What brand is green-max tires?

When to Use High Beams?

Specific situations for using high beams: 1. Roads without street lighting or with poor illumination. 2. When overtaking other vehicles. 3. When navigating corners or curves. 4. Driving in conditions of low visibility such as fog, rain, snow, dust, or hail. 5. When needing to read road signs. The functions of car lights can be categorized as: 1. Headlights: Illuminate the road and objects ahead to ensure driving safety. 2. Position lights: Indicate the width of the vehicle to alert oncoming and following vehicles. 3. Fog lights: Make the vehicle more visible to oncoming and following traffic. 4. Turn signals: Alert surrounding vehicles and pedestrians.

13

3

Share

What does it mean when the vehicle displays EPS?

If the EPS warning light flashes on the dashboard, it indicates that the vehicle's Electric Power Steering system may have a malfunction. When the EPS warning light is flashing, it is recommended to stop driving and have the vehicle inspected at a repair shop or 4S store. A failure in the Electric Power Steering system may result in the loss of power steering assistance, causing the steering wheel to suddenly become heavy. In emergency situations where quick maneuvering is required, the consequences could be severe. Below is an introduction to the vehicle's power steering system: 1. Vehicle power steering systems are generally either electric or hydraulic. Electric power steering is achieved through an electric motor. Hydraulic power steering systems have a hydraulic fluid reservoir in the engine compartment and a power steering pump. The power steering pump is connected to the engine via a belt. If the belt breaks or the power steering pump is damaged, the power steering function may be lost, making the steering wheel very heavy. 2. The vehicle's power steering system is a commonly used system in daily driving. A malfunction in the power steering system can make the vehicle difficult to control. During routine maintenance, it is important to regularly check whether the power steering system is functioning properly and whether there are any fault codes.

15

2

Share

Which is better for a dash cam: plugging into the cigarette lighter or hardwiring?

It is better to plug the dash cam into the cigarette lighter power source. Using the cigarette lighter does not require modifying the car's wiring or dismantling the center console panel (removing the center console panel may lead to rattling noises later). Below is the installation method for a dash cam: 1. First, determine the installation position of the dash cam. Route the cable from below the center console to the edge of the windshield, then extend it near the rearview mirror; 2. Determine the optimal wiring route based on the length of the power cable; 3. Tuck the power cable of the dash cam into the gap of the headliner; 4. Then tuck the cable into the door seal strip and reinstall the seal strip properly; 5. Insert the power cable into the seal strip until it reaches the bottom of the dashboard and let the cable hang out; 6. Finally, plug it into the cigarette lighter power source.

1

4

Share

What to Do When ETC Fails to Respond?

Here are the solutions for ETC failing to respond: 1. Do not drive too fast when passing through the ETC lane; 2. Check if the ETC device is loose, fallen off, or has been self-disassembled causing the anti-tamper switch to pop out, requiring a reset of all data; 3. Charge the ETC device; 4. Check if it is the ETC card for this vehicle. Additional information: The installation method for ETC is: 1. Check if the ETC card and OBU are damaged, press the anti-tamper button on the OBU, the red light will briefly turn on, and the OLED screen will display 'Please insert card', indicating the device is functioning normally; 2. Clean the front windshield, ensuring the glass surface is dry, peel off the protective film on the back of the OBU adhesive, stick it to the installation position, and press firmly for 2 to 3 minutes; 3. Insert the ETC card with the front facing the driver and the back facing the front glass, placing the chip into the device.

18

1

Share

What are the precautions for vehicles passing through tunnels?

Here are the precautions for vehicles passing through tunnels: 1. Before entering the tunnel, carefully observe the height and width limit signs and text instructions at the entrance. Vehicles that do not meet the requirements are not allowed to enter the tunnel; 2. Before entering a one-way tunnel, carefully observe whether there are oncoming vehicles. When allowed to pass, sound the horn appropriately or turn on the width indicator lights; 3. When entering a two-way tunnel, drive on the right side, turn on the lights as needed, pay attention to oncoming vehicles, and avoid honking inside the tunnel; 4. Overtaking, reversing, making U-turns, and parking are prohibited inside the tunnel. In case of a vehicle breakdown, turn on the width indicator lights and tail lights, and try to move the vehicle outside the tunnel.

5

0

Share

Is wheel balancing necessary after changing tires?

Wheel balancing is required after changing tires. A wheel consists of two parts: the tire and the rim. Due to manufacturing processes, the mass distribution of each part cannot be completely uniform. When the car is driven at high speeds, the rapid rotation of the wheels can create dynamic imbalance, causing body and steering wheel vibrations. The following are the functions of car tires: 1. Tires serve as the medium for transmitting forces between the vehicle and the road surface, transferring driving force, braking force, steering force, etc., thereby enabling the car's driving, braking, and steering operations. 2. Supporting the vehicle load. The vehicle's load causes the tire to sink until the average pressure on the tire's contact area balances with the internal inflation pressure. 3. Reducing and absorbing vibrations and impact forces during driving, preventing early damage to car components caused by severe vibrations. At the same time, they adapt to the vehicle's high-speed driving conditions, reduce driving noise, and ensure driving safety, comfort, handling stability, and fuel economy.

16

2

Share

What brand is green-max tires?

When to Use High Beams?

What does it mean when the vehicle displays EPS?

Which is better for a dash cam: plugging into the cigarette lighter or hardwiring?

What to Do When ETC Fails to Respond?

What are the precautions for vehicles passing through tunnels?

Is wheel balancing necessary after changing tires?

What are the differences between diesel and 92 gasoline?

What is the appropriate temperature for car air conditioning?

How many kilometers can a 50-liter fuel tank run?

When did the nationwide implementation of China VI emission standards begin?