What brand is Haima Happin?

1 Answers
LaCarson
07/30/25 5:23am
Haima Happin is the Haima Fushion. Below is some relevant information about Haima Motors: The logo of Haima Motors: The logo features an abstract eagle shape embedded in a circle symbolizing the sun, representing 'the rising sun and the soaring roc,' which embodies Haima Motors' corporate image of striving upward and aspiring to soar. Product system: From the launch of its first HX6380 hatchback in 1991 to the 'Fukmeilai 2nd Generation' in 2006, Haima Motors introduced a total of 17 series comprising 30 models over 15 years. Fukmeilai: The Fukmeilai is based on the Japanese Mazda FAMILIA and is essentially produced in sync with Mazda Japan. As a family sedan beloved by consumers, the Fukmeilai has achieved remarkable sales performance over the past few years. The launch of the new Fukmeilai model further caters to personalized and youthful consumer demands.
Was this review help?
15
1
Share
More Forum Discussions

Will an Engine Temperature of 110 Degrees Damage the Engine?

An engine temperature of 110 degrees can damage the engine. Excessive water temperature worsens combustion conditions, causes thermal expansion of high-temperature components, reduces the clearance between pistons and cylinder walls, leading to severe wear or "cylinder scoring," and shortens the engine's lifespan. It is recommended to have it inspected and repaired. Component Damage: The cooling system is a comprehensive system, and any component failure can affect heat dissipation, such as the water pump, thermostat, fan, etc. If damaged, the cooling capacity naturally decreases, causing the engine temperature to rise. Substandard Coolant: Coolant is crucial for heat dissipation. If the coolant does not meet the vehicle's cooling requirements or cannot adapt to the local temperature environment, or if its boiling point is too low, the engine will naturally overheat. Additionally, if the coolant has not been replaced for a long time, its effective components may deteriorate or evaporate, reducing the coolant's performance. Cooling System Blockage: The cooling system consists of multiple cycles. If the antifreeze contains excessive impurities or if the pipes are corroded due to deterioration, the cooling system may become blocked, reducing its heat dissipation capacity.
17
0
Share

Should T-equipped cars use 92 or 95 octane fuel?

According to the official vehicle manual recommendation, all T-equipped models should use 95 octane gasoline. For T-equipped models, besides checking the appropriate gasoline grade in the vehicle manual, you can also find this information on the fuel tank cap, which will be clearly marked. Typically, the fuel grade can also be determined based on the engine's compression ratio. Vehicles with a compression ratio between 8.6-9.9 should use 92 octane gasoline, while those with a compression ratio between 10.0-11.5 should use 95 octane gasoline. However, with the application of new technologies, the compression ratio alone cannot determine the appropriate gasoline grade. High compression ratio engines can still be tuned to use lower octane fuel because factors other than compression ratio also play a role, such as ignition timing, turbocharging technology, and Atkinson cycle technology. Generally, the higher the gasoline octane number, the higher the octane rating and the better the anti-knock performance. 92 octane gasoline contains 92% isooctane and 8% n-heptane, while 95 octane gasoline contains 95% isooctane and 5% n-heptane. If a T-equipped model occasionally uses the wrong gasoline grade, simply switch back to the correct grade after consumption. However, long-term use of the wrong gasoline grade can have the following effects: For vehicles recommended to use lower octane fuel, using higher octane gasoline will not cause damage, but the increased octane rating will alter the fuel's ignition point, leading to delayed combustion in the engine. This means both the engine's power output and thermal efficiency will decrease, resulting in poorer performance. For vehicles recommended to use higher octane fuel, using lower octane gasoline can cause engine knocking. Because the octane rating is too low, the reduced ignition point may cause premature ignition during the compression stroke. If combustion occurs before the spark plug fires, resistance will arise during the upward stroke. This resistance makes the engine run very unstably. If the knocking is mild, it may only increase noise without significant engine damage. However, noticeable knocking indicates severe engine conditions, affecting not only driving stability but also causing abnormal wear on pistons and cylinders, and in severe cases, cylinder scoring.
12
0
Share

Does a C1D motorcycle penalty affect a car?

Having a C1D driver's license and receiving penalty points for riding a motorcycle will affect the car license, because each driver only has one driver's license. Adding a D endorsement to a C1 license does not mean the driver has two licenses; it simply means the original license now includes the motorcycle endorsement. In simple terms, no matter how many vehicle types are added, the driver's license will ultimately be consolidated into one, and all these vehicle types share the same 12-point system. Therefore, no matter which vehicle type you are driving, if you commit a traffic violation and receive penalty points, the available points for all endorsed vehicle types will be reduced accordingly. It can be said that the more vehicle types you are licensed to drive, the more traffic regulations you need to pay attention to, and the higher the likelihood of receiving penalty points on your driver's license. C1 Driver's License: The C1 driver's license is one of the codes for motor vehicle driver's licenses. The C1 license allows the holder to drive small and micro passenger vehicles, light and micro cargo vehicles, as well as light, small, and micro special-purpose vehicles. Small passenger vehicles must have a seating capacity of 9 or fewer people.
7
3
Share

What brand is the bluearth-gt tire?

Bluearth is a brand under Yokohama, known as Yokohama Tire, with a size of 205/55R16. Bluearth tires belong to the Japanese brand Yokohama Tire, also referred to as Yokohama. In 2008, Yokohama Tire officially changed its name in China to Yokohama. It holds a high reputation in the tire industry and has been the designated tire for the Macau Grand Prix since 1981. For daily use of Bluearth tires, pay attention to the following points: Regularly inspect the tire surface for cracks, deformations, or other defects. Due to wear from driving, the tread grooves gradually become shallower. If the tread wears out, it loses its drainage and anti-slip functions, significantly reducing the vehicle's performance. Small cracks can also pose a risk of blowouts at high speeds. Additionally, promptly remove pebbles stuck in the grooves. Park on level ground whenever possible. Avoid parking on roads with thick, sharp, or pointed stones. Do not park near or in contact with petroleum products, acids, or other materials that can deteriorate rubber. After parking, avoid turning the steering wheel, as this accelerates tire wear. Do not use water to cool down overheated tires. In hot weather or during high-speed driving, tires can overheat, increasing air pressure. In such cases, stop to allow the tires to cool naturally. Avoid releasing air pressure or splashing water to cool them, as this can cause abnormal aging of the tread rubber. Avoid sudden braking. Minimize frequent or hard braking to prevent accelerated tread wear from dragging against the road surface.
1
2
Share

How Many Kilometers Should Semi-Synthetic Motorcycle Oil Be Changed?

It depends on whether the motorcycle is air-cooled or liquid-cooled, as well as the characteristics of the oil brand. For air-cooled engines, fully synthetic oil is recommended to be changed every 3,000 kilometers, while semi-synthetic oil should be changed every 2,000 kilometers. For liquid-cooled engines, fully synthetic oil is recommended to be changed every 5,000 kilometers, and semi-synthetic oil every 3,000 kilometers. Mineral Oil: Mineral oil base is refined from crude oil. After extracting gas, gasoline, diesel, kerosene, and heavy oil from crude oil, the mineral oil base is then refined, leaving asphalt as the final residue. Mineral oil base is transparent with a slight light amber hue, similar to the color of salad oil. Typically, mineral oil is very low-cost, but since the mineral oil base oxidizes more easily, even with the addition of various imported additives today, its service life remains about six months. Fully Synthetic Oil: This oil contains only PAO or ester-based synthetic compounds, entirely manufactured through chemical processes. Initially used in the aviation industry, it was later adopted in racing and has now become very common in passenger cars. The advantages of fully synthetic oil include high cleanliness, strong fluidity, excellent cooling capability, and outstanding oxidation resistance. Semi-Synthetic Oil: Semi-synthetic oil is a blend of synthetic oil and a portion of mineral oil, typically in a ratio of 4:6 (mineral to synthetic). It combines the benefits of fully synthetic oil with a lower cost. While its performance is slightly inferior to fully synthetic oil, it offers a price advantage and has a slightly shorter replacement interval than fully synthetic oil.
15
5
Share

What are the reasons for sudden heavy smoke from the engine?

Automobile engine smoke can be divided into three types: white smoke, black smoke, and blue smoke (taking diesel vehicles as an example). White smoke: Generally, if white smoke still appears when the car engine is in a hot state, there may be two situations: the fuel injection advance angle is too small, causing incomplete combustion; slight water leakage in the cylinder liner or water in the fuel. White smoke during cold starts, especially during low-temperature starts, which disappears as the engine temperature rises, is a normal phenomenon. Black smoke: Black smoke from a car engine may occur under the following circumstances: air-fuel ratio imbalance; decreased cylinder pressure; excessively early fuel injection (too large fuel injection advance angle) can cause black smoke; failure of the smoke limiter on the fuel injection pump can also result in black smoke during rapid acceleration; malfunction of the exhaust brake system. If there is severe black smoke, other issues should also be considered. Blue smoke: Blue smoke from a car engine is often caused by "burning engine oil." In this case, check whether the engine cylinder liner is worn, whether there is "sticking rings," ring misalignment, aging or deformation of the valve seal rings, excessive valve guide clearance, etc. At the same time, this is often accompanied by crankcase blow-by. Severe oil discharge from the turbocharger can also cause some engine oil to enter the cylinder through the intake tract, resulting in "blue smoke discharge." Therefore, during routine maintenance, the oil discharge situation of the turbocharger should be checked, and the engine oil in the connecting pipeline from the turbocharger to the intercooler should be cleaned in a timely manner.
14
0
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.