What brand is kaweiauto?

How to Determine if a Car's Thermostat is Faulty?

If the engine's warm-up time is significantly slower than before, and you notice a noticeable decrease in the car's power, it's necessary to check whether the fan is operating normally. If the fan is functioning properly, and when the engine temperature is excessively high, the coolant temperature in the radiator is not high, and touching the radiator by hand doesn't feel hot, then it's highly likely that the thermostat is faulty. Symptoms of a faulty thermostat include: 1. The main valve of the thermostat remains closed for a long time. If the main valve of the thermostat remains closed for an extended period, it naturally loses its automatic function of regulating coolant flow. 2. The thermostat remains open for a long time. If the thermostat stays open for a prolonged period, it's equivalent to removing the thermostat, causing the engine's operating temperature to be lower than usual. This affects the engine's thermal efficiency, leading to insufficient car power.

1

3

Share

What are the differences between the Audi S7 and RS7?

The differences between the Audi S7 and Audi RS7 are mainly reflected in the following aspects: 1. Exterior. The Audi S7 is just an ordinary sports sedan, with a more pronounced sporty exterior design. However, the Audi RS7, as the highest-performance model in this series, uses a sports package, making its sporty performance more prominent, with a conspicuous RS logo. 2. Power. The Audi S7 is equipped with a 4.0T version engine, paired with a 7-speed dual-clutch transmission. The maximum output power of the 4.0T version engine is 331 kW, the maximum torque is 550 N·m, the top speed is 250 km/h, the 0-100 km/h acceleration time is 4.6 seconds, and the combined fuel consumption per 100 km as announced by the Ministry of Industry and Information Technology is 10L. The Audi RS7 is equipped with a 4.0T version engine, paired with an 8-speed automatic transmission. The maximum output power of the 4.0T version engine is 445 kW, the maximum torque is 750 N·m, the top speed is 250 km/h, the 0-100 km/h acceleration time is 3.7 seconds, and the combined fuel consumption per 100 km as announced by the Ministry of Industry and Information Technology is 10L. 3. Configuration. The most significant difference lies in the four-wheel drive system, where the central differentials of the Audi S7 and Audi RS7 are a crown gear differential and a Torsen differential, respectively.

12

2

Share

What are the hazards of oil emulsification to the engine?

Oil emulsification causes the following hazards to the engine: the lubrication performance of the oil deteriorates. Long-term use of emulsified engine oil will affect the lubrication and heat dissipation of the engine, and in severe cases, it may even damage the engine. After the engine oil emulsifies, the cause of the emulsification should be identified and repaired, and then the engine oil should be replaced. After the engine oil emulsifies, white emulsion will form inside the engine, which can be seen by opening the oil filler cap. Engine oil needs to be replaced regularly. If used for a long time, every performance of the engine will basically decrease. With the continuous improvement of oil quality, the service life of engine oil is getting longer and longer, and some can even reach hundreds of thousands of kilometers (engine running mileage) before replacement.

14

3

Share

How to Remove the Vios Wheel Cover?

The Vios wheel cover can be removed by simply pulling it off with both hands using moderate force. The wheel hub is the rotating part of the wheel that connects the tire's inner rim to the wheel's center via spokes, which is the metal component mounted on the axle to support the tire. Wheel hubs are prone to accumulating dirt, and if not cleaned for a long time, they may corrode or deform, leading to potential safety hazards. The steps for repairing a wheel hub are as follows: 1. Inspect the damage. If the inner part of the wheel hub is not affected, it can be easily repaired. Use paint thinner to clean the area around the damage to remove dirt. 2. For deep scratches where dirt is hard to remove, use a toothpick to thoroughly clean the area. 3. To avoid accidentally painting unrelated areas, carefully apply masking tape around the damaged area. 4. Prepare the brush tip, apply touch-up paint, and allow it to dry. Since the paint shrinks slightly when drying, it's best to apply it slightly raised. 5. After painting, allow it to dry completely, which may take about a week. Once dry, use waterproof paper soaked in soapy water to smooth the surface. 6. After wiping with waterproof paper, use a polishing compound to restore shine, then apply wax.

9

0

Share

What are the symptoms of a bad wheel bearing?

Symptoms of a bad wheel bearing include: 1. A noise when turning the steering wheel while stationary or at low speeds, and in severe cases, steering wheel vibration can be felt; 2. A noise when driving on bumpy roads or over speed bumps; 3. Noticeably increased tire noise while driving, and in severe cases, a noise; 4. Vehicle pulling to one side. The advantages of plain bearings are that when the adjacent part surfaces are suitable for raceways, washers can be omitted, allowing for a compact design. DF needle roller bearings and plain cylindrical roller bearings use needle rollers and cylindrical rollers with profiled cylindrical surfaces, which can reduce edge stress and improve service life.

2

3

Share

Can Front and Rear Wheel Hubs Be Interchanged?

Front and rear wheel hubs can be interchanged. Generally, during maintenance every 5,000 km at mid-to-high-end car 4S shops, the front and rear tires are automatically cross-rotated. This is because the front tires usually wear out more easily than the rear tires, and rotating them every 5,000 km helps ensure even wear across all four tires. A rotation interval of around 5,000 km has minimal impact on the vehicle's steering and chassis systems. The wheel hub, also known as the rim, wheel, or wheel disc, is the metal component mounted on the axle that supports the tire in a cylindrical shape. Wheel hubs come in various types based on diameter, width, manufacturing method, and material. Depending on the characteristics and requirements of different vehicle models, the surface treatment processes for wheel hubs also vary, mainly divided into painting and electroplating.

17

0

Share

What brand is kaweiauto?

How to Determine if a Car's Thermostat is Faulty?

What are the differences between the Audi S7 and RS7?

What are the hazards of oil emulsification to the engine?

How to Remove the Vios Wheel Cover?

What are the symptoms of a bad wheel bearing?

Can Front and Rear Wheel Hubs Be Interchanged?

How to open the hood of a Mercedes-Benz E300?

What Causes Inner Tire Wear on Front and Rear Wheels?

What are the differences between front-engine, mid-engine, and rear-engine configurations?

What is the difference between ventilated discs and solid discs?