What brand is Genesys tires?

1 Answers
LeJayden
07/29/25 5:19pm
Genesys is a tire series under the Shandong Wanda Boto Tire brand. Shandong Wanda Boto Tire Co., Ltd. is a wholly-owned subsidiary of Wanda Group, located in the Wanda Group High-Tech Industrial Park, covering an area of 320,000 square meters, with a factory area of 170,000 square meters. It is one of the large-scale enterprises in China specializing in the production of all-steel radial tires, semi-steel radial tires, engineering machinery radial tires, and light truck tires. Shandong Wanda Boto Tire Co., Ltd. mainly operates high-end sports series tires, mid-range comfort tires, ultra-long wear-resistant series tires, SUV off-road series tires, winter series tires, and commercial vehicle series tires. Tires are often used under complex and harsh conditions, enduring various deformations, loads, forces, and high and low temperatures during driving. Therefore, they must have relatively high load-bearing performance, traction performance, and cushioning performance, as well as high wear resistance and flex resistance, along with relatively low rolling resistance and heat generation. They are in direct contact with the road surface and work together with the vehicle suspension to cushion the impact during driving, ensuring good ride comfort and smoothness, maintaining good adhesion between the wheels and the road surface, improving the vehicle's traction, braking, and passing performance, and bearing the weight of the vehicle. Wanda Boto Tire maintenance methods: Increase awareness of tire safety and inspect tires more frequently. Regularly correct wheel balance; unbalanced wheels can cause high-frequency oscillations during high-speed driving, leading to uneven tire wear. Regularly rotate tires; to maintain even wear on the tires of the same vehicle, rotate the tires every 5,000 kilometers. In daily use of Wanda Boto tires, pay attention to the following points: Regularly check the tire surface for cracks, deformations, and other defects. Due to driving wear, the tread grooves gradually become shallow. If the tread is worn flat, it will lose its drainage and anti-slip functions, significantly reducing the vehicle's performance. Small cracks may pose a risk of tire blowouts during high-speed driving. Additionally, immediately remove pebbles from the grooves. Park on level ground as much as possible. Avoid parking on roads with thick, sharp, or pointed stones. Do not park near or in contact with petroleum products, acids, or other materials related to rubber deterioration. After parking, do not turn the steering wheel, as this will accelerate tire wear. Do not splash water to cool down. In hot weather or during high-speed driving, tires are prone to overheating, and the pressure will increase. In such cases, stop to let the tires cool down. Do not release air to reduce pressure or splash water to cool down, as this can cause abnormal aging of the tread rubber. Avoid sudden braking. Try to minimize frequent use of brakes and emergency braking to prevent accelerated tread wear due to dragging between the tires and the ground.
Was this review help?
4
1
Share
More Forum Discussions

Does Full Coverage Auto Insurance Include Water Damage Insurance?

Full coverage auto insurance does not include water damage insurance. Full coverage typically refers to compulsory traffic insurance, vehicle damage insurance, third-party liability insurance, no-deductible coverage, passenger insurance, glass insurance, theft insurance, and other types of coverage. Water damage insurance is not an independent insurance product and cannot be purchased separately; it is an additional insurance product attached to basic coverage. Car owners must first purchase the main vehicle damage insurance before adding water damage insurance. Below is additional information: 1. Water Damage Insurance: Water damage insurance is a newly derived type of auto insurance, primarily referring to an additional coverage purchased by the car owner for the engine. It mainly provides compensation for engine damage caused by driving through waterlogged roads or submersion. 2. Non-claimable Situations: Engine damage caused by a second start; damage or repairs to the insured vehicle due to incidents outside the scope of the auto damage insurance liability; repairs required due to substandard repair quality at non-insurer-approved repair shops; delays in vehicle repairs by the insured or driver.
15
2
Share

What is the solution for Volkswagen P001600 fault code?

Fault code P001600 refers to a malfunction in the correlation between the crankshaft position and camshaft position. The meaning of fault code P001600 is that the allocation of the camshaft position/crankshaft position sensor in cylinder bank 1 is incorrect. This fault may be caused by incorrect phasing. Check the camshaft/crankshaft phasing, and if tooth skipping is found, the timing needs to be corrected. Below is an introduction to car maintenance: 1. Introduction to car maintenance: Car maintenance refers to the preventive work of regularly inspecting, cleaning, replenishing, lubricating, adjusting, or replacing certain parts of the car, also known as car servicing. 2. Scope of car maintenance: Modern car maintenance mainly includes the engine system, transmission system, air conditioning system, cooling system, fuel system, power steering system, etc. 3. Purpose of car maintenance: The purpose of car maintenance is to keep the car clean, maintain normal technical conditions, eliminate potential hazards, prevent faults, slow down the deterioration process, and extend the service life.
17
5
Share

What Are the Reasons for High Car Water Temperature and Fan Not Turning?

There are two main reasons for a car running at high temperature with the fan not turning. One is a damaged car radiator fan motor. The other is a blown fuse or faulty relay supplying power to the fan. Both situations require timely replacement of the damaged components. Below is detailed information about car radiators: 1. Overview: The radiator is part of the car's cooling system. The radiator in a car engine's cooling system consists of three main parts: the inlet tank, outlet tank, header, and radiator core. 2. Additional Information: Coolant flows inside the radiator core while air passes outside it. The hot coolant cools down by transferring heat to the air, while the cold air heats up by absorbing the heat dissipated by the coolant. Thus, the radiator functions as a heat exchanger.
13
4
Share

Where is the air intake on a scooter?

The air intake of a scooter is located at the upper front part of the engine, specifically at the intake pipe position between the carburetor and the engine. Here is some related information: 1. Gasoline engine drive: A motorcycle is a two- or three-wheeled vehicle driven by a gasoline engine, steered by handlebars to control the front wheel. It is lightweight, flexible, and fast, widely used for patrol, passenger and cargo transportation, and also serves as sports equipment. 2. Types: Motorcycles are divided into street bikes, road racing motorcycles, off-road motorcycles, cruisers, and touring bikes. 3. Components: A motorcycle consists of five main parts: the engine, transmission system, running gear, braking system, and electrical instrumentation. The transmission system of a motorcycle includes primary reduction, clutch, gearbox, and secondary reduction.
8
5
Share

What to Do When There's Air Leakage Between a Tubeless Tire and the Rim?

Here are the reasons and solutions for air leakage between a tubeless tire and the rim: 1. Tire Bead Issues: If the tire bead has cracks or missing parts, it will cause air leakage. Aging of the tire bead can also lead to leakage, in which case the tire needs to be replaced. If there is excessive mud or sand on the tire bead, or if it is not clean, it can also cause leakage, so the tire should be cleaned. 2. Rim Edge Problems: If the rim edge is rusty (the part that contacts the tire bead), it can be polished with a grinding wheel or sandpaper. If the rim is severely deformed, cannot be rounded, and still leaks air after adjustment, then it should be replaced with a new rim.
4
2
Share

Is Signing Once Enough for Subject Three?

After completing Subject Three, you only need to sign once to confirm your electronic transcript. Here are specific details about Subject Three: 1. Overview: Subject Three, also known as the road test, is part of the motor vehicle driver's license examination. It refers to the road driving skills and safety-conscious driving knowledge test. 2. Others: Starting from June 1, 2021, the scheduling interval for Subject Three was adjusted from 30 days after passing Subject One to 20 days. For those applying for additional licenses for large and medium-sized passenger or cargo vehicles, the interval was adjusted from 40 days to 30 days after passing Subject One.
12
3
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.