What brand is gfitas01?

What does it mean when the BMW engine yellow light comes on?

There are many possible reasons for the engine light to come on, which can be roughly divided into three categories: a fault code is reported, but the engine is working normally. It may be that an operation at some point exceeded the computer's control range. The fault code fed back by the computer can be eliminated first, and then check whether the fault code still appears. Minor faults: The engine has no obvious faults. According to computer detection information and further inspection, certain faults are found that do not affect normal driving or have minimal impact. These need to be identified and resolved in a timely manner. For example, a faulty intake pressure sensor. Major faults: Such faults can be felt by the naked eye and driving experience, seriously affecting the normal operation of the engine and requiring immediate repair. For example, obvious lack of engine power may be due to an oxygen sensor issue. Solution: When the vehicle fault light comes on, it is mostly caused by the fuel emission system. When the fault light is on, start and turn off the vehicle three times, then observe whether the fault light remains on. If it does, it is necessary to promptly check the fault code at a repair shop to determine whether it is an engine problem or a sensor fault. If the light does not come back on, it may be a sporadic fault and does not require immediate inspection. When the computer receives parameters from the oxygen sensor indicating that the exhaust emissions severely exceed the national legal standards, the internal program of the computer cannot correct it to the standard range. At this time, the engine control computer will issue a pollution emission warning light (yellow pollution light) through the instrument panel to remind the owner to check the engine pollution emission light at a repair station. It is recommended to go to a professional 4S shop for testing, maintenance, and repair, where professional technology is combined with top-notch testing equipment.

11

4

Share

What are the pros and cons of applying glue to tubeless tires?

The advantage of applying glue to tubeless tires is that it can quickly seal air leaks. Typically, after using tubeless tire sealant, it solidifies in about 5 minutes. However, the downside is that excessive use of glue can corrode the wheel rims, and it cannot repair large punctures, has poor effectiveness on cracks, and is ineffective for repairing sidewall perforations. There are various methods for repairing tubeless tires, with the most convenient and quickest being the use of sealant, which involves applying glue to tubeless tires. The sealant can quickly seal air leaks but is somewhat corrosive and is generally only applied once. If the tire is damaged again and leaks air, it is recommended to use more professional repair methods or replace the tire if necessary. When using tubeless tire sealant, it is injected into the tire through the valve stem. As the car moves, the centrifugal force causes the sealant to evenly coat the inside of the tire, forming a sealing film on the inner surface to achieve the repair effect.

2

1

Share

Does Vehicle Damage Insurance Cover Cars Submerged in Heavy Rain?

Vehicle damage insurance does cover cars submerged in heavy rain. Losses to insured motor vehicles caused by natural disasters fall under the scope of vehicle damage insurance, and most insurance companies will provide compensation. Below is an introduction to the essential insurance policies for new cars: 1. Compulsory Traffic Insurance: The first insurance policy to purchase for a car is compulsory traffic insurance, and the law mandates that this insurance must be obtained when buying a car. Otherwise, new drivers cannot license their cars, and experienced drivers cannot drive on the road. Driving without compulsory traffic insurance will result in severe penalties. 2. Third-Party Liability Insurance: Third-party liability insurance primarily covers compensation for direct personal injuries or property damage to others caused by accidents involving the insured vehicle during use. Accidents are the last thing drivers want to encounter, as they not only damage their own cars but also require significant compensation to others. 3. Vehicle Damage Insurance: Commonly referred to as car damage insurance, this differs from vehicle stoppage loss insurance. It covers losses to the insured vehicle caused by natural disasters or accidents within the insurance liability scope, allowing for corresponding compensation. However, it does not include losses caused by earthquakes to the vehicle.

12

5

Share

How to Get a Driver's License with Color Weakness?

Mild color weakness does not prevent one from obtaining a driver's license, except for those who cannot clearly distinguish red, yellow, and green traffic lights. The physical requirements for applying for a motor vehicle driver's license are as follows: 1. Height: Applicants for large buses, tractors, city buses, large trucks, and trolleybuses must be at least 155 cm tall. Applicants for medium-sized buses must be at least 150 cm tall. 2. Vision: Applicants for large buses, tractors, city buses, medium-sized buses, large trucks, trolleybuses, or trams must have uncorrected or corrected visual acuity of at least 5.0 on the logarithmic visual acuity chart. For other vehicle types, uncorrected or corrected visual acuity must be at least 4.9. 3. Color vision: No red-green color blindness (Note: color weakness is not the same as color blindness, so there are no restrictions based on the regulations themselves). 4. Hearing: Able to distinguish the direction of sound sources with each ear at a distance of 50 cm from a tuning fork. Those with hearing impairments who can meet the above conditions with hearing aids may apply for a driver's license for small cars or small automatic transmission vehicles.

3

4

Share

Where to Check the Battery Level of a Car?

You can check the battery level of a car through the inspection eye on the battery. Open the front hood, locate the inspection eye on the battery, and the owner can determine the remaining battery level based on the color displayed by the inspection eye. If the inspection eye is green or blue, it indicates that the battery has sufficient charge. If the inspection eye shows black or red, it means the battery is low on charge and needs recharging. If the inspection eye displays white, it indicates that the battery needs replacement. You can also pay attention to the battery warning light on the dashboard. When the warning light is on, the owner can press the car horn. If the sound is noticeably weaker than usual, it indicates that the battery is low on charge. Methods for charging a car battery: Connect the charging cables to the positive and negative terminals of the battery, adjust the charging current, and proceed with charging. It is important to note that the charging current should be one-tenth of the battery's capacity. For example, a 60Ah battery typically requires 8-10 hours of charging. Car battery maintenance methods: If the car needs to be parked for an extended period, start the engine regularly to prevent the battery from losing charge due to prolonged inactivity. For situations where the car will be parked for a long time and it is not possible to start the vehicle to recharge the battery, you can disconnect the positive and negative terminal cables before parking. Note that when removing the terminal cables, disconnect the negative cable first, followed by the positive cable. When reconnecting, do the opposite: connect the positive terminal first, then the negative terminal. Regularly inspect and clean the battery terminals, accessories, and connecting wires. Apply specialized grease to the terminals to protect the wiring harness.

5

1

Share

Does Audi Still Burn Engine Oil?

Audi has some models that experience engine oil burning, which refers to the engine oil entering the combustion chamber of the engine and participating in combustion along with the air-fuel mixture. Below is an introduction to the causes of engine oil burning: 1. Poor Cylinder Sealing: This is mainly due to excessive clearance between the piston and cylinder wall, improper installation or poor sealing of piston rings, allowing the cylinder wall to enter the combustion chamber, resulting in fuel burning. Poor sealing performance of the valve seal ring, damage to the crankcase ventilation valve, or blockage of the crankcase exhaust port can cause excessive pressure in the crankcase, leading to engine oil entering the cylinder along with crankcase gases and burning. 2. Choosing Higher Viscosity Engine Oil: For some older cars, engine oil burning is relatively normal. You can choose engine oil with slightly higher viscosity to enhance the sealing between the piston and cylinder wall. Of course, the ultimate solution to oil burning is a more thorough inspection and repair of the car to fundamentally resolve the issue. High-end cars typically use fully synthetic oil, and even many supercars use high-fluidity 0W-50 series supercar oil. High-fluidity oil means thinner viscosity, which allows detergents to evaporate, offering many benefits. However, a downside is that because it is thinner, the proportion of oil entering the combustion chamber from the cylinder and piston rings is higher, leading to naturally higher oil consumption compared to family cars.

17

3

Share

What brand is gfitas01?

What does it mean when the BMW engine yellow light comes on?

What are the pros and cons of applying glue to tubeless tires?

Does Vehicle Damage Insurance Cover Cars Submerged in Heavy Rain?

How to Get a Driver's License with Color Weakness?

Where to Check the Battery Level of a Car?

Does Audi Still Burn Engine Oil?

Is the Volkswagen Tayron equipped with a dry or wet transmission?

Do I need to turn on the turn signal for uphill fixed-point parking?

What is the reason for the frequent central brake light error in the Audi A4L?

What are the engine specifications of the Sagitar?