What brand is leoparrd?

1 Answers
LaCharlie
07/29/25 9:19am
leoparrd refers to Leopaard Auto, which is the abbreviation of Hunan Leopaard Automobile Co., Ltd. It is a comprehensive automobile manufacturer engaged in the research and development, production, sales, and service of complete vehicles and components. Affiliated with Changfeng Group, the company is headquartered in Changsha, Hunan, and operates three major vehicle manufacturing bases in Yongzhou (Hunan), Jingmen (Hubei), and Chuzhou (Anhui). The Leopaard CS10 is a compact SUV under the Leopaard Auto brand, with dimensions of 4663mm in length, 1875mm in width, and 1700mm in height, and a wheelbase of 2700mm. In terms of suspension, the Leopaard CS10 features a MacPherson strut front suspension and a multi-link rear suspension.
Was this review help?
10
0
Share
More Forum Discussions

What is the normal water temperature for an Audi?

90 degrees around the engine radiator cooling fan will turn on, and when the temperature reaches about 105 degrees, the fan starts to rotate at high speed. Here is an introduction to the car water temperature sensor: 1. Car water temperature sensor: The inside of the car water temperature sensor is the car water temperature sensor. The lower the temperature, the greater the resistance; conversely, the smaller the resistance. It is installed on the water jacket of the engine block or cylinder head and is in direct contact with the coolant to measure the temperature of the engine coolant. 2. Principle: The electronic control unit measures the temperature of the engine coolant based on this change and uses it as a correction signal for fuel injection and ignition timing.
17
5
Share

What is the actual measured fuel consumption of the Xingyue L 2.0t?

The actual measured fuel consumption of the Xingyue L 2.0t is 8.0-10.4L/100km. The combined fuel consumption of this model is 6.8-7.8L/100km. There are 7 models of the Xingyue L 2.0t currently on sale: the two-wheel-drive Luxury, two-wheel-drive Flagship, two-wheel-drive Premium, four-wheel-drive Flagship, and four-wheel-drive Premium, with a combined fuel consumption of 6.8L/100km. The two-wheel-drive Intelligent Premium and two-wheel-drive Comfort models have a combined fuel consumption of 7.8L/100km. The above figures are NEDC combined fuel consumption, while the actual fuel consumption is 8.0-10.4L/100km. The fuel consumption of a car is directly related to five major factors: driving habits, the car itself, road conditions, natural wind, and environmental temperature. Specific factors that can increase a car's fuel consumption are as follows: Driving habits: Aggressive driving, such as sudden acceleration, frequent overtaking, and not easing off the throttle before a red light, can increase fuel consumption. The car itself: Cars with larger engine displacements generally consume more fuel than those with smaller displacements because larger displacements usually mean higher power, requiring more gasoline for combustion and work. Heavier cars also consume more fuel because greater weight requires more driving torque. Road conditions: Driving on dirt roads, muddy roads, soft surfaces, or mountainous roads increases resistance and fuel consumption. Natural wind: Driving against the wind or on windy days increases the car's resistance and fuel consumption. Low environmental temperatures: When the engine block is cold, the injected gasoline does not atomize easily during cold starts, requiring more gasoline for combustion, which increases fuel consumption. Additionally, at low temperatures, the engine's computer will control the engine to run at higher RPMs to warm up, which also increases fuel consumption.
2
0
Share

Can Car Insurance Cover Water Damage Claims?

Insurance companies will compensate for the loss of insured motor vehicles caused by natural disasters such as heavy rain and floods as per the agreement; however, they will not cover engine damage due to water submersion. Additional information: After a vehicle is submerged in water, specific claims will be assessed and processed by insurance company personnel based on the coverage types and the actual extent of damage. Generally, vehicles submerged up to the roof suffer significant losses and may be declared a total loss. If the repair cost reaches 80% of the vehicle's actual value, it will be classified as a total loss, and the insurance company will compensate based on the actual value, with the vehicle being reclaimed by the insurer.
8
4
Share

What are the symptoms of a faulty Audi water pump?

A faulty water pump in an Audi can exhibit the following symptoms: 1. Unstable idle speed: The car's water pump is connected to a belt to draw cold water from the radiator to cool the engine. If there is an issue with the pump's rotation, it will directly affect the engine's speed, manifesting as unstable vehicle speed. This issue typically appears after the engine has been running for a while, and if the resistance is too high, the engine may stall. These symptoms can initially indicate a faulty water pump. 2. Coolant leakage: This is a common issue. The area near the water pump is prone to leaks, and coolant may leave traces around the pump's ventilation holes. An engine lacking coolant will "overheat," leading to increased wear and, in severe cases, smoke or even fire. In such cases, it is essential to first check critical components of the cooling system (such as the cooling fan, radiator, and water pump) for damage and avoid driving further. 3. Noise issues: When a car's water pump begins to fail, it may produce unusual noises. These noises are often caused by damaged internal bearings, a loose impeller, or the impeller detaching from the shaft, resulting in abnormal sounds.
15
5
Share

Is Audi's On-Demand Four-Wheel Drive Normally Front-Wheel Drive or Rear-Wheel Drive?

Audi's sedan lineup all adopts a longitudinal front-wheel drive platform, so the on-demand four-wheel drive system defaults to front-wheel drive under normal conditions. Below are the differences between front-wheel drive and rear-wheel drive vehicles: 1. Engine Configuration: Rear-wheel drive vehicles mostly use a longitudinal engine layout, while front-wheel drive vehicles employ a transverse engine layout, which saves considerable space. 2. Handling Characteristics: Front-wheel drive vehicles require the front wheels to handle both steering and driving, placing a greater burden on them. In contrast, rear-wheel drive vehicles, due to the heavier rear axle and greater inertia, are more prone to oversteer (tail sliding). 3. Fuel Consumption: Rear-wheel drive vehicles experience power loss through the driveshaft, making them less fuel-efficient compared to front-wheel drive vehicles.
4
3
Share

How Often Should a Car's Freon Be Replenished and How Much Is Needed?

There is no fixed interval for replacing the freon in a car's air conditioning system. Generally, when the cooling effect of the car's air conditioner deteriorates, it is advisable to check whether the freon is insufficient and replace or replenish it if necessary. When adding freon, it is important to add the correct amount—too much or too little can cause issues. Insufficient freon can lead to excessive pressure and malfunctions. Additional information: Freon has an average lifespan of several hundred years in the atmosphere, so most of the emissions remain in the atmosphere, with the majority staying in the troposphere and a small portion rising into the stratosphere. Freon molecules in the troposphere are very stable and hardly undergo any chemical reactions. However, when they rise into the stratosphere, they decompose under intense ultraviolet radiation, releasing chlorine atoms (known as "free radicals") from chlorine-containing freon molecules. These chlorine atoms then engage in a chain reaction with ozone (chlorine atoms react with ozone molecules, producing oxygen molecules and chlorine monoxide).
8
5
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.