-white, gray-yellow, or light brown. If the spark plugs are covered in oil or deposits, the spark plugs themselves are not damaged. If the top of the spark plug shows signs of blistering, black streaks, or similar phenomena.
120
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.