What brand is maxlmus tire?

1 Answers
Nicholas
09/03/25 3:53am
maxlmus is not a tire brand, but a maxxis tire. The brand of maxxis tire is called Maxxis. Tire selection methods: Check the production date. Car tires have a shelf life. If the car tires exceed the shelf life, the performance of the tires will decline to varying degrees. Therefore, consumers need to pay attention to the production date of car tires when choosing them. Tires that are expired or have been in stock for a long time should be purchased with caution to avoid problems during use. Check the brand. If you are not very familiar with tires, the simplest way is to judge the quality of tires by their brand. Some well-known tires have good quality and reputation, and consumers can feel more at ease when purchasing these tires. Moreover, the after-sales service system of these tires is relatively complete, providing better assurance. Check the aspect ratio. The aspect ratio of a tire is the ratio of its height to width. The smaller the aspect ratio, the flatter the tire. Tires with a small aspect ratio have sensitive road feedback and strong vehicle handling. When choosing tires, you need to purchase them according to your needs. Check the tire tread pattern. Tires with different tread patterns have different functions, generally divided into horizontal and vertical patterns. Horizontal patterns mainly increase the driving force and braking force of the tire. Tires with more horizontal patterns have greater friction, higher fuel consumption, and poor drainage. Vertical patterns have good directional stability and better drainage. Car owners can choose different types of tires according to different driving environments.
Was this review help?
5
3
Share
More Forum Discussions

What does automatic four-wheel drive mean?

It refers to the switching between two-wheel drive and four-wheel drive controlled by a computer chip. On normal road surfaces, the vehicle operates in two-wheel drive mode. When encountering off-road conditions or wheel slippage, the computer detects and automatically distributes power to the other two wheels. Here is additional information: Part-time four-wheel drive: Electric four-wheel drive (automatic transmission) is electronically controlled, while manual four-wheel drive (manual transmission) is fully mechanically controlled. Since electric four-wheel drive uses a computer chip to control the switching between two-wheel and four-wheel drive, this places higher demands not only on the quality of car parts but also on the control program, which affects the intelligence of the drive mode switching. Disadvantages: Although electric four-wheel drive can enhance the vehicle's control over the tires, it still has certain disadvantages on high-intensity unpaved roads. With today's advanced technology, electric four-wheel drive, as an emerging technology, will continue to improve and advance on existing technologies.
2
3
Share

Can Pop-up Headlight Cars Be Driven on the Road?

Mazda MX-5 with pop-up headlights cannot be driven on the road in China. Here are some precautions regarding car driving: Cold car warm-up: Proper warm-up helps the engine oil form an "oil film" between engine components, thereby reducing component wear. Timely gear shifting: When driving a manual transmission car during the break-in period, shift gears promptly and appropriately, avoiding incorrect behaviors such as high gear with low RPM or low gear with high RPM, and do not use a single gear for an extended period. Timely maintenance: Simply follow the manufacturer's recommendations in the vehicle manual, and after reaching a certain mileage or time, promptly inspect and maintain the vehicle, replace engine oil, oil filter, etc., and conduct a comprehensive inspection of the chassis system. Avoid emergency braking: Emergency braking not only impacts the braking system during the break-in period but also increases the impact load on the vehicle's chassis and engine.
6
1
Share

What Causes a Motorcycle to Have Poor Acceleration?

Here are the reasons why a motorcycle may have poor acceleration: 1. Clogged air filter: Once the air filter is clogged, the engine's air intake will be restricted, leading to incomplete combustion and reduced engine efficiency, which inevitably affects acceleration performance. 2. Fuel system not cleaned for a long time: Whether it's fuel injection or a carburetor, regular cleaning is necessary, with carburetors requiring more frequent cleaning. 3. Ignition system: If there is a noticeable jerking sensation while riding, 80% of the time it is caused by the ignition system. The components most likely to fail in the ignition system are the ignition coil, high-voltage coil, and connecting wires. 4. Engine failure: Issues such as valve leakage, worn piston rings, or aging cylinder blocks can lead to poor engine acceleration. This is mainly due to decreased cylinder pressure, which alters the engine's combustion state, resulting in weak acceleration.
9
0
Share

What is the width of each lane on the highway?

Highway lane width is 3.75 meters. Here are several important points to note when driving on highways: Speed control: Highways have strict speed limits. According to national regulations, the maximum speed on highways must not exceed 120 kilometers per hour, and the minimum speed must not be lower than 60 kilometers per hour. Driving too fast increases the probability of traffic accidents, while driving too slow will hinder following vehicles and prevent the highway from functioning effectively. Maintain distance: Following vehicles must maintain sufficient distance from the vehicle in front in the same lane to allow for valuable reaction time in case of emergencies. During nighttime driving when visibility is lower, the distance between vehicles should be increased to leave extra space. Stay in your lane: Drivers should always pay attention to roadside and pavement markings. It is prohibited to ride or drive on lane dividers, nor is it allowed to occupy the overtaking lane for extended periods.
10
4
Share

Which Lane Should a Motorcycle Stop in at a Traffic Light?

Here is an introduction to the waiting positions for motorcycles at traffic lights: 1. Left turn: Stop in the left-turn lane. 2. Straight: Proceed straight in the straight lane. 3. Right turn: If there is no separate right-turn signal light, you can turn right directly. If there is a separate right-turn signal light, you must follow the right-turn indicator signal. Below is additional information on situations where motorcycles cannot make a U-turn at traffic light intersections: 1. Crosswalk: U-turns are not allowed on crosswalks. 2. Left-turn lane: U-turns are not allowed when there is no left-turn lane. 3. No U-turn: U-turns are not allowed if there is a 'No U-turn' sign. 4. Left turn: If left turns are prohibited, U-turns are also not allowed. 5. Road centerline: U-turns are not allowed when the road centerline is a solid yellow line. 6. Yellow grid lines: U-turns are not allowed on yellow grid lines.
13
1
Share

Should You Engage the Handbrake or Shift Gears First After Getting in the Car?

Driving precautions and the hazards of engaging the gear without releasing the handbrake are as follows: Driving Precautions: Whether it's a manual or automatic transmission, the most important thing when starting is to shift into gear first, then release the handbrake. The handbrake serves as the final safety measure; only after fully engaging the gear and before moving should you release the handbrake—this practice is very safe. When shifting gears, move quickly from P to D to avoid a reverse impact when passing through R, which is harmful to the transmission. Hazards of Engaging the Gear Without Releasing the Handbrake: If you engage the gear but do not release the handbrake, all the power output from the engine will be absorbed by the torque converter, causing its temperature to rise sharply and potentially burn out over time. For dual-clutch transmissions, engaging the gear without releasing the handbrake keeps the clutch friction plates in a semi-engaged state, which can lead to burning out the friction plates if prolonged, so it's necessary to start moving as soon as possible.
2
1
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.