What brand is Ford Platinum?

What is the fuel consumption of the Venucia V in liters?

The average fuel consumption reported by Venucia V owners is 8.0 to 8.5L/100km, while the MIIT comprehensive fuel consumption rating is 6.6L/100km. Venucia V's powertrain: The Venucia V is equipped with Mitsubishi's latest 1.5T turbocharged engine, delivering a maximum power of 140kW (190hp) at 5500rpm and a peak torque of 260N.m between 1500-4500rpm. Paired with a 7-speed dual-clutch transmission, it achieves an official 0-100km/h acceleration time of 8.8 seconds and a combined fuel consumption of 6.6 liters, offering significant improvements in both driving performance and fuel efficiency. Fuel-saving tips: You can improve fuel economy by developing good driving habits. Maintain steady speeds during normal driving, avoid aggressive acceleration and braking, and refrain from frequent lane changes. Regularly check that tire pressures meet standards, periodically clear out unnecessary items from the vehicle, and avoid opening windows when driving at high speeds.

5

3

Share

Will Points Be Deducted for Parking at an Angle in Reverse?

Parking at an angle in reverse will not result in point deductions as long as the vehicle body does not cross the lines. Below are relevant precautions for the reverse parking test in Subject 2 of the driving exam: 1. Starting Point: When driving to the starting position, ensure the vehicle body is at the correct distance from the line. The body should cover the white line at the front right of the parking space but not exceed it. 2. Reversing: While reversing, accurately align with the reference points, turn the steering wheel fully, and use the rearview mirror to align with the parking space markers. 3. Entering the Parking Space: Once the vehicle enters the parking space, straighten the wheels and avoid turning left or right; do not reverse too far—stop immediately upon entering. 4. Exiting Left: When exiting left, monitor the distance between the left side of the vehicle and the parking space lines, adjusting the steering wheel as needed; ensure the vehicle reaches the designated position before stopping. 5. Five Prohibitions: Throughout the process, do not stop, roll back, shift gears incorrectly, stall the engine, or cross the lines.

14

1

Share

What are the differences between Volkswagen Golf and Polo?

Volkswagen Golf and Polo differ in space, dimensions, and power. Space-wise: Although the two cars belong to different classes, the new POLO's 3970mm length is one of the largest in the A0-class hatchback category. In contrast, the Golf's 4199mm length is the shortest among A-class hatchbacks. This difference in length results in only a 229mm gap between the two cars, similar to the size differences seen among many cars in the same class. Power-wise: Both the Golf and Polo are equipped with a 1.6L naturally aspirated L4 engine, with a maximum output of 110 horsepower and a maximum torque of 155 Nm, paired with a 6-speed automatic transmission and a 7-speed dual-clutch transmission. The same engine delivers strong performance in the A0-class POLO, while it is just adequate in the A-class Golf. Therefore, despite having the same power, the POLO's acceleration capability is superior to the Golf's. Dimension-wise: Volkswagen Golf: Dimensions are 4199x1786x1479mm. Volkswagen Polo: Dimensions are 3970mm×1682mm×1462mm.

7

3

Share

What Causes Delayed Throttle Response in Cars?

Reasons for delayed throttle response in cars include the use of low-quality gasoline leading to incomplete combustion, malfunctioning or inaccurate ignition systems, and clogged air intake systems. Using low-quality gasoline leading to incomplete combustion: Refueling at unofficial gas stations may introduce gasoline with more impurities, often mixed with water, resulting in lower fuel calorific value and reduced thermal efficiency, causing delayed throttle response. This can also lead to carbon buildup, damaging the engine and shortening its lifespan. It is recommended to refuel at official gas stations. Malfunctioning or inaccurate ignition systems: If the ignition system is not functioning properly or accurately, it can cause unstable voltage output, leading to inconsistent ignition. The most common issue is with the spark plugs, such as severe carbon buildup, insufficient ignition voltage, or reaching the end of their lifespan. Depending on the situation, the spark plugs may need cleaning or replacement. Clogged air intake systems: A clogged air intake system increases the engine's air intake resistance, reduces oxygen content, leads to incomplete fuel combustion, decreases power output, and causes delayed throttle response. Generally, the throttle body needs to be cleaned.

15

0

Share

What Causes Abnormal Noise When Braking in Reverse?

Abnormal noise when braking in reverse is caused by the use of inferior brake pads, foreign objects between the brake pads and brake discs, or improper installation of brake pads. Use of inferior brake pads: When brake pads rub against the brake discs, abnormal noise occurs. Therefore, it is essential to use high-quality brake pads when replacing them. The noise will gradually diminish as the brake pads and discs wear in, and braking performance will improve without requiring special treatment. However, avoid hard braking as much as possible, as it can accelerate wear and reduce the lifespan of the brake components. Foreign objects between the brake pads and brake discs: During normal driving, it is inevitable to encounter rough road conditions. Due to the unique design of disc brakes, sand or other debris may get lodged between the brake pads and discs, causing abnormal noise when braking. Try pressing the brakes firmly several times to help dislodge the particles. Improper installation of brake pads: Issues such as brake pads being too tightly fitted to the caliper or installed backward can also cause abnormal noise. Reinstalling the brake pads or applying specialized lubricant to the contact points between the brake pads and caliper can resolve the issue.

16

4

Share

What is the function of a car inverter?

Car inverters can maximize the performance of solar batteries and provide system fault protection. The role of car inverters: A car inverter (power converter, Power Inverter) is a device that converts DC12V direct current into AC220V alternating current, which is the same as the mains supply, for use by general electrical appliances. It is a convenient vehicle power converter. It features automatic operation and shutdown functions, maximum power tracking control function, anti-islanding function, automatic voltage adjustment function, DC detection function, and DC grounding detection function. Precautions for using inverters: Strictly follow the instructions in the user manual when using the inverter; place it in a safe place to prevent electric shock; disconnect the input power when not in use; do not place the inverter in direct sunlight or near the outlet of a heater. The operating environment temperature of the inverter should not exceed 40 degrees Celsius; the inverter will generate heat during operation, so do not place items near or on top of it; the inverter is afraid of water, so do not expose it to rain or spill water on it.

16

5

Share

What brand is Ford Platinum?

What is the fuel consumption of the Venucia V in liters?

Will Points Be Deducted for Parking at an Angle in Reverse?

What are the differences between Volkswagen Golf and Polo?

What Causes Delayed Throttle Response in Cars?

What Causes Abnormal Noise When Braking in Reverse?

What is the function of a car inverter?

Are Gasoline Cars or Diesel Cars More Fuel-Efficient?

What is the purpose of the Type-C interface in a car?

What are the damages to a car if it idles for seven or eight hours?

How Far Can the Car Key Be to Unlock the Car?