What brand is Montare tires?

1 Answers
MacRyan
07/25/25 2:29am
Montare is a new tire brand under the Sailun Jinyu Group – ROVELO (Ruilu) brand tires. The size is 205/55/16R. Ruilu tires are a brand under Sailun Jinyu Group Co., Ltd. Sailun Jinyu has modern tire manufacturing plants in Qingdao, Dongying, Shenyang in China and Tay Ninh in Vietnam, a natural rubber deep processing base in Thailand, and sales networks and logistics centers in Canada, the UK, and other regions serving the Americas and Europe. When using Montare tires in daily life, pay attention to the following points: Regularly check the tire surface for cracks, deformations, and other defects. Due to driving wear, the tread grooves of the tires gradually become shallow. If the tread is worn flat, it will lose its drainage and anti-slip functions, significantly reducing the car's performance. Small cracks may also pose a hidden danger of tire blowouts during high-speed driving. Additionally, promptly remove pebbles from the grooves. Try to park on flat ground. Avoid parking on roads with thick, sharp, or pointed stones. Do not park near or in contact with petroleum products, acids, or other materials that may deteriorate rubber. After parking, the driver should not turn the steering wheel, as this will accelerate tire wear. Do not splash water to cool down. In hot weather or during high-speed driving, tires are prone to overheating, and the air pressure will increase. In such cases, stop to allow the tires to cool down naturally. Do not release air to reduce pressure or splash water to cool them, as this may cause abnormal aging of the tread rubber. Avoid sudden braking. Try to minimize frequent braking and sudden stops to prevent accelerated tread wear caused by dragging between the tires and the ground.
Was this review help?
8
3
Share
More Forum Discussions

What are the sound insulation materials for cars?

Automotive sound insulation materials include: sealing strips, foam filling, damping adhesive, sound insulation cotton, engine insulation pads, and low-frequency mesh. The full-vehicle sound insulation locations cover: chassis, four doors, trunk, tailgate, hood, fenders, roof, dashboard, firewall, and U-shaped channel. The functions of car maintenance are: 1. Ensuring the vehicle's excellent performance state; 2. Improving driving safety; 3. Reducing engine noise; 4. Extending the vehicle's service life. Car maintenance items include: 1. Replacing engine oil, oil filter, air filter, and fuel filter; 2. Inspecting the body and tires; 3. Checking the braking system; 4. Examining chassis damage; 5. Inspecting fluid levels.
7
3
Share

Which port is used to add car antifreeze?

Car antifreeze is added through the auxiliary tank port, and the method of adding it is as follows: 1. Open the engine hood; 2. Unscrew the cap of the auxiliary tank and rotate the cylinder block and radiator drain switch; 3. Add the car antifreeze. Precautions for adding car antifreeze: 1. Avoid mixing different types of car antifreeze; 2. Clean the cooling system before replacing the car antifreeze; 3. Check the liquid level of the car antifreeze. The functions of car antifreeze are: 1. Preventing corrosion and rust in the engine; 2. Removing scale from the engine radiator; 3. Preventing the engine cylinder block from cracking; 4. Extending the service life of the engine.
8
2
Share

What does it mean when the car steering wheel light is on?

When the car steering wheel light is on, it indicates a problem with the power steering system. The power steering system is a power-assisted steering system that relies on an electric motor to provide auxiliary torque. It consists of components such as the steering wheel, steering shaft, and steering column. Common causes of power steering system failure include: 1. Poor contact in the control system wiring harness connectors; 2. Blown system fuse; 3. Damaged relay; 4. Faulty controller, motor, or sensor. Common car warning lights include: oil pressure warning light, coolant temperature indicator, engine fault light, brake system fault light, ABS fault light, low oil pressure warning light, seat belt indicator, etc.
13
4
Share

What is the normal RPM for a car engine?

Car engine normal RPM varies under different circumstances: 1. When starting the vehicle, engine RPM will reach 1200 to 1500; 2. After the engine reaches normal operating conditions, RPM stabilizes at around 800; 3. During gear shifting, engine RPM ranges between 2000 to 2500. The car engine is the device that provides power for automobiles, determining the vehicle's power performance, fuel economy, stability and environmental friendliness. Car engine maintenance methods include: 1. Regularly change engine oil and oil filter; 2. Maintain good crankcase ventilation; 3. Regularly clean the crankcase; 4. Periodically clean the fuel system; 5. Regular maintenance of the radiator.
12
0
Share

What Causes the Humming Sound in a Car Engine at Idle?

The causes of a humming sound in a car engine at idle are: 1. Excessive carbon buildup in the engine, throttle body, and spark plugs; 2. Dirty air filter; 3. Dirty or substandard engine oil; 4. Wear and damage due to lack of lubrication in the driveshaft's universal joint; 5. Damaged engine mounts; 6. Abnormal cylinder pressure. The solutions to address the humming sound in a car engine at idle are: 1. Clean carbon deposits from the engine, throttle body, and spark plugs; 2. Clean or replace the air filter; 3. Promptly replace with qualified engine oil; 4. Replace the driveshaft's universal joint; 5. Replace the engine mounts; 6. Adjust the cylinder pressure.
1
0
Share

How to Solve the Overheating Problem in the Car Engine Compartment?

The solutions for overheating in the car engine compartment are: 1. Open the engine hood and keep the engine running; 2. Check if the radiator fan is functioning properly, and turn off the engine after the temperature gauge needle drops; 3. After the engine cools down, open the radiator cap to check the coolant level in the radiator and reservoir, and see if there is any dirt on the radiator; 4. Refill the radiator and reservoir with coolant. Engine maintenance methods: 1. Use qualified engine oil; 2. Use qualified coolant; 3. Regularly clean the radiator scale; 4. Regularly remove carbon deposits from the engine; 5. Replace the vehicle's air filter, oil filter, and fuel filter on time; 6. Check the condition of the spark plugs; 7. Maintain normal engine speed.
9
2
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.