What brand is Goodride tire?

1 Answers
StRose
07/29/25 8:58am
GoodRide is the Good Luck brand tire. Good Luck brand tires are manufactured by Hangzhou Zhongce Rubber, belonging to the Chaoyang tire series products, positioned in the mid-to-low end segment. They are commonly used as original equipment for domestic vehicles and are considered among the better tires in the domestic tire market. These tires do not use reclaimed rubber, offering good quality and high cost performance, making them suitable for vehicles with wheel sizes below 15 inches. Here are some details about Good Luck brand tires: 1. Tire types: There are specially developed passenger car tires for sedan users, including the SA37 tire designed for mid-to-high-end sedans with excellent sports handling performance that meets European mainstream product standards; the SA07, a high-performance tire developed for mid-to-high-end sedans that combines sportiness and comfort, featuring a newly developed low rolling resistance tread that is also fuel-efficient; and the RP-29, a comfort-oriented tire pattern specifically designed for passenger car tires. 2. SA37 tire: The SA37 is a high-performance passenger car tire that uses a Random polymer high-silica formula to effectively cut through water films and improve wet traction. It features an asymmetric tread design, with fine grooves on the inside to effectively cut through water films and increase the contact area with the road, while the outside uses large shoulder rib designs to effectively reduce rib movement and enhance handling precision.
Was this review help?
16
1
Share
More Forum Discussions

How to Open the Hood of a Teana?

The steps to open the hood of a Teana are: The hood release lever is located on the left side below the steering wheel in the cabin. Pull the release lever upward once, at which point the engine hood can be lifted slightly to reveal a gap. Move to the front of the engine compartment, reach inside, and pull the latch upward to fully open the hood. The 2021 Teana features a MacPherson strut front suspension and a multi-link independent rear suspension with trapezoidal control arms. It is equipped with a 2.0L naturally aspirated engine, delivering a maximum horsepower of 156 PS, a maximum power output of 115 kW, and a peak torque of 197 Nm, paired with a continuously variable transmission (CVT).
20
4
Share

What are BMW, Mercedes-Benz, and Audi collectively referred to as?

BMW, Mercedes-Benz, and Audi are collectively referred to as BBA. BBA represents the joint abbreviation of Mercedes-Benz, BMW, and Audi, with each letter standing for the first letter of these brands' English names. Mercedes-Benz is a German automotive brand renowned for luxury and high performance, headquartered in Stuttgart, Germany, and is a member of the Daimler AG group, offering a variety of passenger cars and medium to large commercial vehicles. BMW is a German automotive brand under the BMW Group, featuring models such as the i, X, Z, and pure numerical series like 1, 2, 3, along with the M series, which are enhancements based on these series. Audi is a luxury car brand under the Volkswagen Group's subsidiary Audi AG, representing high technological standards, quality benchmarks, innovation capabilities, and classic car models, making it one of the prominent automotive brands.
10
1
Share

What type of fuel should be used for a compression ratio of 10?

97# gasoline is required. Below is the relevant information: 1. Minimum working volume of the cylinder: This refers to the total volume above the piston when it is at the top dead center, known as the combustion chamber volume, denoted as Vc. The total volume above the piston when it is at the bottom dead center, which is the maximum volume of the cylinder, is called the total cylinder volume, denoted as Va, i.e., ε=Va/Vc. 2. Compression ratio: The compression ratio indicates the degree to which the gas in the cylinder is compressed when the piston moves from the bottom dead center to the top dead center. The compression ratio is one of the important parameters of an engine. For modern automotive engines, due to the limitation of knocking, the compression ratio of gasoline engines is generally between 8-11. Diesel engines, not limited by knocking, generally have a compression ratio between 12 and 22.
6
0
Share

Do You Need to Replace Two Tires When One is Damaged?

Replacing two tires when one is damaged is not always necessary. It depends on the wear condition of the other tire. If the other tire is severely worn, it's best to replace both tires together. If the tires haven't been used for long, you can replace just the damaged one. When replacing a single tire, it's advisable to choose the same brand and tread pattern as the other tires on the vehicle. Below are some daily maintenance tips for tires: 1. Pay Attention to Tire Pressure: Both underinflation and overinflation can affect the lifespan of the tire. Overinflation reduces deformation and contact area with the ground, increasing the unit pressure on the central part of the tread and accelerating wear. This leads to central tread wear, affecting comfort and reducing tire longevity. 2. Avoid Overloading: Overloading significantly impacts tire life. The heavier the vehicle's load, the shorter the tire's lifespan, especially when overloaded. Legitimate tire manufacturers mark their tires with a load index. Tires should be used within the maximum load capacity corresponding to the specified load index.
8
5
Share

What are the trunk dimensions of the Audi Q3?

Width approximately 1000mm, depth 890mm-1520mm, height about 780mm - these are the trunk dimensions of the Audi Q3. How to open the Audi Q3 trunk: Press the unlock button on the handle inside the driver's door to open the trunk; the vehicle must be parked and turned off for full unlocking, or when the vehicle is locked, press the trunk unlock button on the remote for more than 3 seconds to open the trunk separately. Besides regular cargo loading, the Audi Q3's trunk has several additional functions: During long-distance trips, owners may store water in the car, utilizing the trunk's built-in hooks. Similarly, when purchasing aquatic products, these hooks can be used to hang them, preventing water from spilling into the trunk. For fragile items or those needing stabilization, the trunk's elastic net can secure these items in place. In emergency situations where someone is trapped inside the vehicle, the trunk's emergency release loop can be used to open the trunk and escape.
20
5
Share

Is the P light in red indicating the handbrake is engaged?

P light in red indicates the handbrake is engaged. The function of the handbrake is to brake when parking on flat ground or slopes, preventing the vehicle from sliding automatically in an unmanned state and avoiding traffic accidents. The correct method to engage the handbrake is: 1. Press the handbrake button before pulling it; 2. Apply gentle force when pulling the handbrake; 3. Pull the handbrake up to about 70% - pulling it to the highest point will shorten the service life of the handbrake cable. The hazards of forgetting to engage the handbrake while driving include: 1. The brake pump cannot provide sufficient braking force, causing the engine to stall; 2. Accelerated wear of the brake disc and hardening of the brake pads due to friction heat; 3. Elongation of the handbrake cable; 4. Brake fluid leakage from the brake caliper, leading to brake failure.
5
2
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.