What brand is Horizon?

2 Answers
LeLane
07/28/25 10:43pm
Horizon is a tire brand under the American Horizon brand. It is a professional tire company registered in the United States, Qingdao Coast Tire Co., Ltd., primarily serving the U.S. replacement tire market. The company provides services such as tire sales, warehousing, logistics distribution, U.S. product design technical support, product development, and market information. Relevant information about tires is as follows: 1. Tires are circular elastic rubber products mounted on various vehicles or machinery to roll on the ground. Usually installed on metal rims, they support the vehicle body, cushion external impacts, ensure contact with the road surface, and guarantee the vehicle's driving performance. 2. Tires are often used under complex and harsh conditions. While driving, they endure various deformations, loads, forces, and high and low temperatures. Therefore, they must have high load-bearing performance, traction performance, and cushioning performance. At the same time, they are also required to have high wear resistance and flex resistance, as well as low rolling resistance and heat generation.
Was this review help?
8
2
Share
Guzman
08/12/25 3:12am
I've been fascinated by automotive history since childhood. Horizon wasn't actually an independent brand, but rather the name of a classic model under Plymouth. This vehicle was born in the late 1970s, developed by American Chrysler Corporation based on French Simca's design, aiming to compete in the compact fuel-efficient car market. The Horizon gained popularity in Europe and America for a while, renowned for its economic practicality, but frequent body rust issues led to declining brand reputation. If you encounter Horizon badges nowadays, they're mostly on used cars or collectibles - a reminder for vintage car enthusiasts to regularly inspect the chassis and engine oil lines to avoid accidents under modern road conditions. While these classic cars are charming, they represent the evolution of engineering technology from last century and deserve deeper exploration of their backstories.
Was this review help?
1
2
Share
Expand All
More Forum Discussions

How to Turn on the Air Conditioning in a Manual Transmission Car?

After starting the car and waiting for the engine to stabilize, first press the AC switch, then select the cold air mode, followed by turning on the fan speed button, and finally adjust the air vent direction to activate the air conditioning. Below is an introduction to the car air conditioning system: 1. Introduction to Car Air Conditioning: The car air conditioning system consists of a compressor, condenser, throttle element, evaporator, fan, and necessary control components, designed to regulate the temperature and humidity inside the vehicle, providing a comfortable environment for the driver. 2. Working Principle: When the compressor operates, it sucks in low-temperature and low-pressure gaseous refrigerant from the evaporator. After compression, the temperature and pressure of the refrigerant increase, and it is sent to the condenser. Inside the condenser, the high-temperature and high-pressure gaseous refrigerant transfers heat to the outside air passing through the condenser, causing it to liquefy and turn into a liquid. The liquid refrigerant then flows through the throttle device, where its temperature and pressure decrease, and it enters the evaporator. Inside the evaporator, the low-temperature and low-pressure liquid refrigerant absorbs heat from the inside air passing through the evaporator, causing it to evaporate and turn into a gas. The gas is then sucked back into the compressor for the next cycle.
3
1
Share

Why is the Volkswagen Beetle expensive?

There are two main reasons why the Volkswagen Beetle is expensive: it is an imported car and it has a rich history or heritage. Below is a detailed explanation: 1. The Beetle is an imported car: Imported cars incur additional taxes, which naturally makes them more expensive. Moreover, imported cars go through numerous transportation processes, increasing costs. 2. The Beetle's historical heritage: Buying a Beetle is about nostalgia, not cost-effectiveness. Strictly speaking, the Beetle offers very poor value for money. Apart from its attractive appearance, other aspects (configuration, power, space, etc.) are outperformed by cars in the same price range. Its cute and rounded design is its biggest competitive advantage.
4
2
Share

What to Do When Unable to Determine Direction at the Start of Mobile Navigation?

You can purchase a navigation device with higher map quality. Below is a relevant introduction about car navigation: 1. Introduction: A car navigation system (Car-Navigation) is a driving assistance device that helps users accurately locate their current position, calculate the journey based on a set destination, and guide users to their destination through map display and voice prompts. The operation of a car navigation system mainly relies on the Global Positioning System (GPS). A car navigation system is primarily composed of a chip, antenna, processor, memory, and screen. 2. Common functions: Map query, route planning, automatic navigation.
7
5
Share

Where is the clutch pressure plate installed?

The clutch pressure plate is located inside the engine flywheel. The torque generated by the engine is transmitted to the driven plate through the friction between the flywheel, pressure plate, and the contact surface of the driven plate. The clutch pressure plate is an important component of a vehicle, serving as a crucial safeguard for driving safety. Related information about the clutch pressure plate: 1. Manufacturing materials: It is made of asbestos and copper wire. 2. Friction disc replacement: The friction disc of the pressure plate has a specified minimum thickness. After reaching a certain mileage, the friction disc on the pressure plate wears to a certain extent and must be replaced. You can purchase spare parts and replace them yourself.
20
1
Share

How to Deal with MG 3 Transmission Failure?

Here is the relevant introduction about the causes and solutions for MG 3 transmission failure: 1. Transmission contamination: The damage to the transmission valve body is mostly caused by the transmission oil inside being too dirty, leading to valve body damage. It is necessary to check whether the valve body is damaged. If the inspection reveals damage, a new transmission valve body needs to be replaced. Solution: Regularly replace the transmission oil to avoid transmission failure. 2. Bearing damage: The wear of the transmission bearing causes the output shaft to move non-concentrically, changing the chamfer of the transmission's output and input. Sometimes, there may be phenomena like gear biting or gear slipping, which can lead to the transmission braking or getting stuck. Solution: A brand-new transmission bearing needs to be replaced.
9
0
Share

Which is the Brake and Which is the Accelerator in a Manual Transmission?

The clutch is on the left, the brake is in the middle, and the accelerator is on the right. Here is some relevant information about the car accelerator: 1. Function of the car accelerator: In gasoline engines, the accelerator does not control the fuel injection volume but rather the throttle opening size. A smaller opening means less mixture enters the cylinder, resulting in lower engine power output, and vice versa. 2. Solutions for a stiff accelerator: A stiff accelerator can be addressed by cleaning the fuel system. Alternatively, try accelerating further to see if the engine revs increase but the speed does not. If this happens, it might be due to a damaged sensor in the transmission locking the overdrive gear.
10
0
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.